SUPRO Keeley Custom 10 Full Tube Combo Amplifier for Electric Guitar User Manual
- June 4, 2024
- SuPRO
Table of Contents
SUPRO Keeley Custom 10 Full Tube Combo Amplifier for Electric Guitar User Manual
IMPORTANT SAFETY INFORMATION
The triangle surrounding an exclamation mark alerts users to the presence of important warnings or information.
The triangle surrounding a lightning bolt alerts users to the presence of dangerous high-voltage within the enclosure of the products that can pose a significant risk of electrical shock.
- Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturers instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the grounding-type plug. A grounding-type plug has two blades and a third grounding prong. The third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use the attachments/accessories specified by the manufacturer.
- Use only the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- To ensure proper ventilation always make sure there is at minimum four inches (101.6mm) of space behind the rear of the apparatus. The ventilation should not be impeded by covering the ventilation opening with items, such as newspapers, tablecloths, curtains, etc. Do not impede ventilation by placing objects on top of the apparatus which extend past the rear edge of its cabinet.
- Please contact Supro directly or a qualified person for tube replacement.
- The AC plug is the mains disconnect. The plug should remain accessible after installation.
- WARNING : To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
- WARNING : The apparatus shall not be exposed to dripping or splashing and objects filled with liquid, such as vases, shall not be placed on apparatus.
- CAUTION : To reduce the risk of fire or electric shock, do not remove the cover or back of the product. There are no user serviceable parts inside. Refer service to qualified personnel.
ANATOMY AND USAGE
2.1 FRONT PANEL
IN
Instrument input for the amplifier.
VOL
Controls the gain of the preamp section of the amplifier.
TREBLE
Controls the amount of treble frequencies.
BASS
Controls the amount of bass frequencies.
SEND
Effects loop output to your pedals.
RETURN
Effects loop input from your pedals.
STANDBY SWITCH
This turns on the high voltage to the tubes. The tubes should warm up for at least one minute before turning Standby switch to ON. Be sure that the Volume control is set to a reasonable position before switching the amplifier ON as this amplifier can be very loud! For short breaks (5 minutes or less), using the Standby switch will increase tube life.
PILOT LIGHT
This shows that AC Mains voltage is flowing to the amplifier.
POWER SWITCH
Turns on AC power to the amplifier. The Power switch should be turned on, and the pilot light should be lit for 1 minute before turning the Standby switch to ON.
2.2 REAR PANEL
SPEAKER OUTPUTS
The Keeley Custom 10 provides one 8 Ohm and two 4 Ohm speaker outputs. When using a single 8 Ohm speaker, such as the internal speaker, connect the speaker or cabinet to the 8 Ohm jack. If using two 8 Ohm speakers or cabinets, plug them both into the 4 Ohm jacks. (The logic here is that two 8 Ohm loads connected in parallel add up to a 4 Ohm total load.) When using the internal speaker with an extension cabinet, be sure to move the internal speaker to one of the 4 Ohm outputs.
INTERNAL SPEAKER ONLY CONFIGURATION:
INTERNAL SPEAKER WITH EXTENSION CABINET CONFIGURATION:
IEC POWER CORD RECEPTACLE / FUSE HOLDER
The power cord connects here and to your country’s appropriate wall outlet. Make sure to connect the male end of the IEC POWER CORD into a Grounded Power Outlet. This IEC connector contains the AC Mains fuse. This is a 20mm, T2.5A250V Fuse.
2.3 SETTING TONES
The preamp found in your Keeley Custom 10 is designed to provide a variety of sounds from clean to mean and everything between. Begin by setting the volume knob to 9:00. A good starting point is to set Bass, Treb, and Master controls to 12:00. Adjust the Bass and Treb controls accordingly to dial in the desired tone. With the master volume, you can dial in just the right amount of gain in the preamp, and control the overall volume with the Master.
The Effects Loop Send takes the signal directly from the preamp and sends it
to your pedals or other outboard gear.
The return jack accepts the signal from your pedals, and directs it to the
power section of the amplifier.
Supro amps are some of the most dynamically sensitive guitar amplifiers ever designed. The player is able to access myriad sounds within this amp by turning the amp volume up to the point of glorious overdrive and simply controlling the strength of the signal right from the volume knob on the guitar.
See tone maps at suprousa.com.
2.4 TUBES
Each Supro tube amplifier is a 100% analog, 100% tube amplifier. There are no solid state (transistor) devices in any audio signal path.
Viewed from the transformer side of the chassis:
2.5 TROUBLESHOOTING
Supro products have been designed for years of trouble-free service. There are many unique protection features to the design. If you are having difficulties, check the following:
No sound, but pilot light is ON
Check to see that the speaker is plugged into the speaker jack (not the footswitch jack). Make sure all knobs are turned up past zero and that the Standby switch is vset to operate. As this is a tube amplifier, the tubes take approximately 1 minute to warm up before you will get sound. The Standby switch should be set to standby for this warm up period.
