ENGLAON DVR-7W Wireless Monitor DVR with Reverse Camera Instruction Manual

ENGLAON DVR-7W Wireless Monitor DVR with Reverse Camera

Product Information

The product is a high precision device designed for specific
applications. It comes with various features and technical  specifications to provide optimal performance. The user manualcontains important instructions and precautions to ensure trouble-free service of the product. It is recommended to read the manual carefully before using the product.

The product is designed to be durable and reliable, but certain guidelines should be followed to maintain its longevity:

• Do not attempt to open the covers as it may damage the internal components.
• Avoid using organic solvent to clean the covers as it may cause peeling of the paint.
• Avoid applying excessive force to the lead wire to prevent damage or poor connection.
• Protect the product from falling down or experiencing shocks.
• Follow the wiring diagram strictly to ensure proper functioning and to prevent damage to the vehicle’s electrical system.
• Avoid using the product in a way that affects safe driving.
• Operate the product within the suitable temperature range specified by the manufacturer.
• Respect the copyright protection of the manual and understand that specifications may change without prior notice.

Product Usage Instructions

Bracket Installation

Plastic/Metal Bracket Installation:

1. Fix the bracket using screws, ensuring that the screws on top are locked to the nut underneath.
2. Place the metal buckle piece on the top of the fan-shaped bracket into the notch at the back of the monitor.
3. Adjust the bracket to the desired location.
4. Screw down the nut of the bracket until the monitor is securely fastened.

U-Bracket Installation:

1. Use screws to fix the U-bracket.
2. Insert the monitor into the bracket and adjust the angle as needed.
3. Lock the monitor in place.

Wiring Diagram

The wiring diagram provides instructions for connecting the monitor to various components:

• Reversing Display: Different camera views are automatically displayed based on the activation of specific wires connected to turn lights and backup lights.
• Four-way video inputs: The product supports four video inputs with corresponding trigger wires.
• Power: The product requires a DC power supply within the range of 12V to 32V.

Keystroke Instruction

The product includes a power switch, decrease and increase buttons, a menu/exit button, and an up/down enter key. These buttons are used to navigate and control the product’s settings and functions.

Remote Instruction

The product also comes with a remote control for convenient operation. Please refer to the remote control instructions provided separately for details on its usage.

Preface

To ensure long-term trouble-free service of the products, please read this manual carefully before using the product.
Notes:

1. Do not try to open the covers. It is a high precision product. Please close the power in time if anomalies.
2. Do not use organic solvent clear the covers, to avoid it peel off painting.
3. Do not enforce to the lead wire., to avoid damage or poor connect.
4. Protect the product from fall down and shock.
5. Please wiring as diagram strictly, if wiring wrong will lead product can’t work and even damage vehicle electrical system.
6. Do not use any affect operation of driving.
7. Do not let the product working at higher or lower than the suitable temperature of machine.

Copyright protection:

• This manual is the intellectual property of our company.
• In order to continuously improve the products,
• We reserve the right to change the specifications without prior notice.

Bracket Installation

Plastic/Metal Bracket Installation

1. Firstly fixed the bracket via the screws, the screws of the top need lock to nut of under.
2. Secondly put the metal buckle piece on the top of the fan-shaped bracket into the notch at the back of the monitor
3. Move the bracket to the proper location.
4. Screw down the nut of bracket, until the monitor fastening.

U-Bracket Installation (optional)

1. Use the screw fixed the U-bracket. Put the monitor into the bracket, adjust angle and locking it.
2. Finished the installation. Adjust the angle forward 30° to backward 30° . User can adjust a suitable angle by oneself.

Wiring Diagram

Reversing Display:

• When the green wire is activated, the monitor automatically switches to C.AM1
• When the white wire is connected to the positive wire of the left turn light , the monitor automatically switches to CAM2(left side camera) when the left turn indicator is activated.
• When the blue wire is connected to the positive wire of the right turn light, the monito automatically switches to CAM3 (right side camera) when the right turn indicator is activated.
• When the brown wire is connected to the positive wire of back-up light, the monitor automatically switches to CAM4 (back up camera) when the backup light is turned on. The distancing grid will also be displayed.
• When the yellow wire is connected to the positive wire, the monitor automatically switches to quad or split display. Connection depends on the application request.

