NADAMOO N-3600 Wireless Barcode Scanner Quick Start Guide

NADAMOO N-3600 Wireless Barcode Scanner

Package Include

• 1x Handheld barcode scanner
• 1x USB receiver
• 1x USB Cable

Decoder parameters

• Working current: 3.5 V ± 10% x 100mA
• Light source: 632nm Visible red light
• Sensor: Linear CCD Sensor
• Resolution: 2500
• CPU: ARM 32-bit Cortex
• Decoding speed: 300/sec
• Decoding accuracy: ≥3.3mil@PCS90% CODE39
• Trigger Mode: Button, Continuous scanning, Auto-Induction
• Printing Contrast: ≥30%
• Depth of Field: 30-500mm
• Scanning angle: Rotation 30°, Inclination 60°, Declination 60°
• Decode Capability: EAN-8, EAN-13, Codabar, CODE11, CODE39, CODE93, CODE128, China Post, GS1-128, GS1-Limited, GS1-Omnidirectional, UPC-A, UPC-E, Interleaved 2 of 5, Matrix 2 of 5, Industrial 2 of 5, ISBN/ISSN, ISBT, MSI, Plessey, ITF14, etc.
• Read linear barcode on paper and screen.
• Button life: 1,000,000 times
• LED life: 100,000 hours
• Upload mode: Instant upload mode, Storage mode
• Storage: 512KB = 5000 EAN13 barcodes
• Working time: Full load ≈18 hours, Normal use ≈3 to 10 days
• Compatible system: Windows series, Mac, Android, iOS
• Connection: Bluetooth connection, Wired connection
• Wireless type: Bluetooth
• Distance: ≤10m/33ft

Shape description

Dimensions: 120X48x23mm

• Charge LED：
  During charging, the green light is on. When the green light is off, the charging is completed

• Decoder LED：
  Press button to start the scanner, the green light is on. When the reading is successful, the green light flashes once.

• Bluetooth LED:
  When the scanner is set into pairing mode,the blue light will flashing. When bluetooth connection is successful,the blue light will stop flashing.

Connection Mode Setting

Wired Mode:

1. Connect the scanner to your computer Via USB cable
2. Press the scanner’s blue button to start the scanner.
3. Scan the following code to convert the scanner to wired mode.
4. Run Microsoft Word or notepad on computer,put the cursor in the field. when barcode is scaned, the scanner inputs the barcode into the location of the cursor.

Bluetooth Mode

Note:

1. Be sure the scanner is set to Bluetooth Mode.
2. The Scanner name：” General Bluetooth HID Barcode”.
3. when you need to switch devices, you have to delete the pairing and re-establish connection between the scanner and the device.

Pairing with Android IOS device

• Press the button, the buzzer sounds twice, the green light is on and the scanner starts.
• Read “Bluetooth mode” barcode to convert scanner to bluetooth mode
• Read “Match” barcode, blue light flashing which means in matching mode.
• Turn on the Bluetooth in Android / IOS device, search for “General Bluetooth HID Barcode”
• Click “General Bluetooth HID Barcode” in available device, when the connection is successful, the blue light is a normally on and the buzzer drops twice.

Pairing with Windows 8/10

• Insert the Bluetooth USB receiver, the computer will automatically install the drive.
• Press the button, the buzzer sounds twice, the green light is on and the scanner starts.
• Read “Bluetooth mode” barcode to convert scanner to bluetooth mode
• Read “Match” barcode, blue light flashing which means in matching mode.
• Open the Control Panel, click on the “Add a device”, the computer will search “General Bluetooth HID Barcode”
• Click the device and click “Next”, the computer will automatically install the driver ,When the connection is successful, the blue light is a normally on and the buzzer drops twice.

Pairing with Windows 7

• Insert the Bluetooth USB receiver, the computer will automatically install the drive.
• Press the button, the buzzer sounds twice, the green light is on and the scanner starts.
• Read “Bluetooth mode” barcode to convert scanner to bluetooth mode
• Read “Match” barcode, blue light flashing which means in matching mode.
• Open the Control Panel, click on the “Add a device”, the computer will search “General Bluetooth HID Barcode”
• Double-click the device, the computer will automatically install the driver ,When the connection is successful, the blue light is a normally on and the buzzer drops twice.

Pairing with Windows XP

• Insert the Bluetooth receiver, the computer will automatically install the drive.
• Press the button, the buzzer sounds twice, the green light is on and the scanner starts.
• Open the Control Panel, click “Bluetooth device”→ click the Add button, Then, Select “My device is set up and ready, you can find”, click Next.
• Read “Bluetooth mode” barcode to convert scanner to bluetooth mode
• Read “Match” barcode, blue light flashing which means in matching mode.
• the computer will search “General Bluetooth HID Barcode”
• Double-click the device, The dialog box appears, choose not to use keys, click” Next”, the computer will install the driver ,When the connection is successful, the blue light is a normally on and the buzzer drops twice.

