ruck AIR MOVEMENT S-Prime Evo Prime Mixed Flow Fans Instruction Manual

: June 13, 2024
: ruck AIR MOVEMENT

Table of Contents

ruck AIR MOVEMENT S-Prime Evo Prime Mixed Flow Fans
Product Information
Product Usage Instructions
Safety Notes
Maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ruck AIR MOVEMENT S-Prime Evo Prime Mixed Flow Fans

Product Information

Product Name: S-Prime Evo
ID: UfPINtA
Voltage: 120V ~
Frequency: 60Hz
Power: 70W (for 6 S-Prime Evo), 184W (for 8 S-Prime Evo), 237W (for 10 S-Prime Evo)
Current: 0.62A (for 6 S-Prime Evo), 1.56A (for 8 S-Prime Evo), 2.01A (for 10 S-Prime Evo)

Product Usage Instructions

Safety Notes: It is the responsibility of the installer to ensure compliance with all relevant safety regulations regarding electrical connections and contact protection. The installation should include a protection guard or sufficient length of ducting to prevent electrical shock or injury to persons. It is important to lock the service disconnecting means to prevent accidental power switch-on. A warning device, such as a tag, should be securely fastened to the service panel.
Mounting: The fan should be installed by a qualified person(s) by applicable codes and standards, including fire-rated construction. Care should be taken to avoid damage to electrical wiring and other hidden utilities. Once fastened, ensure that the ducting system is not deformed or twisted to prevent noise carry-over. The fan blade should be positioned at least 7 feet (2.10 m) above the floor.
Operating Conditions: The fan is suitable for general ventilating use only and should not be used to exhaust hazardous or explosive materials and vapors. It is not compatible with solid-state speed controls. The operating conditions should be within the specifications mentioned on the nameplate.
Maintenance: The fan is maintenance-free. However, it is recommended to install an air filter to prevent dust and debris accumulation on the impeller and housing, which can lead to lower performance, unbalance, and reduced lifespan. Cleaning should be done using a soft cloth or mild detergent. Avoid cleaning with water or high-pressure cleaners as it may cause damage to the fan. Regular maintenance and cleaning can significantly extend the lifespan of the fan.

Safety Notes

ruck tube fans are not finished machines, but part of a system. Thus, the systems installer carries the responsibility that all relevant safety regulations regarding electrical connections and contact protection are complied to.
Special care should be taken regarding contact protection (protection guard or sufficient length of ducting).

WARNING – TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

Use this unit only in the manner intended by the manufacturer.
If you have questions, contact the manufacturer.
Before servicing or cleaning the unit, switch the power off at the service panel and lock the service disconnecting means to prevent power from being switched on accidentally.
When the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

Mounting

WARNING – TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

Installation work and electrical wiring must be done by a qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.
When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.
Exhaust ducted fans must always be vented to the outdoors.
ruck tube fans can be mounted in any position.
The Tube Fans can be plugged directly into the duct and fastened, making sure the ducting system is not deformed or twisted.
For mounting, we recommend lined fast clamps that reduce noise carry-over into the ducting system.

CAUTION – Read installation instructions prior to installation of this fan.

Operating Conditions

Do not operate fans in a potentially explosive atmosphere.
Do not operate fans with a frequency converter.
Pay attention to the maximum ambient temperature on the nameplate.

CAUTION – For general ventilating use only. Do not use to exhaust hazardous or explosive materials and vapors.
NOT SUITABLE FOR USE WITH SOLID-STATE SPEED CONTROLS.

Maintenance

ruck with the exception of recommended cleaning intervals are maintenance free.
Deposits from dust-laden air will in time accumulate on the impeller and housing. This leads to lower performance, unbalance in the unit, and reduced lifespan. We therefore recommend that an air filter be installed.
Under no circumstances should the interior space be cleaned with water or high-pressure cleaner (steam jet cleaner).
Through the installation of an air filter, the cleaning interval can be extended or avoided.

Devices with external cable and plug • Appareils avec câble externe et prise