SHPAVVER WD-1688 Electric Razor Instruction Manual

SHPAVVER WD-1688 Electric Razor Instruction Manual

NOTES

Warning Separate the handheld part from the power cord before cleaning the handheld part in water.

1. This product uses a TYPE-C charging
2. You can use the DC 5V/1A adapter mobile phone charger, or USB interface of cars,computers and others for charging
3. If the charging cable is damaged, replace it with a new one to avoid
4. The product shall be charged and stored between 5°C and 35°C.
5. Make sure the charge and charging cable are Do not plug or unplug with wet hands to prevent electric shock.
6. Please check if the foil is damaged or deformed before use to avoid damage to your
7. Clean the electric shaver with clean water, but do not soak it in water for a long
8. Do not use salt water, hot water above 60 C, thinners, gasoline, alcohol or other chemicals to clean the electric
9. It’s necessary to ensure to cover the electric shaver with the protective cover when you travel to protect its
10. Please do not charge the electric shaver too
11. Do not store the electric shaver in direct sunlight or near other sources of heat.

ACCESSORIES LIST

1. Product Body
2. 7D Integrated Disassembly Cutter Head
3. Nose Trimmer
4. Face Cleaning Brush
5. Facial Massager
6. Hair Trimmer Combs (3mm)(5mm)(7mm)
7. TYPE-C Cable
8. Cleaning Brush
9. Sideburns Trimmer
10. Product Manual

SPECIFICATIONS

CHARGING METHOD

1. When the remaining service time is less than 10 minutes, the indicator blinks, indicating that the battery is low and needs to be charged .

2. Plug the charging cable end into the electric shaver then connect the charging cable to the charger and plug it into the power socket, or plug the other end of the charging cable into a USB port of computers or cars.Charging

3. When the power is turned on, thedisplay will light up.with scrolling numbers which will increase as the charging time extends, indicating that it’s charging.2 hour

4. Full charging takes about 2 hour on a continuous basis After full charging, “FULL”and “–“(100 min) will be displayed indicating the shaver has

Tip: This iconindicatesbeen fully charged and can be used that it is fully charged. for about 90 minutes

SCREEN DISPLAY

Remaining Energy

The Screen display of this product can displayremaining energy. A fully charged electric shaver 2 hourcan provide a shaving duration up to about 100 minutes, but the actual shaving duration maybe less than expected due to differences in shaving habits, cleaning habits and beard types.The electric shaver can be used in the meanwhile it’s being charged by means of charging cable connection if it still has remaining energy.

Travel Lock Unlock

• Press and hold the electric shaver switch button for 3 seconds, and then the electric shaver LED display indicates that the safety lock has been
• Repeat the above step to unlock

Overload Protection Function

Overload protection is mainly for tool head Unloc blockage. When the electric shaver is overloaded it will automatically shut down and the display screen will show stall protection. At this time, it should be cleaned before use.

HOW TO USE

Shave Beard and Head

Press the switch button to turn on the electric shaver.

Move the electric shaver foil against the growth direction of your beard on your skin and make straight and reciprocated movements.

Hair on your neck can also be shaved.

Before shaving your head, clean it with warm water and keep your hair dry. For a better effect of use.please use the brush if you need to clean the shaving head during the head shaving process and wash the shaving head after shaving is completed.

WASH AND CLEAN WITH WATER

1. Before cleaning, be sure to separate the electric shaver from the charging cable and press the switch to the off
2. The cutter head of this product is an integrated magnetic suction cutter head, which can be disassembled as a whole by gently breaking off the cutter head by
3. The electric shaver can be washed directly under running But please do not soak it in water for a long time.
4. After washing, drain any excessive water, put it horizontally and air-dry Do not wipe the shaving head part with tissue or cloth, which may cause damage.
5. First air-dry the electric shaver, then cover it with the protective cover to prevent damage to the foil and avoid accumulation of

Replace Shaving Head

The shaving head should be replaced at least once every six months for a good experience. lf there is no damaged caused by human factors, the shaver can have a long service life. Any damaged shaving head can only be replaced with our original shaving head.

CUSTOMER SERVICE

Worry-free 1-year warranty and lifetime friendly customer service guaranteed! If you have any questions,please contact us via Amazon “Contact Seller” or email ([email protected]), we will be happy to serve you and guarantee 100% satisfactory treatment plan.Any problem?
Contact Us First!
Contact Seller [email protected]

Manufacturer

Company Name:Wenzhouwodunmaoyi.LTD. Address:29 Yangliu Road, Wenzhou Economic And
Technological Development Zone,Zhejiang Province, China Contact Person: Hailin Zhang
Email: [email protected]

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>