LIGHTINGINSIDE 2AJ3WEBEBCW510 Smart Wifi LED Light Bulb User Guide

**LIGHTINGINSIDE 2AJ3WEBEBCW510 Smart Wifi LED Light Bulb User Guide

**

START GUIDE

Get Ready

• Know your Wi-Fi network and password
  iOS 9
  
  **Android 5.0

**

• Make sure your mobile device is running iOS 9 or higher or Android 5.0 or higher
• Make sure you’re connecting to a 2.4GHz Wi-Fi network (Smart bulbs can’t connect to 5GHz networks)
  2.4GHz
  

System Requirements

• Mobile device running iOS 9 or higher or Android 5.0 or higher
• Existing Wi-Fi Network

Technical Specifications

• Input: 110-130V, 50/60HZ
• Life Span: 25,000 Hours
• Wi-Fi: IEEE 802.11 b/g/n, 2.4GHz (Not compatible with 5GHz Wi-Fi networks)

Caution

• Suitable for damp locations.
• Do not install the device with wet hands.
• Do not use in totally enclosed luminaries.
• Bulbs may not be compatible with wall dimmers.
• This device is not intended for use with emergency exit fixtures or emergency exit lights.

DOWNLOAD & REGISTER

• Download the Smart Life App from App Store or Google Play.
  Note:

• Please make sure that you have installed the correct APP (Smart Life – Smart Living).

• This App is completely free for users.

• Register an account on your Smart Life App

1. Enter your mobile phone number or email address.

2. Enter the verification code and create a password.

3. Log in to the App

INSTALLATION

• Plug In
  Screw the light bulbs into the sockets and turn the power on. The bulb should be quickly flashing 2x per second.

If bulbs don’t flash, see reset instructions on P10

ADD DEVICE

• Open Smart Life App.Make sure WIFI and Bluetooth are enabled and make sure that Smart Life has ‘Nearby Device’ or ‘Bluetooth’ permission.

1. In the Smart Life App, on the top corner of the devices screen, tap

2. Searching nearby device automatically and wait for seconds

3. Device found and tap ‘Add

4. Choose 2.4G Wi-Fi and input password.
   “NOTE: Smart bulbs can’t connect to 5GHz networks

5. Initializing device.

6. Connected.

Choose Color and Adjust Brightness

• Lightinginside smart bulb has a broad range of color options:

1. Choose from 2700K warm white to 6500K cool white. Use the slider to adjust the brightness.

2. Swipe to the right for the RGB color wheel. Choose 16 million colors from the color wheel. Use the slider to adjust the brightness.

QUESTIONS TROUBLESHOOTING NOTICES

Frequently Asked Questions

• Can I share with family and friends?
  Yes, You can share your bulbs with family and friends who will have access to control your bulbs and other Smart Life devices. From your main device list, choose the device that your want to share. press the profile button and tap on the ‘Share Device’ button. You will be able to give or revoke sharing permissions. In order to share, the other users should already have downloaded the Smart Life App and registered a new account

• Can I group multiple smart LED bulbs together?
  Yes, you can group multiple smart LED bulbs of the same type together, by room, location, or however else you want. The same devices can be in multiple groups. (For example, create a group for ‘Bedroom’ and another group for ‘Entire House’, and your Bedroom lights can be included in both groups). From your main device list, tap on one of the devices you want to group. Press the button on the top right for advanced settings, and tap ‘Create Group’. You’ll then be able to choose which devices you’d like to group together and will be able to rename them.

• The device suddenly drops offline and becomes unreachable, what should I do?

  • Refresh the Smart Life home page in case there is a network delay.
  • Check if the password of your 2.4G Wi-Fi is changed or router is down.
  • Check if your router has a mixed 2.4G and 5G Wi-Fi band. Usually most Wi-Fi 6 mesh system routers do not have a seperate 2.4G band. Sometimes router itself would change the connection to bulbs from 2.4G to 5G band. You can set up a Guest Network with a separate SSID (Wi-Fi name), then ensure the Guest Network is only broadcasting over 2.4GHz by disabling the 5GHz Guest Network. This will give you a stable 2.4G Wi-fi network.

• What’s the wireless range?
  The range of your home Wi-Fi is heavily dependent on your home router and the conditions of the room. Check with your router specifications for exact range data.

• If my Wi-Fi/internet goes down, will smart device still work?
  Smart Life products need to be connected to Wi-Fi in order to use them remotely

• Cannot connect to Smart Life App?

