cobieclick 2ARD4-BPECK Wireless Switch User Manual
- June 15, 2024
- cobieclick
Table of Contents
User Manual
About the Products
Product Introduction
Thank you for purchasing the Brandstand CubieClick®. This product offers an
easy way to wirelessly connect a switch (CubieClick) to an existing power
outlet or hardwired fixture. Please be sure to read this User Manual carefully
to ensure proper installation. CubieClick’s elegant design uses the kinetic
energy generated by pressing the switch to send a signal to the receiver for a
battery free, remote switch.
The information in this document is subject to change and does not represent a
commitment on the part of Brandstand. No part of this document may be
reproduced, transmitted in any form or by any means electronic or mechanical,
including photocopying, recording or information storage and retrieval
systems, or translated into any language for any purpose other than the
purchaser’s personal use, without the written permission of Brandstand.
Product Features
- Single button, one touch ON/OFF
- BLE Wireless Switch System, Does not require APP
- Simple installation, plug-in and wired-in receivers
- Detachable Wall Switch and Compact Receiver Kit (US, EU, UK versions available)
- Electromagnetic energy harvesting, No batteries required
- Switch may control a group of lights; remotely turn on/off indoor lighting fixtures, ceiling lights and fans, plug-in pendant, lamps, hard-to-reach lights, and other electric devices with a push of the wireless switch.
- Slim, stylish design
- Wireless Range-100ft
- Expandable system – add more wireless switches or more receivers
Product Description
- CubieClick Wireless Switch (sold separately)
- CubieClick Plug-In or In-Wall Receiver – US or UK or EU (all sold separately)
Technical Specifications
CubieClick Wireless Switch
Color: Black or White
Buttons: 1 Button – ON/OFF
Signal Range: Indoor range upto 100ft/30m
Frequency: BLE 2.4 GHz
Lifetime: 10,000 thousand clicks
Battery Type: No Battery
(Energy Harvesting)
Switch Dimensions 85.9mm X 85.9 X 17mm
EU Plug-In Receiver
Rated Voltage: 250V~
Rated Current: 16A
AC Frequency: 50/60Hz
Max Power: Up to 3680W/230V~
Resistive
Wireless Type: BLE
Operating Temp: -5°C ~ 35°C
Operating Humidity: ≤ 85% RH
US Plug-In Receiver
Rated Voltage: 120V~
Rated Current: 15A
AC Frequency: 50/60Hz
Max Power: Up to 1800W Resistive
Wireless Type: BLE
Operating Temp: -10°C ~ 40°C
Operating Humidity: ≤ 85% RH
UK Plug-In Receiver
Rated Voltage: 250V~
Rated Current: 13A
AC Frequency: 50/60Hz
Max Power: Up to 2990W(Resistive)
Wireless Type: BLE
Operating Temp: -5°C ~ 35°C
Operating Humidity: ≤ 85% RH
In-Wall Receiver
Product: 10A Wireless Receiver
Rated Voltage: 100V-240VAC
Rated Current: 10A
AC Frequency: 50/60Hz
Max Power: Up to 1200W US / 2400W UK, EU
Wireless Type: BLE
Operating Temp: -22°C ~ 55°C
Operating Humidity: ≤ 75% RH
Limited 1 Year Warranty
Products are warranted by Brandstand against manufacturing defect in material
and workmanship under normal use for one year from the date of purchase.
Defective products will be exchanged for the same or comparable item.
Return Policy
For a refund or exchange, products must be returned within 30 days of original
purchase date. Customers must contact Brandstand to obtain a Return
Merchandise Authorization (RMA) number and specific shipping instructions
prior to returning the product. Any product returned without a RMA will be
refused. Product must be in original box with original accessories and
packaging undamaged, clean and brand-new condition. Products that are
incomplete, damaged or have been used will require a deduction in refund.
There is a 30% restocking fee on all returned products. Refunds will be issued
by check. Refund checks are mailed the 10th day from the date the product is
returned. Delivery charges and customized products are non-returnable.
Disclaimer of Damages
In no event shall Brandstand Products, or its suppliers, be liable for
indirect, incidental, or consequential damages, loss of profit, loss of use or
data, or interruption of business, whether the alleged damages are labeled in
tort, contract, or indemnity, even if Brandstand Products or its suppliers has
been advised of the possibility of such damages. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above
limitation may not apply.
WIreless Switch Component List :
ITEM #:
BPECK • CubieClick Wireless Switch
• 2 Adhesive Pads
*Note: Screws Not Provided
Receivers Component List :
ITEM #:
BPECKPG • 1 US Plug-In Receiver
BPECKPGUK • 1 UK Plug-In Receiver
BPECKPGEU • 1 EU Plug-In Receiver
BPECKHW • 1 In-Wall Receiver
Plug-In Receiver Installation
Unpacking and Set up:
Carefully remove from packaging. Verify that you have all neces- sary
components before you dispose of box and packaging.
-
Plug CubieClick Plug-In Receiver into wall outlet.
Note: Plug receiver directly into a wall AC outlet.
Do not plug into a surge protector or extension cord -
Plug fixture into CubieClick Plug-In Receiver
Pairing:
(CubieClick pairs with thousands of unique addresses)
- Place CubieClick Wireless Switch in desired location.
- Press and hold the Plug-In Receiver button for 3 seconds, until light flashes.
- Press CubieClick Wireless Switch once.
(If it is not pressed, within 30 seconds, the receiver will quit pairing mode.)
When the connection is made, the receiver light will stop flashing.
