SwitchBot B0B156SBD2 Smart Lock User Manual
- June 14, 2024
- SwitchBot
Table of Contents
SwitchBot B0B156SBD2 Smart Lock
Package Contents
List of Components
Getting Started
To use SwitchBot Lock, you will need:
- A smartphone or tablet with Bluetooth 4.2 or above.
- SwitchBot app (available via Apple’s App Store or Google Play Store).
- A SwitchBot account, you can register for free via our app or sign in directly.
- If you need to control SwitchBot Lock remotely, receive notifications or use third-party services, you must first set up SwitchBot Hub Mini.
- Cross-head screwdriver (included in the package).
- Wet wipe (included in the package).
Find Out More
- Please visit support.switch-bot.com/hc/en-us/sections/4408365198103 for more details.
Specifications
- Model: W1601700
- Colour: Black
- Material: PC+ABS
- Size: 111.6 × 59 x 73.2mm (4.4 x 2.3 x 2.9 in.)
- Weight: 253 g (8.9 oz) (with batteries)
- Power Source: 2 CR123A batteries
- Battery Life: Approximately 6 months
- Operating Environment: Indoor only
- System Requirements: iOS 11.0/Android OS 5.0 or later
- Communication Method: Bluetooth 5.0
- Operating Temperature: -10 °C to 45 °C (14 °F to 113 °F)
- Operating Humidity: 10 % to 90 % RH
Troubleshooting
- Please visit support.switch-bot.com/hc/en-us/sections/4408365197079 for more details.
Safety Information
- Keep your device away from heat and humidity, and make sure it does not come into contact with fire or water.
- This product is a precision-based electronic product, please avoid physical damage.
- Do not attempt to disassemble, repair, or modify your device.
- Do not use your device where wireless devices are not allowed.
Precautions
- The product cannot unlock if the battery runs out entirely. Please regularly check on the app or the LED indicator light to ensure that the battery level is not too low and replace it when needed. Please also bring your key to avoid being locked out.
- This product is for indoor use only.
- If you notice any product malfunction, please stop using it immediately and contact our Customer Support Team.
Return and Refund Policy
This product has a one-year warranty which begins from the date of purchase.
The following situations do not fit the Return and Refund Policy.
- Intended damage or abuse.
- Inappropriate storage (damages caused by dropping or soaking in water).
- Modifying or repairing of product.
- Natural wearing of product.
- Natural disasters.
Contact & Support
- Setup and Troubleshooting:
- support.switch-bot.com.
- Support Email:
- support@wondertechlabs.com.
- Feedback: If you have any concerns or problems when using our product, please kindly send feedback from the Profile > Feedback page in the SwitchBot app.
Installation Guide
Step 1: Clean the Installation Surface
- Before installing SwitchBot Lock, please make sure that the surface for installation is free from dirt or dust as this may affect your device when installing and may increase the chance of dropping at a later date.
- Use the wet wipe provided in the package or cloth with neutral detergent to clean the installation area on your door.
Step 2: Install SwitchBot Lock
-
Choose an appropriate-sized thumbturn adaptor.
-
There are 3 different adaptors provided, one has already been installed on SwitchBot Lock.
-
Install the thumbturn adaptor that suits your lock, once installed successfully you should hear a clicking sound.
- Confirm the place of installation and direction of the SwitchBot Lock.
- Confirm the following based on the position of your lock and handle:
- Sufficient space near the thumb turns for installing the back of SwitchBot Lock’s main unit stand.
- SwitchBot Lock does not affect the use of the door handle.
- Adjust the height of the SwitchBot Lock You can match the height of your thumbturn by adjusting the main unit stand.
- Open the battery case cover, use the cross-head screwdriver to unscrew the screws on the stand, and pull the stand outwards to change the height.
- Put the main unit stand next to your door, don’t remove the protective layer of the double-sided tape yet. For smooth operation, keep a 1 to 2 mm gap between the inside of the thumbturn adaptor and the thumbturn. The thumbturn adaptor should cover more than half the depth of the thumbturn.
- Hold SwitchBot Lock firmly, turn the thumb turn and check if you can lock and unlock your door smoothly.
- Once confirmed with the appropriate height of the stand, screw all the screws and close the battery case cover.
Install SwitchBot Lock on your door
Attention: Please make sure that your installation surface is free from
dirt and dust. This may affect the lock and increase the chance of falling
later.
- Remove the double-sided tape on the main unit stand, align the centre of the adaptor to the thumbturn’s axis and install it on the door as before.
- The axes of some adaptors may differ, please try to align them as precisely as you can.
- Push SwitchBot Lock’s main unit against the door for at least 2 minutes.
- After installing the main unit of SwitchBot Lock, you must remove the fixing tape on the side of the adaptor.
- Congratulations! You have completed SwitchBot Lock’s installation.
Step 3: Add Device and Calibrate
- Remove the battery insulation sheet. After SwitchBot Lock is powered on, the LED indicator light on the front will blink, meaning that the device is waiting to be paired.
- Open the SwitchBot app and tap the + icon on the top right corner of the homepage, choose the lock icon and add your device.
- Please follow the instructions on the app to complete adding the device.
LED Indicator Light
Please visit support.switch-bot.com for more details.
Battery Replacement
- When the battery level drops to lower than 20%, your device will notify you by flashing red and making a sound every time you lock/unlock the device.
- Please replace the 2 CR123A batteries by opening the main unit’s battery case cover as soon as possible.
Reset to Factory Settings
- If you will not be using SwitchBot Lock, please delete it on the SwitchBot app Lock Settings page. Once the device is deleted, all data stored on the device will reset to factory settings.
- Please be careful when doing so.
- Please visit support.switch-bot.com for more details.
Disclaimer
- This product is only used as a door-locking control device and cannot prevent theft completely.
- In the event of a burglary, our company assumes no responsibility or liability for any loss or damage suffered by any person as a result of using the product.
CE Warning
Manufacturer’s Name: Woan Technology (Shenzhen) Co., Ltd. This product is in a
fixed location. To comply with RF exposure requirements, a minimum separation
distance of 20 cm must be maintained between the user’s body and the device,
including the antenna. Use only the supplied or approved antenna. This device
in compliance with the essential requirements and other relevant provisions of
directive 2014/53/EU. All essential radio test suites have been carried out.
- CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS|
- The device complies with RF specifications when the device used at 20 cm from your body Importer Name: Amazon Services Europe Importer Address: 38 Avenue John F Kennedy, L-1855 Luxembourg, Art4-EURep@amazon.com.
FCC STATEMENT
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, according to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used following the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
FCC RF exposure statement
The equipment complies with the FCC Radiation exposure limit set forth for
uncontrolled environments. This equipment should be installed and operated
with a minimum distance of 20 cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>