Srhythm K1 Portable Wireless Bluetooth Speaker User Manual

Srhythm K1 Portable Wireless Bluetooth Speaker

Safety Instructions

1. Before using the speaker, please read the manual carefully and keep it for future references.
2. Use original or certified cables.
3. Don’t disassemble.
4. Avoid dropping.
5. Avoid extreme temperatures. Unplug this apparatus during lightning storms or when unused for long periods of time.
6. Do not expose products containing batteries to excessive heat (e.g. from storage in direct sunlight, fire or the like).
7. Keep the product away from fire and heat sources. Do not place naked flame sources, such as lighted candles, on or near the product.
8. Turn off speaker to save power when you do not use the speaker.

Technical Specification

What’s in the Box

Srhythm K1 Speaker*1

Portable Carry Case*1

Type-C Charging Cable*1

3.5mm Audio Cable*1

Wrist Extension Strap*1

Quick Start Guide*1

    At a Glance

How to Use

Turn on / of

Press and hold the Multi-function Button for 3 seconds to turn on the Bluetooth speaker.

Press and hold the Multi-function Button for 2 seconds to turn off the Bluetooth speaker.

*Srhythm K1 will automatically turn off after 10 minutes if no device is connected.

Pair with your device

Step 1: Turn on the Bluetooth speaker, then enter into pairing mode.

Step 2: Keep the speaker and your mobile phone as close as possible during pairing process.

Step 3: Turn on the Bluetooth on your cell phone. Search for the Bluetooth speaker signal on your phone. Click on “Srhythm K1”.

Connect via Aux

Press and hold the Multi-function Button for 3 seconds to turn on the Bluetooth speaker.

Connect the speaker via Aux.

/

AUX mode is unavailable when out of battery.
When using AUX mode, volume/play/pause control works on the Bluetooth speaker, but previous/next song control must be done from the connected device.

Charge the speaker

Please use original or certified cables to charge your speaker.

Function Details

Product Dimension

FCC Caution

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions： (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may cause undesired operation.

IMPORTANT NOTE

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures：

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>