BRAINZ 38594 Disk Speaker Instruction Manual
- June 14, 2024
- BRAINZ
Table of Contents
BRAINZ 38594 Disk Speaker Instruction Manual
PLEASE READ THE INSTRUCTIONS CAREFULLY AND KEEP THEM FOR FUTURE REFERENCE
What you need
- USB-C Cable (included)
- USB Cable (optional, not included)
- Mobile phone, tablet, or laptop with Bluetooth (not included)
Charging the Disk Speaker
Insert the included USB-C cable into the bottom of the disk speaker and
connect the USB end to a power source.
When you do this, your product will begin to charge.
Setting up the device
Hold down the button at the top of the speaker with the power symbol for 3
seconds to turn on the speaker. The speaker will appear among your new
Bluetooth connections on your phone as BRAINZ S105. By clicking on it, your
phone will establish a connection, and the speaker is ready for use.
Volume
To adjust the volume higher or lower, you can use the dial knob located on the
top of the Disk speaker.
Next/previous song
Press the + button once to skip to the next track. Press the – button once to
go to the previous track.
USB
You can play your own music via the USB port. Insert a USB stick into the
designated access port on the Disk speaker.
Mode
Press the ‘M’ button to switch the Disk speaker from Bluetooth mode to USB
mode.
Turning Off
Hold down the button at the top of the speaker with the power symbol for 3
seconds to turn off the speaker.
Note
Do not use a charger with a higher voltage than what is suitable for this
product.
This manual is valid for article number 38594.
For more information about this product, please visit www.brainz-
electronics.nl
