MACROM M-AN6560D Android Multimedia Monitor User Manual

MACROM M-AN6560D Android Multimedia Monitor

Product Information

Product Name: Android Multimedia Monitor
Model: M-AN6560D

Safety Precautions

• Do not change the fuse on the power cord without professional guidance, as using an improper fuse may cause damage to the unit or even fire.
• Only connect the unit to a 12-volt power supply with negative grounding.
• Contact your nearest dealer if you are experiencing any of the following symptoms: water or other objects entering the unit, smoke, or peculiar smell.
• Never install this unit where safe driving conditions are impaired.
• Do not use the video display function in the front while driving, except for using the rear-view video camera.
• Adjust the volume to a safe and comfortable level for emergency situations.
• Avoid exposing the unit, amplifier, and speakers to moisture or water to prevent electric sparks or fire.

Product Usage Instructions

1. Never disassemble or adjust the unit without professional guidance. Consult a professional car shop or dealer for any inquiries.
2. Clean the front panel or TFT monitor using a clean silicone cloth and neutral detergent. Avoid using a rough cloth or non-neutral detergent such as alcohol, as it may scratch or decolorize the monitor.
3. If any abnormal behavior is observed, refer to the troubleshooting guide in the manual. If no relevant information is found, press the [RESET] key on the front panel to restore factory defaults.
4. If the car has been parked in hot or cold weather for a long time, wait until the temperature inside the car becomes normal before operating the unit.
5. Avoid using the unit in low-temperature environments with the car heater on, as it may result in moisture inside the unit. If moisture is present, eject the disc and wipe off the moisture. If the unit still doesn’t work after a few hours, contact the service center.
6. Avoid impacting the LCD monitor to prevent damage.
7. Avoid touching the screen with sharp objects to prevent damage.
8. Some graphic illustrations in the manual may differ from the actual images displayed on the screen.
9. Operate the unit correctly according to the manual to prevent unnecessary problems. The guarantee won’t be valid if the problem is caused by inappropriate operation.

Warning
Detect parking brake

Important Note
This connection is indispensable for proper operation. Connect to the parking cable, brake light, and battery as instructed.

Product Overview
The multimedia unit can be accessed through the home page, where various functions are available. To power on the unit, press the front panel when it is connected to the vehicle ignition system. To power off the unit, remove the car ignition key.

Safety Precautions

Thank you for purchasing this product. Please read through these operating instructions so you will know how to operate your model properly. After reading the instructions, keep this manual in a safe place for future reference.

• Only connect the unit to a 12-volt power supply with negative grounding.
• Never install this unit where the operation & condition for safe driving is impaired.
• Never use the video display function in the front when driving to prevent the violation of laws & regulations and also to reduce the risk of traffic accidents except for using a rearview video camera.
• Never expose this unit, amplifier, and speakers to moisture or water to prevent electric sparks or fire
• Please don’t change the fuse on the power cord without professional guidance, using improper fuse may cause damage to this unit or even cause fire.
• Please contact your nearest dealer if one of the following symptoms is experienced:
  • (a). Water or other objects enter the unit.
  • (b). There is smoke.
  • (c). Peculiar smell.

To ensure safe driving, please adjust the volume to a safe and comfortable level in case of emergency situations

Safety Precautions

1. Never disassemble or adjust the unit without any professional guidance.
   For details, please consult any professional car shop/dealer for inquiries.

2. If the front panel or TFT monitor is dirty, please use a clean silicone cloth and neutral detergent to wipe off the spot. Using a rough cloth and non-neutral detergent such as alcohol for cleaning may result in scratching or decoloration to the monitor.

3.  If any abnormal behavior of the unit is found, please refer to trouble troubleshooting guide of this manual. If no relevant information is found, please press the [RESET] key on the front panel to resume factory default.

4. If you have parked the car in hot or cold weather for a long time, please wait until the temperature in the car becomes normal before operating the unit.

5. Using the car heater in low low-temperature environment may result in moisture inside the unit, DO NOT use the unit in this situation. Eject the disc and wipe off the moisture on the disc. If the unit still doesn’t work after a few hours, please contact the service center.