Setting

Upload Mode Setting

Under Bluetooth mode,there are two upload mode：

• Instant upload mode: Scanning barcode and real-time upload the barcode.

To set the scanner to instant upload mode,please scan the following barcode

Storage mode: Under storage mode, all scanned data will be stored directly into the  uffer memory of the scanner. Internal storage supports up to 5000 barcodes .You could upload the data to computer when you need it.

An operation in storage mode is strongly recommended under the following scenarios:

1. During the scanning process, the device often leaves the Bluetooth signal range;
2. Due to a high quantity of blocking objects, the Bluetooth signal’s stability can’t be ensured.

• To set the scanner to storage mode ,please scan the following barcode
• Scan the following barcode to upload the stored data
• Scan the following barcode to show total number of stored barcode
• Scan the following barcode to clear all the stored barcode

Scanning Mode setting

1. Key trigger mode: Red light is on when pressing the button
2. Continuous scanning mode: Red light always on when the scanner is electrified. The scanner reads barcode without pressing any buttons.
3. Auto-induction mode: Red light is on when a barcode appear in front of the scanning window and then the goes out after the barcode is read

• Scan the following barcode to set the scanner to key trigger mode
• Scan the following barcode to set the scanner to continuous mode
• Scan the following codes orderly to set the scanner to Auto induction mode
• Scan the following code to turn off Auto-induction mode

Profile Setting

HID profile (frequently-used)

• In the HID protocol, there are 2 entities: the “host” and the “device”.
• The host communicates with the device and receives input data from the device on actions performed by the human.
• The most common example of a “host” is a PC but some cell phones also can be hosts.
• The “device” is the entity that directly interacts with a human, such as a keyboard or mouse.
• If you want to set the scanner as a device to enter the barcode,please read code “HID-mode: USB Keyboard”

Scan one of the code to select transmission speed

Spp Profile (Rarely used)

SPP defines how to set up virtual serial ports and connect two Bluetooth enabled devices.

Usage Scenarios: A scenario would be using two devices, such as PCs or laptops, as virtual serial ports and then connecting the two devices via Bluetooth technology.

Terminator setting

• To add Tab after barcode , Please scan the code “Tab”
  To add CR (ENTER) after barcode , Please scan the code “CR ”

• To set no-termination,please scan the code “None”

Character Setting

Insert Custom prefix

1. First step,scan the following code “Enter custom prefix setting”

2. Second step: scan the needed character code (char-table is on page 19-25)
   E.g. To add prefix ”VC”,scan the corresponding character code 1086 ,1067 in order.

3. Third step : scan the following code“ Exit custom prefix setting” After that, when you scan a barcode X001E52257, “VCX001E52257” will show.

Clear all prefix

• Scan the “ Clear All Prefix” barcode to clear all prefix characters.

Insert Custom Suffix

• First step,scan the following code “Enter custom suffix setting”

• Second step: scan the needed character code (char-table is on page 19-25)
  E.g. To add prefix ”VC”,scan the corresponding character code 1086 ,1067 in order.

• Third step: scan the following code“ Exit custom prefix setting” After that, when you scan a barcode X001E52257, “X001E52257VC” will show.

Clear all suffix

• Scan the “Clear All suffix” barcode to clear all suffix characters. Note: “Clear All suffix” does not clear the terminator.

hide prefix character

• Scan one of the following bar codes to hide the corresponding prefix characters.

E.g. For barcode 123456, if you set the scaner to hide 1 prefix character. The data received by the host is “23456”

Unhide prefix character

• Scan the barcode below to unhide prefix characters.

hide suffix character

• Scan one of the following bar codes to hide the corresponding suffix characters.
  E.g. For barcode 123456, if you set the scaner to hide 1 suffix character. The data received by the host is “12345”

Unhide suffix character

• Scan the barcode below to unhide suffix characters.

hide intermediate character

• First step, scan one of the following barcode to set the scanner to hide character from the First M-bit character

Second step, scan one of the following bar codes to set the scanenr to hideN- bit characters.

E.g. For barcode 123456789, If you want to set the scanner to hide the “56” character First,scan the programming code “hide from the fourth character” Second,scan the programming code “Hide two character” After that, the data received by the host is “1234789”

Unhide the intermediate character

• Scan the barcode below to unhide the intermediate character

keyboard Setting

• Scan the following code to Active or Hide the Input Method (only use for ipad / iphone,if you need to setup the input method of the Android device,please contact us at nadamoo@126.com)

double click Power key quickly, it will active the soft keypad. double click Power key quickly again, the soft keypad will hide.

