BOWER BB-RLMULTI 6 Inch Ring Light Multipod User Manual

BOWER BB-RLMULTI 6 Inch Ring Light Multipod

Product Information

The Smart Photography Series 6 Ring Light Multipod is a versatile and portable photography accessory. It features a wireless remote shutter, a rotating phone holder, and three brightness levels with adjustable color temperatures. The multipod can extend up to 32 inches and is compatible with most smartphones.

Key Features

• Wireless remote shutter for easy control
• Rotating phone holder with adjustable clamps
• Three brightness levels: White, Natural, and Warm
• Adjustable color temperature
• Extends up to 32 inches
• USB rechargeable with a built-in battery

Product Usage Instructions

Setting Up the Multipod

1. Loosen the locking knob by turning it counter-clockwise until moderately loose.
2. Flip up the Ring Light up.
3. Tighten the locking knob by turning it in a clockwise direction to set the Ring Light position.
4. Pull apart the tripod legs and extend the center column until the desired height is achieved (up to 32 inches).
5. Pull out the upper and lower clamps from the rotating phone holder.
6. Lift the spring-loaded upper clamp and insert your phone.

Using the Ring Light
To turn on the Ring Light and adjust the brightness levels:

1. Press and hold the ON/OFF button located on the underside of the Ring Light until the light turns on.
2. Click the button repeatedly to switch between Warm, Natural, and White Light modes.
3. Press and hold the button to turn off the power.

Charging the Ring Light
To charge the Ring Light:

1. Connect the smaller tip end of the USB charging cable to the underside of the Ring Light.
2. Connect the bigger USB tip to a USB port on your computer, laptop, wall charger, power bank, or other compatible device.
3. An illuminated red light indicates that charging is in progress. The red light will turn off when charging is complete.

Using the Wireless Remote
To use the wireless remote:

1. Slide up to remove the remote from the Multipod.
2. For pairing, follow the instructions provided in the manual.
3. To power off the remote, press and hold the camera button for 3 seconds. The indicator light will flash and then go out.

Please note that this product comes with a one-year limited warranty. For further details and warranty coverage, refer to the warranty information provided by S. Bower Inc.TM This product warranty is valid only within the United States and may not apply to products sold in other countries.

PRODUCT INTRODUCTION PARTS

• 6” Ring Light Multipod
• Wireless Remote Shutter (attached to Multipod)
• USB Charging Cable

HOW TO SET UP

• STEP 1:
  Loosen the locking knob by turning counter-clockwise until moderately loose .

• STEP 2:
  Flip up the Ring Light up. Tighten the locking knob by turning in a clockwise direction to set the Ring Light position.

• STEP 3:
  Pull apart the Tripod legs and extend the center column until the desired height is achieved. Extends up to 32”.
  IMPORTANT! For the Tripod to stand balanced on its legs the center column base must not touch the ground surface. Pull out the center column until the base hovers above the ground surface.

• STEP 4:
  Pull out the upper and lower clamps from the rotating phone holder. Lift spring loaded upper clamp and insert the phone.

HOW TO SET UP
(Selfie Stick)

1. STEP 1:
   Make sure the Tripod legs are in the closed position and locked in place. Extend the center column extension to the desired length. Press the shutter button to record a video or take a photo. Look at the pairing instruction page.

HOW TO USE
(Turn ON Ring Light)

• STEP 1:
  Press and hold the ON/OFF button located on the underside of the Ring Light until the light turns on. Click repeatedly to switch between Warm/Natural/White Light modes. Press and hold to turn the power OFF.

HOW TO USE
(Charging the Ring Light)

IMPORTANT! Do not remove the rechargeable internal battery. May cause damage or injury.

• STEP 1: Connect the smaller tip end to the underside of the Ring Light. Then connect a bigger USB tip to a USB port (Computer/Laptop/Wall Charger/ Power Bank, etc.) to begin charging. Illuminated Red color light indicates charging is in progress. When charging is complete Red light will turn off.

HOW TO USE
(Wireless Remote)

STEP 1 (Wireless Pairing) :
Press and hold the camera button for 3 seconds to turn on. The indicator light flashes for 4 seconds to enter the pairing state and the Blue indicator light of the pairing state flashes. Go to your phones Bluetooth® settings(turn Bluetooth® ON) and search for “Bower RL”, press it and the Blue indicator light will turn off after pairing is successful Begin capturing photos and videos!

