Spraying Systems 18250A TankJet Tank Cleaning Nozzle User Guide
- June 4, 2024
- Spraying Systems
Table of Contents
Spraying Systems 18250A TankJet Tank Cleaning Nozzle
GENERAL SAFETY INFORMATION
- Be cautious of any sharp threads
- Do not operate the nozzle (when it’s in the open) outside the container
- Do not attempt to touch the nozzle during operation rotation
- Handle all chemicals according to the corresponding MSDS
- WARNING: DO NOT USE TO SPRAY FLAMMABLE LIQUIDS –SUCH USE COULD RESULT IN FIRE OR EXPLOSION CAUSING BODILY INJURY OR DEATH
TECHNICAL SPECIFICATIONS
Specifications
Aplication:| Cleaning the inside of containers such as drums, barrels
and tanks
Features:| The nozzles will fit through the 2 7/23” (60 mm) diameter
hole. Reactionary force produced by the three flat sprays rotates the spray
head providing 360° coverage. The pres- sure to the nozzle controls the spray
head rotational speed
Temperature:| Maximum operating temperature is 360° F (170° C)
Pressure:| Maximum operating pressure is 100 psi (7 bar)
Material:| 316 stainless steel
Weight:| 1.5 lb. (0.68 kg.)
Parts List:| PL 18250A
INSTALLATION
- The 18250A nozzle can be installed in any orientation
- Use teflon tape when installing the 18250A
- Screw the nozzle onto a 3/4” NPT pipe to 150 in/lbs.
PARTS LIST
Item | Part No. | Description |
---|
1
| CP46951 – 316SS| Inlet cap, type 316 stainless steel for #18250A – 316SS
– 316SS
CP46951 – 316SS| Inlet cap, type 316 stainless steel for #B18250A – 316SS –
316SS
2
| ****
CP46939 – 316HSS
| Upper & lower race, type 316 stainless steel Kolsterized (2 req’d) for
18250A – 316SS _ – 316SS
3
| ****
46952
| Bearing retainer assembly: retainer, polyphenylene sulfide and 3/16“ ball, type 316 stainless steel Kolsterized (2 req’d)
for #18250A – 316SS _ – 316SS
4| CP46938 – 316SS| Body connector, type 316SS stainless steel
5| CP46936 – SSTEF| Sleeve, 50% stainless steel filled teflon
for #18250A – 316SS _ – 316SS
6| CP46937 – 316SS| Retainer, type 316SS stainless steel
7
| ****
CP18255 – 21 – SSPV
| Body & tip sub-assembly, type 316 stainless steel for #_18250A – 316SS21
– 316SS
CP18255 – 45 – SSPV
| Body & tip sub-assembly, type 316 stainless steel for #_18250A – 316SS45
– 316SS
EC DECLARATION OF INCORPORATION
Spraying Systems Co.®
North Avenue and Schmale Road, P.O. Box 7900,
Wheaton, IL 60187-7901
Tel: 1.800.95.SPRAY Intl. Tel: 1.630.665.5000
Fax: 1.888.95.SPRAY Intl. Fax: 1.630.260.0842
www.spray.com
in accordance with the following directive(s):
2006/42/EC The machinery directive
hereby declare that:
Equipment Tank Cleaning Devices
Model number 18250A, 21400A, 23240
is in conformity with the applicable requirements of the following
documents:
Ref. no. Title Edition/ Date
- EN ISO 4413 Hydraulic fluid power — General rules and safety requirements for systems and their components 2010
- EN 12100 Safety of machinery – General principles for design risk assessment and risk reduction 2010
- BS EN ISO 14121-1 Safety of machinery – Risk assessment Part 1: Principles 2007
- ASME- B31.1 ASME Code for Pressure Piping 2020
I hereby declare that the equipment named above has been designed to comply with the relevant sections of the above-referenced specifications. The unit complies with all applicable Essential Requirements of the Directives.
North Avenue and Schmale Road. P.O. Box 7900, Wheaton, IL 60187-7901 USA
Tel: 1.800.95.SPRAY Intl. Tel: 1.630.665.5000
Fax: 1.888.95.SPRAY Intl. Fax: 1.630.260.0842
Email: info@spray.com
www.spray.com
References
- Experts in Spray Technology | Spraying Systems Co.
- Experts in Spray Technology | Spraying Systems Co.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>