6. Do not impact the LCD monitor which could cause damage.

7. To prevent damage to the screen, avoid touching it with sharp objects.

8. To provide a clear demonstration and an alternative for easy understanding to the operation of this unit, graphic illustrations are used.
   However, some illustrations are different from the actual images displayed on the screen.

9. Operate the unit correctly according to this manual to prevent unnecessary problems. The guarantee won’t be valid if the problem is caused by inappropriate operation.

Warning
Detect parking brake

• In order to be able to install the Android application, the handbrake connection must be connected. Engage the parking brake for APP installation.
• Connect the cable “BRAKE” to the parking brake switch to view video files on the TFT monitor. Engage the parking brake for viewing videos.
• When the parking brake is not engaged, the monitor displays “Warning!!!, Video playback is disabled for your safety. Engage parking brake to watch video.”, preventing the driver to watch content while driving. The rear screens are not interested in this inhibition.

Importante note: This connection is indispensable for the proper operation.

Product Overview

Through the home page, you can access the functions of the multimedia unit.

Power On / Off the unit
When the unit is connected to the vehicle ignition system, press the front panel to turn on the unit. To turn off the unit, remove the car ignition key.

1. Screen
   Press the icon to turn off the screen. Touch the screen in any position to activate the view.

2. Navigation
   Press the icon to go directly to the navigation function.

3. Audio control
   Use the audio icon to adjust the sound system.

4. Brightness
   Press the icon to access the screen brightness settings.

5. Interface colors
   Allows access to the color settings of the user interface.

6. Source Selection
   Press the app to view Radio, Music, Video, USB Playback, or AVIN mode, and other functions.

7. Cursor
   Scroll left or right to switch between pages.

Playback mode and position memory
When the car is restarted, the system resumes the previous mode before switching off. For the radio, it will resume the radio channel before switching off.
For music or video, it will resume playing the last song or video before turning it off.

Setting

1. Touch the setting icon [ ] on the front panel to enter the Settings interface. Select the corresponding option to enter the corresponding settings option. Move the options bar up and down to find the desired settings.

Rete e Internet

• WI-FI
  Select On to achieve the Wi-Fi, then select the desired access points and insert the password.

• Hotspot
  Select On to achieve the Wi-Fi hotspot, then select the desired Network name and insert the password.

Car Infotainment (Common)

Standby Time
This function allows to delay the switching off of the device through the selected time.

Car Infotainment (Common)

Assistive Touch
Users can choose on or off-the-touch assist. The touch assist has the 7 most commonly used options and is displayed on top of the screen at the interface where it provides the user with easy maneuvering of the unit.

Reverse Volume Suppression
In order to adjust the volume while you drive in reverse mode, select one of four settings between None, Weak, Medium, and Strong.
The volume will be reduced according to the selection.

Boot logo
To select the welcome logo it is necessary to enter the password (5678). After selecting the desired logo press (OK) to confirm the logo update.

All Setting
In order to restore all factory settings, press the OK button on the popup dialogue. All your settings will be removed.

System Restore
By selecting System Restore, all applications installed by the user will be removed and the system will restore to the factory settings.

• Daytime Backlight Set
  Adjusts the brightness of the screen in day mode.

• Nighttime Backlight Set
  Adjust the brightness of the screen in night mode.

• Auto Mode
  When the vehicle lights are switched on, it is possible to select automatically the brightness mode of the screen according to the above settings.

• Key Light Color
  Allows you to select the color of illumination keys.

Car Infotainment (Volume) Volume
The volume level can be changed according to the selected source.

Car Infotainment (Sound)

Sound
The sound can be modified through the graphic equalizer and at the moment it is possible to modify the prostrate point by using the four arrows.

Car Infotainment (Video)

• Disable Video in Motion
  Video playback is disabled for your safety. Engage the parking brake to watch the video or select the switch in the ON position.

• Reversing Warning Line
  By enabling this option, while driving at the reverse position the assistant line will be shown at the display.

• Reversing Assistant Line
  NOTE : This feature can only support certain car models.
  By enabling this option at the reverse position, the assistant line will be shown at the display by moving the steering and aligning in accordance with the steering movement during reverse.

