soundcore A3167 Flare Mini Speaker User Manual
- June 15, 2024
- Soundcore
Table of Contents
Soundcore Flare Mini
User Manual
Safety Instructions
- Avoid dropping.
- Do not disassemble.
- Soundcore Flare Mini can be immersed in water up to 1m for up to 30 minutes.
- Avoid extreme temperatures.
- Do not use the device outdoors during thunderstorms.
- Use original or certified cables.
- Do not use any corrosive cleaner/oil to clean.
- Do not expose batteries to high heat as direct sunlight, fire and Etc.
What’s Included
At a Glance
- Bluetooth Button
- Volume + and – Buttons
- Multi-function Button
- Light Effects Button
- Power Button
- micro USB Port
Using Your Soundcore Flare Mini
1. Turn On / Off
| ON | Press |
|---|---|
| OFF | Press and hold for 2 seconds |
a. Bluetooth mode
| Flashing Blue| Bluetooth Pairing Mode
---|---|---
| Solid Blue| Connected to a device
3s| Enter True Wireless Stereo| Stereo Pairing Mode / Disconnect True Wireless
| Slow Flashing White| True Wireless Stereo Pairing Mode
| Solid White| Connected to True Wireless Stereo
With True Wireless Stereo technology, you can pair your Soundcore Flare Mini with another Bluetooth speaker to explore the best sound effects with left and right sound channels separated on both speakers.
| × 1 | Play / Pause |
|---|---|
| × 2 | Play Next Song |
| × 3 | Play Previous Song |
| × 1 | Answer Call / End Call |
| > 2s | Reject Call / Switch between a call on hold and an active call |
| > 2s | End current call and answer incoming call / End current call and switch |
to call on hold
2s| Switch audio source between Speaker and Phone
2s| Activate Siri / Other Voice Control Software
| Volume Up / Down
| Solid White On a Call
| Flashing White Incoming Call
2s| Press and hold for 2 seconds to turn Light Effects Of
× 1| Press to turn Light Effects On
× 1| Press once to switch between Light Effect modes
When turned on, Soundcore Flare Mini will automatically connect to the last connected device if available. If not, press the Bluetooth pairing button to activate pairing mode.
To pair a different device, press the Bluetooth button to re-enter pairing mode. Then repeat the pairing steps.
Having connection problems? Remove Soundcore Flare Mini from your device’s Bluetooth history and ensure it’s less than 3 feet away. Then try pairing again. To get the best sound quality, make sure there is a clear line of sight between the connected device and your speaker.
Charging your Soundcore Flare Mini
| Slow Flashing Red | Low Battery |
|---|---|
| Solid Red | Charging |
| Off | Fully Charged |
Use the included USB cable to charge your Soundcore Flare Mini and EN T make
sure it is fully charged before its first use.
Disconnect your speaker from the charger when fully charged. Do not charge
your speaker for extended periods. When not in use, store your speaker in a
cool place.
Specifications
Specifications are subject to change without notice.
Input: 5 V⎓1 A
Audio output: 5 W x 2
Battery capacity: 2600 mAh
Charging time: 3.5 hours
Play time (varies by volume level and music content): 12 hours
Size: 141 x 86 x 72 mm
Weight (without packaging): 480 g / 16.9 oz
Bluetooth version: V4.2
Range: 20 m / 66 ft
Declaration of Conformity
Hereby, Anker Innovations Limited declares that the radio equipment type A3167 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.soundcore.com
Bluetooth Maximum output power: 2.0dBm
Frequency band: 2.4G band (2.4000GHz-2.4835GHz)
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Customer Service
24-month limited
warranty
Lifetime technical support
service@soundcore.com
+1 (800) 988 7973 (US) Mon-Fri 9:00 – 17:00 (PT)
+44 (0) 1604 936200 (UK) Mon-Fri 6:00 – 11:00 (GMT)
+49 (0) 69 9579 7960 (DE) Mon-Fri 6:00 – 11:00
+81 03 4455 7823 – 9:00 – 17:00
+86 400 0550 036 9:00 – 17:30
+82-2-6464-7088 9:00-17:30
For FAQs and more information, please visit:
Model No.: A3167
5100500XXXX V01