1MORE HQ30 SonoFlow SE Cancelling Headphones User Guide

HQ30 Nonflow SE Cancelling Headphones
User Guide

HQ30 SonoFlow SE Cancelling Headphones

Tanilba Corporationhttp://www.1more.com
For warranty purpose

Power On: Press and hold for 2S
Power Off: Press and hold for 5S
Playback
Play / Pause: Click
Phone Call
Answer / Hang up: Click
Switch to the mobile phone: Double click
Decline: Press and hold for 2S
Voice Assistant (Bluetooth on and not in a call): Double click
ANC ON / Pass-through / ANC OFF (Switch in turn): Click
Volume +: Click
Previous Track: Press and hold for 2S
Volume -: Click
Next Track: Press and hold for 2S
Extra Functions

1. Unpairing: Press and hold “+” and “”-” buttons for 5 seconds, the headphones will switch to automatic discovery mode.
2. Security pairing: If the pairing phone has Bluetooth prior to 3.0, please use the default security code “0000”.
3.  Battery/Volume display: Currently supports iOS only; may not support other operating systems.
4.  Out of wireless connection range: The headphones will try to reconnect for 3 minutes. Then they will turn off automatically if not connected to any device..
5.  OTA Firmware Update: It can be synchronously upgraded via the 1MORE MUSIC APP while the headphones are connected to each other with at least 10% battery.

• Functions of the 1MORE MUSIC APP may vary with different devices or operating systems. For more details, please contact our customer service.

1MORE (1) Year Limited Warranty
1MORE warrants to the original retail purchaser that this product is to be free from defective materials and workmanship for a period of one year from the date of purchase if it is properly used and maintained. If this product proves defective in either material or workmanship, 1MORE, at its option, will (a) repair the product with new or refurbished parts, or (b) replace the product with an equivalent new or refurbished product, at no charge for parts or labor. If the product model is no longer available and cannot be repaired effectively or replaced with an identical model, 1MORE at its sole option may replace the unit with a current model of equal or greater value. In some cases, modification to the mounting surface may be required where a new model is substituted. 1MORE assumes no responsibility or liability for such modification. TO OBTAIN A REPAIR OR REPLACEMENT UNDER THE TERMS OF THIS WARRANTY, PLEASE RETURN TO THE ORIGINAL DEALER FIRST AND THE ORIGINAL DEALER SHALL REPAIR THE PRODUCT WITH NEW OR REFURBISHED PARTS OR REPLACE THE PRODUCT WITH AN EQUIVALENT NEW OR REFURBISHED PRODUCT.
You will be required to submit a proof of purchasing details, including but not limited to a receipt or sales invoice.
Return shipping for exchanges/repairs is the sole responsibility of the original retail purchaser.
Limitations:

• This limited warranty does not cover the failure of the product resulting from improper installation, misuse, abuse, accident, neglect, mishandling, or wear from ordinary use or environmental deterioration.
• This limited warranty does not cover cosmetic damage, including paint damage, or consequential damage to other components or premises which may result for any reason from the failure of the product.
• This limited warranty is null and void for products not used in accordance with 1MORE’s instructions.
•  This limited warranty is null and void for products with altered or missing serial numbers and for products not purchased from an AUTHORIZED dealer.
• This limited warranty terminates if you sell or otherwise transfer this product to another party.

We Appreciate Your Business
We know you will enjoy new 1MORE headphones as much as we do. At 1MORE, we value your satisfaction.
If you would like more details on this product or any of our other products, please visit us online by scanning the QR code. Go to www.1more.com and sign up for VIP, and 1MORE will treat you like one.
WEEE
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points. Your 1MORE retailer will advise you of the correct way of disposal in your country.
Tips

1. Please read this instruction manual carefully and retain for future reference.
2.  Please fully charge the battery before first use.
3.  If the headphones have been unused for more than 3 months, we recommend that you charge them. This will improve battery capacity.
4.  Only use chargers that are FCC (Federal Communications Commission) approved.
5. In dry environments, static electricity may numb your ear. This is not related to the quality of the product.

Safety Information

1. Never disassemble the headphones. There are no user-serviceable parts inside.
2. Do not expose the headphones to temperatures below 32 °F (0 °C) or to temperatures above 113 °F (45 °C).
3. Do not use the headphones in a thunderstorm storm. This could prevent the headphones from working properly, and also increase your chance of being electrically shocked.
4. Do not use oil or any volatile liquid to clean this product.
5. Do not listen at high volumes for extended periods of time.
6. Do not use the headphones in traffic. Do not use the headphones any time it would be dangerous to be unaware of noises around you.
7. Adult supervision is required for children of age 6 and under.

FCC

This device complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types HC306 (FCC ID: 2ASDI-HC306) has also been tested against this SAR limit.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

IC

This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
This device has been tested for compliance with IC SAR values at a typical operating near the body. To ensure that RF exposure levels below the levels tested, use accessories with this equipment to maintain a minimum separation distance of 0 cm between the body of the user and the device. These accessories should not contain metallic components. It is possible that the accessories used close to the body that do not meet these requirements are not consistent with the SAR limits and it is advisable to avoid using them.

FAQ

1. Why the headphones cannot be turned on?

Check if your headphones have enough battery life. If not, please charge them for at least 30 minutes.

2. Why the headphones cannot play music after successfully connecting to my Android device?

3. Why there is no sound from the headphones while making phone calls after successfully connecting to my Android device?

4. Why the Bluetooth connection is not stable and causes some interruptions?

1. Try shortening the distance between your headphones and device. Avoid solid barriers in between. 2) Please keep away from strong interference sources, such as Wi-Fi and GPRS. 3) Please make sure the Bluetooth antenna of your device is not blocked.

5. Why some control functions do not match those in the manual while using third party music/video player Apps?

Your operating system and the third party music/video player apps may have different settings for the control functions. We recommend that you use the music/video player apps that your device has originally provided.

• For more detailed product FAQs, please visit the product support section under www.1more.com
  Safety Caution
  Do not expose batteries or battery packs to excessive heat such as sunshine, fire or the like.
  Tiinlab Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The full text of the EU declaration of conformity is available at the following internet address:www.1more.com.
  ** Hereby, Tanilba Corporation declares that the radio equipment type HC306 is in compliance with Radio Equipment Regulations 2017(SI 2017/1206). The full text of the UKCA declaration of conformity is available at the following internet address:www.1more.com
  RF exposure information: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Radiation Exposure Statement Power is so low that no RF exposure calculation is needed. The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
  Warning**
  Replacement of a battery with an incorrect type that can defeat a safeguard (such as catching fire, explosion, leakage of corrosive electrolyte etc);
  Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
  Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas; and A battery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
  The symbol indicates DC voltage.

GHz

Operation Frequency/Max. EIRP: 2402-2480MHz, Max EIRP is 9.61dBm
The specifications are acquired from laboratory tested data.

• The playback time, tested under the laboratory condition of AAC format and 50% volume, may vary with different device setting, environments, usage and other factors.

1MORE MUSIC APP\ For users outside mainland China, please download the 1MORE MUSIC APP for product upgrades and additional features.

• APP Ul in user guide may vary and for reference only, please refer to Ul on device.

https://www.1more.com/app.htm
Manufacturer: Tiinlab Corporation
Add: N o. 3333, Liuxian Avenue, Tower A, 35th Floor, Tanglang City, Nanshan District, Shenzhen, China CMIIT ID: 2023DP8970
FCC ID: 2ASDI-HC306
IC: 24662-HC306
www.1more.com

References

• Award-Winning 1MORE Headphones
• 1MORE官网_1MORE万魔官方网站

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>