ENGLAON DVR-7C1 AND Monitor DVR with Reverse Cameras Instruction Manual

AHD Monito DVR with
Reverse Cameras
Operation Manual
DVR-7C1

Warranty

Thanks for use our products, we will offer the below service: 12 months warranty after leave from factory.
While below status, we will charge maintenance cost:

1. Can’t offer purchase invoice;
2. Invoice was changed by buyer;
3. Accident or human damage;
4. Leader wire was cut down;
5. Product was opened without discuss with us;
6. More than warranty period.

Specifications and manual content are subject to change without any notice.

Preface

Thanks for your support. Our company stick the management philosophy of “Quality First, Honest Based!” , and based on meeting customer’s requirement and supplying high quality products, perfect after-sales service as our purpose, be absorbed in offer the best products.
To ensure long-term trouble-free service of the products, please read this manual carefully before using the product.

Notes:

1. Do not try to open the covers. It is a high precision product. Please close the power in time if anomalies.
2. Do not use organic solvent clear the covers, to avoid it peel off painting.
3. Do not enforce to the lead wire., to avoid damage or poor connect.
4. Keep the product out of the dirty, direct sun, high temperature and humidity condition.
5. Protect the product from fall down and shock.
6. Please wiring as diagram strictly, if wiring wrong will lead product can’t work and even damage vehicle electrical system.
7. Do not use any affect operation of driving.
8. Do not let the product working at higher or lower than the suitable temperature of machine.

**** For the sake of safety, please do not watch the video while driving, except driving assist video!

Monitor Specifications

Separately adjust camera mirror/ normal image: Multi-language:
English/Deutsch/Francais/Espanol/ PortugaVItaliano/Chinese
Video Inputs| 3 way video inputs, 3 way trigger wires
Brightness| 450cd/ni
Contrast| 500:1
Voltage| DC I2V–36V
Features| With reverse polarity protection;
Separately supply DC 12V power to each camera: AV I/AV2/AV3 with trigger wires;
With light sensor;
With removable sunshade;
Camera type| Allow AHD 720P/960P/1080P/CCD/CMOS
Operation Mode| 6# Remote control/Keystroke
Dimensions| 51NCH: (L) 132x(W)95x(T)25MM
71NCH: (L)1774W)122x(T)26MM
91NCH: (L)228x(W)154x(7)26MM
10.1INCH: (L)352x(W)166x(T)32MM
71NCH: (L)186x(W)140x(7)33MM (IP69K)
10.1INCH: (L)263x(W)185x(T)34MM (IP69K)

Menu Operation Instruction

Press “MENU” , the screen will show OSD menu.
Press “▼▲”, to select other feature. Press“ ◄► ” to adjust parameter.
Press “MENU” over and over again, the screen will show pictures as below:

0~100
0~100
0~100
On/Off

Reversing guide line ON/OFF
Delay time 0~15S
Delay time 0~15S
Delay time 0~15S
Delay time 0~15S

Warm Tips:
When Guide Line is set as ON at the current channel, and the current channel is triggered by the corresponding trigger wire, then the guide line will be displayed ON the screen.

Multiple languages
Picture flip
Mirror/Normal
Mirror/Normal
Mirror/Normal

Volume adjust 0~100

Keystroke Instruction

1. ; Power
2. V1/V2; AV; SEL
3. CH
4. LR
5. M; MENU
6. -; ▼
7.+; ▲
8.
9.
10. | 1. Power On
2. Video Switch
3. Guide Lines
4. Image Normal/Mirror
5. MENU
6. Analog Decrease
7. Analog Increase
8. IR Receiver
9. Light Sensor
10. Inaction
---|---

Remote Instruction

1. Power on/off
2. Video switchover
3. ◄ Analog decrease| 4. ► Analog increase
5. Mode
6. Menu
7. Insulation sheet
---|---

Wiring Diagram

14Pin Aviation Connector (coaxial)

Extension Cable

Bracket Installation

Bracket optional: Headrest Frame; Metal; U-Bracket

1. Plastic/Metal Bracket Installation

1. Firstly fixed the bracket via the screws, the screws of the top need lock to nut of under.
2. Secondly put the metal buckle piece on the top of the fan-shaped bracket into the notch at the back of the monitor.
3. Move the bracket to the proper location.
4. Screw down the nut of bracket, until the monitor fastening.
   

2. U-Bracket Installation (optional)

1. Use the screw fixed the U-bracket. Put the monitor into the bracket, adjust angle and locking it.
   2) U-Bracket Installation (optional) 1) Use the screw fixed the U-bracket. Put the monitor into the bracket, adjust angle and locking it.
   

System

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>