No sound and the lights are all OFF
Unplug the power cord and check the 2.5A, 250V fuse (rear panel).
If you have any further questions, our email address is
support@suprousa.com.
SUPRO LIMITED WARRANTY
Your new Supro product is warranted to be free from defects in materials and
workmanship for 1 year from the original
date of purchase. If the product is registered at
http://suprousa.com/warranty, coverage is extended to two years.
Tubes and speakers are covered for 90 days. Warranty applies only to the
original retail purchaser of a registered
Supro product, subject to the limitations contained in this warranty.
THIS WARRANTY IS EXTENDED TO THE ORIGINAL RETAIL PURCHASER OF SUPRO PRODUCTS
BOUGHT ON OR
AFTER JANUARY 1, 2020 ONLY AND MAY NOT BE TRANSFERRED OR ASSIGNED TO
SUBSEQUENT OWNERS. IN
ORDER TO VALIDATE YOUR WARRANTY, AND AS A CONDITION PRECEDENT TO WARRANTY
COVERAGE HEREUNDER,
YOU MUST REGISTER YOUR PRODUCT WITHIN SIXTY (60) DAYS FOLLOWING THE ORIGINAL
DATE OF PURCHASE.
YOUR PROOF OF PURCHASE OR SALES RECEIPT MUST ACCOMPANY ALL REQUESTS FOR
WARRANTY COVERAGE—
YOU MAY SUBMIT YOUR RECEIPT ON THE REGISTRATION FORM. IF YOU DO NOT REGISTER
THE PRODUCT WITHIN
60 DAYS OF PURCHASE, YOUR PRODUCT WILL NOT BE SERVICED UNDER WARRANTY.
If your Supro product is destroyed, lost or damaged beyond repair while in the
possession of Supro for repair, Supro will replace that product with one of
the same or most similar style of a value not in excess of the original
purchase price of your product. Any insurance covering the product, including
but not limited to collector’s value insurance, must be carried by you at your
expense.
This warranty covers the cost of both labor and materials on repairs deemed
necessary by our Customer Service Representative which includes:
- Amplifiers: 1 year (Extended to 2 if registered)
- Speaker Cabinets: 1 year (Extended to 2 if registered)
- Tubes and speakers: 90 days
- Effects Pedals: 1 year (Extended to 2 if registered)
THIS WARRANTY DOES NOT COVER:
- Any product that has been altered or modified in any way or upon which the serial number has been tampered with or altered.
- Any product whose warranty has been altered or upon which false information has been given.
- Any product that has been damaged due to misuse, negligence, accident, or improper operation.
- The subjective issue of tonal characteristics.
- Shipping damages of any kind.
- Any product that has been subjected to extremes of humidity or temperature
- Normal wear and tear
- Any product that has been purchased from an unauthorized dealer, or upon which unauthorized repair or service has been performed.
SUPRO MAKES NO OTHER EXPRESS WARRANTY OF ANY KIND WHATSOEVER. ALL IMPLIED, WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, EXCEEDING THE SPECIFIC PROVISIONS OF THIS WARRANTY ARE HEREBY DISCLAIMED AND EXCLUDED FROM THIS WARRANTY. SOME STATES AND/OR COUNTRIES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF IMPLIED WARRANTIES SO THAT THE ABOVE MAY NOT APPLY TO YOU. SUPRO SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT CONSEQUENTIAL, INCIDENTAL OR OTHER SIMILAR DAMAGES SUFFERED BY THE PURCHASER OR ANY THIRD PARTY, INCLUDING, WITHOUT LIMITATION. DAMAGES FOR LOSS OF PROFITS OR BUSINESS OR DAMAGES RESULTING FROM USE OR PERFORMANCE OF THE PRODUCT, WHETHER IN CONTRACT OR IN TORT, EVEN IF SUPRO OR ITS AUTHORIZED REPRESENTATIVE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND SUPRO SHALL NOT BE LIABLE FOR ANY EXPENSES, CLAIMS, OR SUITS ARISING OUT OF OR RELATING TO ANY OF THE FOREGOING.
Steps To File for Warranty Coverage:
Register your new product at http://suprousa.com/warranty
Complete the warranty request form available at http://suprousa.com/support
and we will handle it from there!
Manufacturer:
DAG Audio LLC, 141 West 28th St. 4th Floor,
New York, NY 10001
Commercial Importer, EU:
BOND AUDIO GmbH & Co. KG., Lichtstrasse 25,
50825 Cologne, Germany
suprousa.com
All Contents © Bond Audio LLC 2021
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>