ANCwear ANC-207 Smart Watch Fitness Tracker User Manual

**ANCwear ANC-207 Smart Watch Fitness Tracker User Manual

**

Get Started

Product parameters

Set up Your Watch

Charge your watch

Please fully charge your watch before initial use.

1. Insert the USB plug of the charging cable into the USB port on your computer or a UL-certified USB wall charger.
2. Hold the other end of the charging cable near the port on the back of the watch until it attaches magnetically.

Attach / Remove your watch Attach

To attach the wristbands, slide the pin (the side opposite the quick-release lever) into the notch on the watch. Attach the wristband with the clasp to the top of the watch. Press down on the quick-release lever to connect both ends.

Remove

To remove the wristbands, find the quick-release lever then press it inward, gently pull the wristband away from the watch to release it.

Use Your Watch

Connect smart watch to your phone

1. Download the “Da Fit” app Search for “Da Fit” in the App Store or Google Play Scan the QR code below
   Note:

   • The “Da Fit” app is only compatible with smartphones, not tablets or PCs.
   • Smartphone operating system should be iOS 9.0 / Android 5.0 or higher.

2. Pair the watch with your phone

Please pair the watch with your phone in the “Da Fit” app, NOT in the Bluetooth settings of your phone.

• Enable the Bluetooth of your smartphone.
• Open the “Da Fit” app and go to the “Device” page, tap “ADD A DEVICE”, then your smartphone starts searching devices. Find the smart watch named “ANC-207” and connect it.

NOTE: The watch can only pair with one smartphone at a time. When pairing, please make sure the watch has no connection with other phones.

Get to Know Your Watch

Watch interfaces

This is a touch screen, swipe the screen to go to different interfaces, and tap to enter the function.

• Swipe down to enter Status Bar.
• Swipe up to see message notification.
• Swipe left to the function list, including step, sleep, heart rate, exercise mode, BP, SpO2, exercise mode, weather, music control, setting, etc.
• Long press the home page to change the watch face.

Icons introduction

Function introduction

Steps
Smart watch automatically tracks steps taken on the screen.
NOTE: Your movement stats reset to zero at midnight.

Sleep
The watch automatically tracks your sleep duration and quality with a comprehensive analysis of sleep quality data.

Heart Rate
The smart watch could record your heart rate all day; tap on the page to start measuring heart rate.

Exercise Mode
Tap the icon on the menu to start a new exercise mode, there are 24 sport modes to be chosen.

Blood Pressure
Tap on the blood pressure page to start measuring your blood pressure.
It could show the measured data of last time.

SpO2
Tap the SpO2 page to start measuring your SpO2.
It could show the measured data of last time.

Weather
It could show the weather information of current and next 6 days on the weather page.

Shutter
After connecting the device, you can remote control the camera on your phone.
NOTE: When using the shutter, please open the “Da Fit” app.

Player
PS: For Android phones, please set up your smartwatch to control your phone’s music on the “Da Fit” APP.

Alarm
Set up the alarm on the app, the device will vibrate to remind on time.

Stopwatch
Tap the start button on stopwatch page to start timing, and tap the stop button to stop timing.

Period
Turn on the “Physiological cycle reminder” button in the app and set the relevant data, you could check your period on the watch.

Setting

• Display

  1. Auto Sleep
     Tap the “Auto Sleep” button to set the watch’s screen-on time.

  2. Menu View
     In “Menu view”, you could choose your preferred menu style.

  3. In the “Display”, you could also use the “Brightness” and “Flashlight” function.
     

• Vibration
  You could set the vibration mode of the watch, including Strong, Soft and Off.

• Low Power Mode
  Open this button, it will turn off vibration, quickview, and turn down the brightness.

• More Setting
  In settings, you could also set theater mode.
  In “System”, you could restart, power off and reset your watch.

Get to Know “Da Fit” App

APP interface

View data chart on app

Watch faces

Open APP–>Device–>WATCH FACES

Notification

Open APP–>NOTIFICATIONS–>Open the message reminder

Alarm

Open APP–>Device–>ALARMS

Other settings

Open APP–>OTHERS

Notice

Warranty

• One year warranty for manufacturing defects.
• Any quality defects, contact us, you will get A Full Refund or A Free Replacement!

Important Instructions

Please read the safety guidelines on the following pages to ensure proper use and care

• Do not expose your device to liquid, moisture, humidity or rain while charging, do not charge your device when it is wet, as this may result in electrical shock and injury.
• Do not expose your watch to extremely high or low temperatures.
• Do not use your device in a sauna or steam room

Battery Warnings

A lithium-ion battery is used in this device. When using this smart watch, please observe the following guidelines for using batteries.

• Do NOT disassemble, modify, puncture or damage the device or batteries.
• Do NOT remove or attempt to remove the non-user-replaceable battery.
• Do NOT expose the device or batteries to fire, explosion, or other hazards.

Health Reminder

• If you have a pacemaker or other internal electronic device, consult your physician before using a heart rate monitor.
• The device is intended to be used only for general fitness purposes, not for medical purposes, and are not intended to prevent any disease or condition.
• No matter what the situation, if your skin is uncomfortable, remove the watch.
• The smart watch relies on sensors that track your movements and other metrics. The data and information provided by these devices are intended to be a close estimation of your activity and metrics tracked, but may not be completely accurate due to be limited by technology, including step, sleep, heart rate, blood oxygen, and blood pressure.

Maintenance

• Regularly clean your wrist and the smart watch, especially after sweating during exercise or being exposed to substances such as soap or detergent which may adhere to the internal side of the watch.
• While the watch is water resistant, wearing a wet band is not good for your skin.
• Do not bring your device into contact with any sharp objects, as this could cause scratches and other damage.

FAQs

Q: Why is failure to receive SMS / calls notification?
A: Calls / SMS notification function works when the watch connects to your smartphone via the app.

• Go to your smartphone setting, find the “Da Fit” app, enable the Notifications.
• Make sure the watch is connected with your smartphone.
• Open the app, find the “Notification”, turn on the corresponding message reminder.
• Make sure the “Do Not Disturb” function is not enabled on the app and watch.

Q: How is the HR / BP / SpO2 measurement accuracy?
A: The measurement data will be affected by factors such as motion, watch placement on the wrist and skin condition, etc. These factors will cause fluctuations.

• When measuring, please bring the sensor close to the skin and contact well.
• Please keep the bottom of the sensor clean during measurement.
• The smart watch sensor isn’t a medical device and won’t be able to diagnose or monitor any medical conditions. If there is a problem with the measurement, we recommend you consult your doctor.

Dear Customer,

Thank you very much for choosing our Smart Watch.
ANCwear is always been committed to providing superior products and services. We hope that our products can not only meet your basic needs, but also bring more health and happiness to your life.
If you have any questions or suggestions regarding our products, please contact us! Highly appreciate getting your objective review. We will listen patiently and solve the problems whole heartedly.
Wish you all the best!

Yours sincerely,
ANCwear Service Team

Customer Support:
 Email: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>