• Air Conditioner
  NOTE : This feature can only support certain car models. By enabling this option, the air conditioner of the car will be displayed during adjustment.

• Front Cam
  Enabling this option, after having disengaged the reverse gear, it will be possible to view the front camera for a time between 3, 5, or 8 seconds.

Car Infotainment (Navigation)

• Autostart Navigation
  Allows the user to set the automatic start of the navigation system when the unit is turned on:

• File Path
  Allows the user to customize the navigation system according to the installed applications.

• Navi Mixed
  Allows the user to mix the audio of the navigation system with the audio of the media sources being played.

Car Infotainment (Bluetooth

• Pin Code
  To connect your Bluetooth device to the unit, you need to pair the device to the unit. Pairing needs only to be done once. Enter default password “0000”.

• Auto Connect
  By enabling this function, the unit will auto-search and auto-connect with the last connected device.

• Auto Answer
  By enabling this function, the unit will auto-answer all incoming calls.

Car Infotainment (SWC)

Steering Wheel Control Programming
Please follow the steps below to set the functions of your steering wheel.

1. Press CLEAR ALL before proceeding
2. Press a button on the steering wheel
3. Touch the corresponding feature of the control button on the touch screen.
4. When the control button turns blue, it means that the setup was successful.
5. Repeat steps 2 – 4 to complete all controll button settings available on your steering wheel.

Car Infotainment (About Device)

System

Touch the System icon to set the language of the user interface and to set the date & time. Languages & input

• Allows the user to set the system language.
• By “Add a language” it is possible to add a different language from the default.
• Scroll down the list of available languages, select the desired language, and press to confirm.
• To define the system language, drag the desired language to position 1

Data & time

• Allows the user to set the Datye & time.
• Follow the different options provided by the system to obtain the time and date displayed on the product.

About car

• Information on the product is shown

Radio

Touch the radio icon on the main interface to enter radio mode. You may also touch the radio icon at the application page.

1. Band Search
   Press Band to select FM1, FM2, FM3 and for AM1, AM2

2. Search for radio channels
   Use the arrow icon (< / >) to search for the next or previous radio station.
   When a radio station is found, the search will stop automatically and the unit will sound.

3. Automatic search
   When you press the search button, the system will automatically search for frequency 88.00 at frequency 108.00 until the unit finds the radio station with the strongest signal.
   To stop the search, tap the icon again.

4.  Stereo/Mono
   Allows you to select the reception mode between Stereo or Mono.

5. Volume
   Scroll the bars left and right to adjust the volume level.

6. Audio settings
   Use the icon to adjust the sound of the system.

7.  Sound settings
   When ACC is connected, press the power button on the front panel to turn on the unit. Turn off the unit and disconnect the car key to turn off.

8. Preselection of radio channels
   Each band can store up to 6 radio channels.
   The system can store 24 radio channels (18 FM channels and 6 AM channels).

DAB

Touch the radio icon on the main interface to enter DAB mode. You may also touch the radio icon at the application page.

DAB radio overview
Overview

1. DAB signal level

2. Broadcaster logo
   (this service may not be provided by the tuned broadcaster)

3. Information

4. Previous station

5. Next station

6. List of favorite stations

7. General settings

8. List of received stations

Settings

1. General
   App startup settings

2. Cage
   Graphic personalization of the screen

3. Audio
   Audio settings

4. Stations
   Automatic scan

5. Channel logos
   Issuer logos update

6. Information
   Application info

Video
Touch the music video icon at the main interface. It supports flash internal storage cards, music, and video stored in USB drives, ape, FLAC, and other formats.

1. Video folder
   The video folder contains all the folders containing the videos.

2. Collection
   The collection contains your favorite video file
   In the video list, you can select videos that will be directly visible in the list of the collection.

3. History
   The list shows the video previously played on

4. Video files
   Press the desired video to start the playback

5. Favorite
   Highlight the icon to allocate the video in the favorites collection list.

6. Screen video format
   Best fit – Fit horizontal – Fit vertical – Full screen – 16:9 – 4:3 – Center.

7. Repeat file
   Press to repeat single or folder playback.

8. Previous Video
   Press to return to the previous video.

9. Play & Pause
   Press to start playback or to Pause the video.

10. Next video
    Press to go to the next video.

11. Collection favorite
    Press to select the favorite videos in the collection list.

12. Back to video home
    Press to go back to the home page.

Music
Touch the music icon at the main interface. It supports flash internal storage card, music and audio stored in USB drive. The unit supports MP3 cover display.