Language settings

Scan one of the following codes to set the language

Voice Settings

Scan one of the following codes to set the voice

Sleep Time Setting

The scanner will start sleep mode if there is no operation on it over
30s. Short press on the trigger can wake it up.

Here is the steps to change the sleeping time：

• First: scan code”into sleep time setting”.
• Second: Scan one of the following barcode to set the time interval, when it’s idle exceeding the time interval you set,the scanner will power off.

Shutdown Setting

• Scan the code “Shutdown”,the scanner will emits a beeping sound and then shutdown immediately

Restore Factory Setting

• If you do not need the previously configured functions,scan the code”Restore defaults”to restore the scanner

Buzzer & FAQ

Buzzer：

• Long beeps once： Bluetooth disconnected
• Long beeps twice： Bluetooth module failure
• Long beeps 3 times： Low battery,Please charge
• Short beeps once： upload OK,Settings OK
• Short beeps twice： connection succeeded
• Short beeps 3 times： upload failed
• Short beeps 5 times： Setting error, matching error

FAQ:

Can’t search the scanner

1. Make sure the scanner is in HID-mode
2. Whether the scanner in matching state- blue light flashing

Scanner connected but barcode is not upload

1. Whether the scanner set to storage mode, Please set it to Instant upload Mode
2. Whether the scanner set to SPP-mode, Please set it to HID-mode

Character table

FREQUENTLY ASKED QUESTIONS

What is the NADAMOO N-3600 Wireless Barcode Scanner?

The NADAMOO N-3600 Wireless Barcode Scanner is a handheld scanning device designed for wireless barcode capture and decoding for a wide range of applications.

How does the NADAMOO N-3600 Barcode Scanner work?

The NADAMOO N-3600 Barcode Scanner uses a built-in camera or laser to scan and interpret barcode data, which can be transmitted wirelessly to connected devices such as computers or smartphones.

What types of barcodes can the NADAMOO N-3600 Scanner read?

The NADAMOO N-3600 Scanner is typically capable of reading various barcode types, including 1D and 2D barcodes such as QR codes, UPC, EAN, and more.

Is the NADAMOO N-3600 Scanner suitable for retail applications?

Yes, the NADAMOO N-3600 Scanner is commonly used in retail environments for tasks like inventory management, product pricing, and point-of-sale operations.

Can the NADAMOO N-3600 Scanner be used in warehouse and logistics?

The NADAMOO N-3600 Scanner is well-suited for warehouse and logistics applications, including inventory tracking, package management, and order fulfillment.

Does the NADAMOO N-3600 Scanner support wireless connectivity?

Yes, the NADAMOO N-3600 Scanner is equipped with wireless connectivity options such as Bluetooth or Wi-Fi, allowing for data transmission and integration with other devices.

Is the NADAMOO N-3600 Scanner designed to be rugged and durable?

The NADAMOO N-3600 Scanner is often designed to be durable and rugged, with features like drop resistance and protection against dust and water, making it suitable for challenging environments.

What is the operating system on the NADAMOO N-3600 Scanner?

The NADAMOO N-3600 Scanner typically does not run on an operating system but connects wirelessly to other devices like computers and smartphones for data processing.

Can the NADAMOO N-3600 Scanner be used for asset tracking?

Yes, the NADAMOO N-3600 Scanner can be used for asset tracking and management, facilitating the monitoring of valuable assets within an organization.

Is technical support available for the NADAMOO N-3600 Scanner?

Many manufacturers offer technical support and customer assistance for the NADAMOO N-3600 Scanner to address setup, usage, and troubleshooting questions.

Can the NADAMOO N-3600 Scanner be integrated with inventory management software?

Yes, the NADAMOO N-3600 Scanner can typically be integrated with inventory management software and other business systems to streamline data synchronization and processing.

What is the battery life of the NADAMOO N-3600 Scanner?

The battery life of the NADAMOO N-3600 Scanner may vary by model, but it is usually designed to provide extended use on a single charge.

Can the NADAMOO N-3600 Scanner be used for mobile data collection?

Yes, the NADAMOO N-3600 Scanner is suitable for mobile data collection tasks, such as surveys, field inspections, and data capture on the go.

What is the warranty for the NADAMOO N-3600 Scanner?

The warrantie typically range from 1 year to 2 years.

Is the NADAMOO N-3600 Scanner user-friendly?

The NADAMOO N-3600 Scanner is designed to be user-friendly, with an intuitive interface and straightforward scanning capabilities.

Can the NADAMOO N-3600 Scanner be used in healthcare applications?

Yes, the NADAMOO N-3600 Scanner can be utilized in healthcare settings for tasks like patient identification and medication verification.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK:NADAMOO N-3600 Wireless Barcode Scanner Quick Start Guide

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>