Four way video inputs:

Keystroke Instruction

Remote Instruction

1. Power On Mode
2. Mode
3. Analog Increase
4. Volume Down
5. Volume Up
6. Analog Decrease
7. Menu
8. CH 1 (Video)
9. CH 2 (Video)
10. CH 3 (Video)
11. CH 4 (Video)

Features

1. TFT LCD monitor with wide ngle view and high resolution display
2. NORMAL, RROR IP and MIR FLIP viewing available.
3. Split mode uto scan mode and single display e available
4. Auto pairing: auto pairing happens when camera is activated.
5. Support 4channel omposite and single channel ecording in VI signal mat
6. Auto dim function available.
7. Full function remote control
8. 4 wireless camera nput.
9. Multiple video formats: PAL / NTSC.
10. Wide voltage input: 10 32V
11. On board speaker (Optional).
12. Auto switch to the orking channel when igger is activated

Technical Specifications

Menu

• COLOR SYS: Press or to select COLOR Press to enter, Press or to NTSC/PAL
• AUTO DIM: Press or to select AUTO DIM. Press to enter, and then press or to select ON/OFF. When it is on, the monitor will automatically turn darker when aced in dark environment or 5s.
• P -Line: press or to select ELETRONIC DISTANCE LABEL.to enter, and press or to select ON/OFF, to open or close the electronic distance label. When it is on the electronic distance label will be displayed in Back channel
• DELAYTIME: 1 20S, with the step time of 1s.

Display Mode

Menu

Cam-Setup

• Press or to select CAM SETUP, and press AV t.o select Press or to select CAM1/CAM2/CAM3/CAM4/SCANTIME, and the press AV to enter the setting accordingly. When the icons turn red, press or on menu for selection decreasing or adding. Press to exit the menu. At the submenu, press return to main menu.

If the channel is turned OFF, image of the corresponding camera will not be shown in AUTOSCAN display mode.
Setting scale of SCANTIME is 5 -45S, with the step time of 5s.

System

• Press or to select STEM,Press AV to enter

1. TIME： Press or to select TIME, Press AV to set. Press or for selection decreasing or adding. Press to continue the setting when ishing the previous operation.
2. LANGUAGE: Press or to select language, press AV to set. Chinese; English; French; German; Italian; Spanish; Portuguese; Russian; Korean; Finnish: Dutch

Troubleshooting

The symptoms described below do not necessarily mean a failure within the display. Please check the following items before you initiate request for repair.

No picture,

no sound

| Improper connection of automobile adapter.

Use of unauthorized power supply. Power switch is on OFF position.

Nosignal

| Check whether the camera has power supply. Pair the monitor and the camera again.
No sound| Check whether the sound volume is turned off or set too low.
Dark picture| Check whether brightness and contrast are a correctly.
No color| e HUE settings.

Menu

• MENU is allowed for operation under single image mode, not under quad view.
• Press to display the following options and settings:

1. Pairing
2. Picture
3. Mir-flip
4. Cam setup
5. System

Menu

Pairing

Press or to select PAIRING, then press AV to enter.

Auto pairing:

1. Choose the channel that needs to be set up, and the monitor display the message “PAIRING START 50” and a counter that counts down 50s.
2. Within the countdown, power the camera.
3. The monitor and cameras will synchronize themselves with each other after the camera is powered for 5s.

For successful auto pairing, the picture appears. If pairing is unsuccessful, the monitor displays the message “No Signal”. Repeat the pairing procedure.

Manually pairing:

1. Choose the channel that needs to be set up, and the monitor display the message “ pairing start 50”a nd a counter that counts down 50s.
2. Press the pairing button on the power-on camera.
3. The monitor and cameras will synchronize themselves with each other.

For successful auto pairing, the picture appears. If pairing is unsuccessful, the monitor displays the message “No Signal”. Repeat the pairing .procedure

Picture

Press or to select PICTURE,and press AV to enter the submenu .

Press Or to select BRIGHTNESS / CONTRACT / HUE / VOLUME,and then press to enter the setting accordingly. When the icons turn red, press or on menu for selection decreasing or adding. Press to exit the menu. At the submenu, press return to main menu.

MIR-FLIP

Press or to select MIRFLIP , and press to select

Press or to select NORMAL / MIRROR / MIRFLIP / FLIP . Press return to main menu

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>