1. Audio folder
   The audio folder contains all the folders containing the audio.

2. Collection
   The collection contains your favorite audio file.
   In the audio list, you can select audio that will be directly visible in the list of the collection.

3. History
   The list shows the audio previously played on

4. Audio files
   Press the desired audio to start playback

5. Favorite
   Highlight the icon to allocate the audio in the favorites collection list.

6. Volume
   Press to adjust the volume.

7. Equalizer
   Press to adjust the sound of the system.

8. Previous audio
   Press to return to the previous audio track.

9. Play & Pause
   Press to start playback or to Pause the video.

10. Next audio
    Press to go to the next audio track.

11. Collection favorite
    Press to select the favorite audio in the collection list.

12. Back to audio home
    Press to go back to the home page.

Bluetooth
Bluetooth’s hands-free function enables you to call safely while driving. Touch the Bluetooth icon to enter in the bluetooth setting.

1. Pairing

   • To activate the bluetooth hands-free function, pair your mobile phone with the unit.
   • Turn on bluetooth and bluetooth device search function on your mobile phone.
   • Search for the name M-AN6560 of the unit.
   • You are required to key in the corresponding PIN number i.e. 0000 on your mobile phone to connect to the unit.
   • Once connected, a “CONNECTED” sign will appear on the screen.

2. Keyboard
   Upon establishing the bluetooth connection, the user can dial directly on the phone or key in telephone numbers on the dial pad.

   • Touch ( A ) to delete the incorrect number dialed.
   • When you dial a telephone number, press ( B ) to call or ( C ) to hang off.
   • During the conversation, the user can touch ( D ) on the screen to switch between private mode and loudspeaker.

3. Phonebook
   The contacts can be downloaded from a mobile phone to the unit.

4. Call history
   Call history shows outgoing calls, incoming calls, and missed calls. User can perform call or delete in call history.

5. Connection
   If the mobile phone has already been paired with the unit, press to re-connect the device.

6. Disconnection
   Press unplug the device.

7. Phonebook synchronization
   The contacts can be downloaded from the mobile phone to the unit.

   • Once bluetooth is connected, touch to download the contacts.
   • Once the download is completed, the name of the contact will be shown on the display screen during a phone call. Press ( A ) to view the contact list.
   • For quick access to the contacts, use the name search beginning with the first alphabet ( B ).

Bluetooth

1. Call history
   Call history shows outgoing calls, incoming calls, and missed calls. User can perform call or delete in call history.

2. Bluetooth Music
   This unit supports bluetooth music playing. NOTE : Due to bluetooth compatibility, the unit may not support all features or all phone models.

Navigation

GPS Satellite Navigation Operation
The invention of GPS navigation has brought to the convenience of traveling today. By using GPS positioning and electronic navigation maps, users can reach their destination faster and more efficiently. To navigate accurately, both the GPS positioning and navigation map are equally important. The GPS provides precise positioning and fast calculating speed while the navigation map provides huge information, data, and route planning.

Navigation Map Data
The data of some navigation applications can be stored externally in an SD card or USB drive.

Note:
Some navigation application defaulted their route planning on the map and may not support storage in external SD cards and USB drives.

Installation of APK Navigation Application
Before navigation, please install the APK Navigation Application and ensure the APK navigation map is correctly installed.

Navigation Activation
Upon successful installation of the APK Navigation Application, there will be a corresponding icon on the homepage. Touch the icon to launch the application.
Users can also go to “Car Infotainment” > “Navigation”>”File Path ” to link the navigation button and application. Upon linkage, the user may press the “Navigation Button” to start the navigation directly.

Navigation Application Operation
Please refer to the corresponding operation manual for details on the navigation application.

Dual screen

Dual screen function
Some applications are supported by the dual-screen function. It is therefore possible to divide the screen in half and display two applications simultaneously.