  • Check if you download correct Smart Life App.
  • Check if you choose a 2.4G band Wi-Fi and enter the right password.
  • Please make sure the location access and Bluetooth access
  • are enabled on your phone control center. Check phone setting if Smart Life has ‘nearby’ permission, this is usually for Android phone only.
  • Check whether the light blinks rapidly during paring mode, if not please follow the reset instruction to initialize paring mode.
  • Please make sure smart device and phone are close during, pairing and covered with good Wi-Fi signal. Poor signal would result in ‘connection failed’.

Please scan the QR code to watch the video for detailed set-up guide.

• Bulbs flicker or flash with a dimmer switch?
  Set wall dimmer to Max setting, bulbs will stop flickering.

• How to reset the device?
  Turn bulbs on-off-on-off-on to initialize pairing mode. You’ll see the bulb flashing quickly (2x per second),then try to add bulbs again.

VOICE CONTROL GUIDE

Name and Control Each Device by Voice

To control your Lightinginside smart bulb, just ask Alexa. Make sure your devices are already set up using the Smart Life App.

*Things you can say:

**

• Alexa, turn on my bedroom light.
• Alexa, turn off the light.
• Alexa, set the bedroom light to orange.
• Alexa, set the bulb to warm white.
• Alexa, set the living room to 50%.
• Alexa, dim the living room light to 10%.

Sync to Alexa

Method One

1. Tap the icon on the right top corner

2. Tap Alexa icon, follow the instruction to link your Smart Life account to Alexa.

Method Two

1. Open the Alexa App and go to Skills in the menu.

2. Search for ‘Smart Life’ then tap Enable.

3. Authorize your account with Smart Home Skills using the username and password from your Smart Life App.

4. Choose ‘Discover Devices’, After a few seconds your Smart Life devices will be displayed under Smart Home in the Alexa App.

• Please scan the QR code to watch the video for detailed set-up guide.

• You can rename your devices in the Smart Life App, and Alexa will refer to them by the same name.
  So if you rename a smart bulb to ‘Living Room Light’ or a nickname like ‘Color Light’, then Alexa will use that same name later on.

• Alternatively, you can create an Alexa group, like ‘Bedroom’ or ‘Downstairs’, and add the device to the group.

This group made by Alexa can also support Alexa voice control.

To control your Lightinginside smart bulb, just say ‘OK Google’, or ‘Hey Google’. Make sure your devices are already set up using the Smart Life App.

*Things you can say:
**

• Hey Google, turn on my bedroom light.
• Hey Google, turn off the light.
• Hey Google, set the bedroom light to orange.
• Hey Google, set the bulb to warm white.
• Hey Google, set the living room to 50%!
• Hey Google, dim the living room light to 10%.

*Some commands require compatible devices.

Sync to Google Home

Method One

1. Tap the icon on the right top corner.

2. Tap Google Assistant icon, follow the instruction to link your Smart Life account to Google Home.

Method Two

1. Open the Google Home App and go to Home Control in the menu.

2. Tap ‘Set up device

3. Choose ‘Smart Life’ from the list of Home Control partners.

4. Authorize your account with Google Assistant using the username and password from your Smart Life App.

Now your Google Home App and Lightinginside devices are linked!
You’re now able to say ‘Hey Google’ and control your Smart Life devices.

At any time, go into the ‘Home Control’ section of the Google Home App to set nicknames and rooms for your devices. You can rename your devices in the Smart Life App, and Google Assistant will refer to them by the same name.

So if you rename a smart bulb to ‘Living Room Light’ or a nickname like ‘Color Light’, then Google Assistant will use that same name later on. You can always give it a nickname using the Google Home App as well. You can also assign smart bulbs to a specific room, like ‘Bedroom’ or ‘Kitchen’.

Google Assistant will be able to control devices by room

Add Siri Shortcuts

1. Scene – Tap to Run- Create Scene

2. Add task

3. Add task to Siri

4. Complete the voice command

5. Tap ‘Edit – Customize’ to add ‘Smart Life Short-cut’ on widget screen

6. Tap the icon or use voice command to execute the task

FCC Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement. This device complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device. should be installed and operated with a minimum distance of 20cm between the radiator and your body.

For FAQs and more information, please visit: www.lightinginside.com

WARRANTY

This lamp is warranted to be free from defects in mateial and work-manship for 2 years. Please feel free to contact us if there is any problem during the warranty period.

NEED HELP?

Our lighting specialists are trained to provide you with an exceptional experience from start to finish. For questions about product set-up, product information or to place a new order, please feel free to call or e-mail us

877-522-8599 toll-free phone (Weekdays 8am-5pm PDT/ 7am-4pm PST)

Isupport@lightinginside.com Within 12 hours

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>