• No Pairing: After booting, in the state of no pairing connection, it will automatically shut down after 5 min. of no operation.
• Pairing : After turning on the phone, when the 6” Ring Light Multipod is connected to the phone, it will enter the dormant state if there is no operation for 10min., and it will automatically shut down after another 10min.
• Power Off: In power on and sleep mode, press and hold the camera button for 3 seconds to power off, the indicator light flashes and goes out.

FEATURES

• 6” Ring Light: Choose from three different lighting modes: Warm, Natural, White and three different brightness settings
• Extendable Tripod up to 32” + Selfie Stick allow for versatile use
• Includes detachable Wireless Remote for your convenience
• No batteries required: rechargeable internal battery with USB Charging Cable
• Great for travel, folds to compact size

SPECIFICATION

• Power Supply: USB Power Supply
• Input power: 5W±10%
• Color Temperature: 3000 k / 4000 k / 6500 k
• Luminous flux: 1 40 LM
• CRI : > 85
• Stroboscopic : No
• Dimming : 3 Level Dimming
• LED bead type: 0.2W/2835 Lamp Beads: 56
• Battery Capacity : 1200mAh
• Product size: 6.7” x 6.1” x 3”

Compatible with Android® 4.2.2 and above/iPhone iOS® 5.0 and above. Android devices only: If you have changed your “Volume Keys Function” under camera options, make sure to change it back to default, or “take pictures” for the 6” Ring Light Multipod to work properly

Disclaimer:
This manual should be kept for future reference and maintenance purposes only.

• Be sure to review this manual and become familiar with its features before using this product.
• Please make sure to never change the light bulb while plugged into an outlet or other power source.
• Do not open or change wiring in any way.
• Keep this product away from children. Clean this product often with a soft, dry cloth. This product shall ONLY be used with rated voltage and frequency.
• Do not try and alter the power supply or adjust the voltage.
• Avoid unplugging the power by pulling the power cord and do not touch the power cord with wet hands.
• Never attempt to insert any metal objects into the cooling holes of illuminators.
• Avoid moving the illuminator by pulling the power cable. Stop using this product if the unit is damaged, especially the power cord.
• Do not use it in the rain, bath, or near water source. Please be aware that improper use or inappropriate repair can lead to fire or electrocution.
• Indoors use only. Please send it back to Bower or contact customer service for issues regarding maintenance or repair.
• Make sure everything is secure before proceeding.
• Make sure the product is intact and that there are no missing parts.

All photos and illustrations are for instruction purposes only.

LIMITED One (1) Year Limited Warranty

S. Bower Inc.™ One (1) Year Limited Warranty:
This warranty gives you specific legal rights and you may have other rights which vary from state to state. The S. Bower Inc.™ Limited Warranty is a voluntary manufacturer’s warranty provided to the consumer. This warranty provides rights separate from rights provided by consumer law, including but not limited to those relating to non-conforming goods. S. Bower Inc.™ One-Year Limited Warranty benefits are in addition to, and not instead of, rights provided by consumer law and it does not exclude, limit, or suspend a buyer’s rights arising from consumer law. Consumers have the right to choose whether to claim service under the S. Bower Inc.™ One-Year Limited Warranty or their consumer law rights. The S. Bower Inc.™ One-Year Limited Warranty terms and conditions shall not apply to consumer law claims, contact your local consumer organization.

Please note : All claims made under the S. Bower Inc.™ One-Year Limited Warranty will be governed by the terms set out in this warranty document. S. Bower Inc.™ warrants to the product owner that this product will be free against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase when used by S. Bower Inc.™ ’s user manual. Under this warranty, you will be able to send your claims and defective product to S. Bower Inc.™, via freight prepaid, along with proof of purchase, and will be repaired or replaced, based on S. Bower Inc.™ sole discretion. Repair and/or replacement may be made with new or refurbished product components at S. Bower Inc.™’s sole discretion. This limited warranty does not cover failures due to abuse, accidental damage, or when repairs have been made or attempted by anyone other than S. Bower Inc.™ personnel.

A defective product meeting the warranty conditions set forth herein will be replaced or repaired at no charge in either of two ways:

• The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the period of the retailer’s policy for exchanges. Proof of purchase may be required. Please check with the retailer for its specific return policy regarding time limits for returns or exchanges.
• The second option is to send the product (prepaid freight) to S. Bower Inc.™ corporate offices located at S. Bower Inc. 38-09 43rd Avenue 1st Floor Long Island City, NY 11101 for repair or replacement at S. Bower Inc.™ ’s option. Proof of purchase is required. Include your name, return address, and issues that you are experiencing with S. Bower Inc.™ products. All other guarantees, express or implied, are hereby disclaimed.

This warranty does not apply to products sold in countries outside of the United States.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>