Press to view the open applications and then select the desired applications to be displayed on the screen simultaneously.
Note : some applications may not be supported by screen sharing.

Connection view

Diagram of M-AN6560

The Aux In input, if necessary becomes an input for the front camera video.
Through the settings found in the CAR INFOTAINMNET in the VIDEO> FRON CAM section it is possible to activate the auxiliary input for viewing the front video camera. See page 7

Specifications

General

• Reference Supply Voltage………………………………………………………………………………………………12V
• Operating Voltage Range…………………………………………………………………………………………. 9 – 16V
• Max Operating Current………………………………………………………………………………………………………15A
• Grounding System Car Battery Negative Pole

FM

• Signal Noise Ratio………………………………………………………………………………………………………≥55dB
• Residual Noise Sensitivity (S/N=30dB)…………………………………………………………………….. ≤10dBμV
• Frequency Response (±3dB)……………………………………………………………………………… 40Hz~12KHz
• Station Seeking Level…………………………………………………………………………………………… 23±3dBμV
• Distortion…………………………………………………………………………………………………………………. ≤1.0%
• Stereo Separation (1KHz)…………………………………………………………………………………………… ≥25dB
• Antenna Impedance………………………………………………………………………………………………………. 75Ω
• Frequency range…………………………………………………………………………………………….87,5 /108,0MHz

AM

• Residual Noise Sensitivity (S/N=20dB)……………………………………………………………………… ≤28dBμV
• Selectivity (±9KHz………………………………………………………………………………………………………. ≥50dB
• Frequency range……………………………………………………………………………………………….522/1620KHz

DAB

• Residual Noise Sensitivity (RF=72dBM)………………………………………………………………………….. 60dB
• Stereo Separation (1KHz)……………………………………………………………………………………………. ≥55dB
• Frequency range………………………………………………………………………………………………. 174 /240MHz

BT

• Frequency…………………………………………………………………………………………………. 2,402 – 2,480GHz
• Power output
• Frequency Response (±3dB………………………………………………………………………………. 50Hz~16KHz
• Maximum Output Power……………………………………………………………………………………………. 4×45W
• Load Impedance…………………………………………………………………………………………………………….. 4Ω

AUX IN

• Distortion………………………………………………………………………………………………………………….. ≤0.5%
• Frequency Response (±3dB………………………………………………………………………………. 50Hz~20KHz
• Audio Input Level……………………………………………………………………………………………………. 0.5Vrms

Audio

• Audio Output Impedance……………………………………………………………………………………………… 100Ω
• Audio Output Level……………………………………………………………………………………………. 2Vrms(Max)

Video

• Normal Video Input Level (CVBS……………………………………………………………………………… 1.0±0.2V
• Video Input Impedance………………………………………………………………………………………………….. 75Ω

Environment

• Operating Temperature………………………………………………………………………………….. -20°C ~ +70°C
• Storing Temperature……………………………………………………………………………………… -30°C ~ +80°C
• Operating Humidity…………………………………………………………………………………………… 45%~80%RH
• Storing Humidity………………………………………………………………………………………………. 30%~90%RH

Declaration of Conformity

The manufacturer GMA ITALIA s.r.l. declares that the type of radio equipment – Multimedia Monitor, model M-AN6560D, brand Macrom – complies with the 2014/53 / EU Directive.
The full text of the EU Declaration of Conformity is available at the following internet address: www.macrom.it, or at GMA ITALIA s.r.l. – V. Di Vittorio, 7/33 Rho – 20017 (MI) Italy
Made in China by
GMA ITALIA s.r.l. – Via G. Di Vittorio, 7/33 Rho – 20017 (MI) Italy

Information on disposal of the unit

This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE).
This means that this product must be handled to the local collecting points or given back to the retailer when you buy a new product, in a ratio of one to one (or one to zero if the external dimension is less than 25 cm) pursuant to European Directive 2012/19/EC in order to be recycled or dismantled to minimize its impact on the environment.For further information, please contact your local or regional authorities. Electronic products not included in the selective sorting process are potentially dangerous for the environment and human health due to the presence of hazardous substances. The unlawful disposal of the product carries a fine according to the legislation currently in force.
www.macrom.it

References

• Macrom | Macrom

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>