HOMCOM 440-032V00 2 in 1 Pushchairs and Strollers User Manual
- June 14, 2024
- HOMCOM
Table of Contents
HOMCOM 440-032V00 2 in 1 Pushchairs and Strollers
Product Information
- Product Name: Passeggino
- Model Number: IN220800533V02_ES_PT_IT
- Weight: 33 pounds
- Parts: – Front Wheel – Basket – Rear Wheel – Frame – Adjustable
footrest – Canopy – Back strap adjustment set
Product Usage Instructions
Assembly
To assemble the pushchair, follow these steps:
- Install the front wheel by inserting it into the slot.
- Make sure all parts are properly installed before use.
Opening the Pushchair
To open the pushchair, follow these steps:
- Swipe (1) and press the folding button (2).
- Lift and pull the handle up (3) while simultaneously opening the frame (4).
- Open the canopy (5).
Front Wheel Installation and Disassembly
To install the front wheel, insert it into the slot. To disassemble the front wheel, press the quick-release button.
Rear Wheel Installation and Disassembly
To install the rear wheel, insert it directly into the slot. To disassemble the rear wheel, pull the quick-release button and remove the wheel.
Cleaning and Maintenance
To clean and maintain the pushchair, follow these guidelines:
- Make sure all parts are properly installed before cleaning.
- Regularly lubricate all moving parts with silicone spray.
- Clean the plastic and fabric using warm water and a mild detergent. Use a soft, damp cloth for cleaning. Do not use abrasives or solvents.
Note: Failure to follow the instructions and warnings may result in serious injuries. Assembly should be completed by an adult. Make sure all locking devices are engaged before use.
IMPORTANT , RETAIN FOR FUTURE REFERENCE: READ CAREFULLY
AUTO FOLDING
PART
Operation Instructions
Open the pushchair:
-
Swipe (1) and press the folding button (2).
-
Lift and pull the handle up (3) – at the same time, open the frame (4).
-
Open the canopy (5).
-
Front wheel installation: Insert the front wheel into the slot.
-
Front-wheel disassembly: Press the quick release button to take off the front wheel.
-
As shown in the arrow, the front wheel quick-release button.
-
Rear wheel installation;
Insert the rear wheel directly into the slot. Disassembly of rear wheel: Pull the quick-release button, then remove the rear wheel. -
Quick release button of rear wheel as shown in the figure.
-
Bumper installation:
Insert the bumper into the designated groove. Disassembly of the front bumper: Press the quick-release button on both sides of the bumper at the same time (Fig. 1), then pull out the front handrail upward. -
As shown in Figure 1, the front bumper quick-re-move button is shown in Figure 1.
-
Press and hold the footrest button on the left and right sides to adjust the pedal up and down.
-
As shown in the figure, the pedal adjustment button
-
When the backrest is flat, hold the recliner lever with one hand, then pull up and down to adjust – the angle can be raised or lowered.
-
As shown in the figure, the backrest Angle adjustment buckle clip (1). Hold the backrest adjusting buckle clip with one hand, pull the backrest adjusting ribbon up and down to adjust, then the Angle of backrest can be raised or lowered.
-
Tighten the clasp upward to adjust the seat.
Do the opposite to return the backrest to its flat position. -
Fitting the safety harness
-
As shown in the picture, press the brake pedal toward the rear to lock the wheel. Press the brake pedal towards the front to unlock the wheel.
WARNING : The pushchair must be locked when stationary -
9.1. Folding the canopy (1).
-
Swipe the button (2), then press the folding button (3).
-
Remove your hand – the pushchair will fold automatically.
-
The pushchair becomes more compact (5) & (6).
-
Folding is complete (7).
CLEANING & MAINTENANCE/WARNING
Cleaning & maintenance:
- Ensure all parts are correctly installed before using.
- Regularly lubricate all moving parts with silicone spray.
- To clean the plastic and fabric, use lukewarm water with a mild detergent. Use a soft, damp cloth to wipe. Do not use abrasives or solvents.
WARNING:
Failure to follow warnings and instructions can result in serious injury.
- Adult assembly required. This pushchair contains small parts – keep small children away when assembling.
- Suitable for ages 0-36 months. Maximum load is 15kg (33lbs).
- Ensure all locking devices are locked before use. Check that pushchair or seat attachments are properly installed before use.
- Ensure a seatbelt is always worn, so they do not fall out of the pushchair. After fastening the buckles, adjust the belts so it comfortably fits around your child.
- Do not use the basket to carry children.
- Do not lift the pushchair by the front tray.
- When placing or removing a child from the pushchair, always use the brake.
- Never leave a child unattended in the pushchair.
- Do not use accessories, which have not been approved by the manufacturer.
- This product is not suitable for running, skating or similar activates.
In caso di dubbio, si prega di contattare il nostro centro assistenza client.
I nostri dettagli di contatto sono di seguito:
0039-0249471447
clienti@aosom.it
IMPORTATO DA:
AOSOM Italy srl
Centro Direzionale Milanofiori
Strada 1 Palazzo F1
20057 Assago (MI)
P.I.: 08567220960
FATTO IN CINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>