Clearing (as needed):
Press and hold the receiver button for 10 seconds until there are 4 fast
flashes. This will clear all learned transmitters, the clearingis complete and
it is in a normal state
In-Wall Receiver Installation
Unpacking and Set up:
Carefully remove from packaging. Verify that you have all necessary components
before you dispose of box and packaging.
- Prepare the necessary equipment: meter, terminal block, wire cutter.
- Find the neutral wire and load wire of the fixture, use a meter to separate the neutral wire and the load wire and connect them as shown in the figure.
- Connect the load wire (red wire) corresponding to the wireless receiver to the load wire power input terminal, connect the OUT (brown wire) to the load wire power output terminal (fixture termi- nal) and connect the neutral wire (blue wire) to the neutral wire.
- Fixture ground should be connected to standard ground
Pairing:
(CubieClick pairs with thousands of unique addresses)
- Place CubieClick Wireless Switch in desired location.
- Press and hold the Plug-In Receiver button for 3 seconds, until light flashes.
- Press CubieClick Wireless Switch once.
(If it is not pressed, within 30 seconds, the receiver will quit pairing mode.)
When the connection is made, the receiver light will stop flashing.
Clearing (as needed) :
Press and hold the receiver button for 10 seconds until there are 4 fast
flashes. This will clear all learned transmitters, the clearing is complete
and it is in a normal state.
The receiver is wired between the power and the fixture (lamp).
The In-Wall Receiver can receive the BLE signal from CubieClick self-powered
wireless switch and provides a relay for the load output. CubieClick In-Wall
Receiver can pair with several wireless switches and the wireless switch can
pair with multiple receivers.
Attention: Receiver should not be fixed in a metal box with a metal cover plate (plastic cover acceptable). Signal performance may be compromised by metal barriers)
Wireless Switch Installation
Unpacking and Set up:
Carefully remove from packaging. Verify that you have all necessary components
before you dispose of box and packaging.
Standard Mount
(Adhesive strips work well mounted to hard surfaces)
- Remove one side adhesive and adhere to back of the wireless switch
- Remove to expose adhesive and apply to your selected surface
Alternate Mount with Fasteners
(May be preferred for fabric surface and added security)
- Gently pull the top button off from bottom
- Button will rotate and snap free
- Confirm placement and insert QTY 2 #6 drywall or wood-screws suitable for receiving material (flat or button head will work)
- Snap the cover back on in correct orientation (LED is up)
NO batteries needed EVER!
NO wi-fi connection
NO app required
Attach to wall with adhesive pads or screws
*Note: Screws Not Provided
Safety & Compliance
Important Safeguards
- Ensure the receiver unit is plugged into either a AC 120V-60Hz, or 250V-50Hz outlet. The use of incorrect outlets could cause the unit to malfunction or catch fire.
- To reduce the risk of fire or electrical shock, do not use this device with a receptacle in which the slot openings do not align with the blades.
- Do not allow children to operate the receiver unit without adult supervision (Operating the switch is child-friendly).
- Keep the product away from heated surfaces.
- The receiver unit should not be exposed to dripping or splashing and no objects filled with liquids, such as vases should be placed on or around the product. It should not be used with aquariums or other water-related products.
- Do not place or drop product into water or other liquids.
- Do not plug/unplug the product into/from the electrical outlet with a wet hand.
- Do not operate the product if it has a damaged, if wires are exposed, if it malfunctions, if it is dropped or damaged, or if it is dropped in or exposed to water.
- Place unit where there is good air circulation.
- The product has no user-serviceable parts. Do not attempt to examine or repair this product yourself. Only qualified service personnel should perform the servicing.
- No open flames sources, such as candles should be placed on the product.
- Product should only be used indoors and in dry locations.
FCC Warning –
This device complies with part 15 of the FCC Rules. Operations is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
includeign interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limitsare designed to provide reasonable protection against harmful
interference ina residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is ecouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to meet general RF exposure requirement. To maintain compliance with FCC’s RF exposure guidelines, the distance must be at least 20cm between the radiator and your body and fully supported by the operating and installation configurations of the transmitter and its antenna(s).
Environmental Protection
This device and its accessories (if included) should not be disposed of with
household garbage. Disposal of the devide and its accessories is subject to
local regulations. Support proper collection and recycling.
Disposal and recycling information
This symbol (with or without a solid bar) on the device, and /or the packaging, indicated that the device and its electrical accessories (for example, a cable) should not be disposed of as household garbage. these items should not be disposed of as unsorted municipal waste and should be taken to a certifed collection point for recycling or proper disposal. For more detailed information about device, contact your local city office, household waste disposal service, or retail store. Disposal of the device is subject to WEEE Directive Recast (Directive 2012/19/EU). The purpose of separating WEEE from other waste is to minimize the potential environmental impacts and human health risk of anyhazardous substances that may be present.
Reduction of hazardous substances
This device is compliant with the REACH Regulation (Regulation (EC) No
1907/2006] and RoHS Directive Recast (Directive 2011/65/EU).
The following mark is included in the product:
EU Regulatory Conformance Statement
Brandstand and its manufacturing partners, declare that this device is in
compliance with the essential requirements and other relevant provisions of
2014/53/EU.
This device may be operated in all member states of the EU. Observe national
and local regulations where the device is used. This device may be restricted
for use, depending on the local network.
Brandstand
1219 Digital Dr. Suite 100
Richardson, TX 75081, USA
877-843-3681
www.brandstand.com
© 2023 TXS Industrial Design Inc. d.b.a. Brandstand Products
CubieClick and Brandstand are registered trademarks of TXS Industrial Design,
Inc. in the United States.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>