Vortex Cellular ZTab10 8 Inch Tablet User Manual
- June 13, 2024
- Vortex Cellular
Table of Contents
ZTAB 10
User Manual
PRODUCT HEX-VISION IMAGE
VOLUME BUTTON: Short press to adjust the volume.
PRODUCT HEX-VISION IMAGE
POWER BUTTON: Long press to turn on the device; When the device is on, short press Power Button to shutdown or turn on the screen.
CARD INSERT MANUAL
Insert Micro-SIM Card
Insert a Micro SIM card. Insert the Micro-SIM card with the chip facing down.
Note the direction of cutting a Micro-SIM card into a slot.
Reminder:
Please use standard Micro-SIM card .Please don’t use a nonstandard card that
is hand-cut 。
TF Card lnstallation
Please place the metal contact of the TF card adown ,be aware of the direction
of the cut edge.
Insert the card directly into the device.
Reminder:
Please turn off the tablet before changing or replacing the TF card.TF card
does not come with the tablet. Please purchase separately.
Do not insert or remove the SiM card when the tablet is turned on.
SIM MANAGEMENT
Please insert the SIM card to the SIM slot. have device default to the 4G
value.Or you can choose your preferred network types of 4G/3G/2G via Setting >
Network & lnternet >Mobile network >Preferred network type.
NETWORK CONNECTION
Connecting WIFI
lnto the setting of WIFI via Settings > Network & lnternet > Wi-Fi When WIFI
is on, a list available WiFi connection will appear.
Click on the one you want to connect to,enter the password if the network is
encrypted, then click Connect .When it’s a public network,just click Connect.
When the network shows “connected”, it is available to use .
Bluetooth Function
Into the setting of Bluetooth function via Settings > Connected devices >
Bluetooth Enable the Bluetooth function by clicking the Menu Button then
select “Refresh”, then the tablet will search for available Bluetooth devices
for pairing and list on the screen. Click on the one you want to pair with
,then click “Pair “on the dialog pop-up. Documents are available for
transmission after Bluetooth pairing .
Reminder :
Slide down the status bar to open the shortcut switches for Bluetooth and
other functions.
WIFI Hot-spot Setting
Click on via Settings > Network & tethering > Wi-Fi hotspot to turn on the
Portable WIFI Hot-spot functioning .
When setting up WIFI hot-spot , enter your user name in “Network Name”and
password ,then click Save .
Reminder :
Please enable the Data Connection before enabling the network sharing
function. Your mobiletraffic will be shared by other devices, so please use it
carefully .The signal of the WIFI hot-spot depends on the signal strength and
devices .
CAMERA
Aim the camera at the shooting object, the tablet will start focus
automatically ; or you can click on the screen to choose the object you want
to focus on, then click ” Capture” icon to take photos . You can also choose
other modes such as video recording ,beautifying , panorama to take
photos/videos.
SECURITY INFORMATION
Security information (including BS, ES, battery securityinformation)of third-
party software installation and function may vary in different regions or by
different hardware specifications. Vortex holds disclaimer for the performance
problem or incompatibility caused by third-party applications, registry
editing ,OS software modifying .Customizing the OS may cause the device or
some applications fail to work properly.
Please prevent the device or the battery in extreme cold/hot condition. Then
extreme temperature will lead to deformation of the tablet and reduce the
charging capacity and battery life.
Please only use the custom designed and approved battery and recharger by
Vortex.lncompatible battery and rechearger may cause damage to the tablet .
Please abide by local regulation when disposing of the used batteries and
tablet.
Please do not place the battery or the tablet onto or inside heating devices
such as microwave, oven or radiator. The battery may explode if it gets too
hot.
Please do not crush or pierce the battery . Prevent the battery from getting
high pressure from outside , it may cause internal short and overheating .
SPECIFICATIONS
BASIC INFORMATION
Model: ZTab10
Operating System Android™ 13
CPU MT8766 4x Arm Cortex-A53 2.0GHz
GPU IMG GE830@660MHz
RAM 4GB
ROM 32GB
Battery 6000mAh
Display
Screen Size 10.1 inch
Resolution 1280800 Pixeis
Touch Capacitive multi-touch
Cameras
Rear Camera 8MP Camera Front Camera
8MP Camera
Connection(I/O)
Band GSM:B2/3/5/8
WCDMA :B2/4/5/8
FDD:B2/3/4/5/7/12/13/17/25/26/28A/28B/66/71
TDD:B41Full
SIM/TF card 1 Micro SIM Card and 1 TF Card
WiFi IEEE802.11 a/b/g/n/ac
Bluetooth Bluetooth 5.0
GNSS GPS/Glonass/Galileo
FM YES
Earphone Port 3.5mm
USB Port Type-C USB
Other Features
Video File Format 3GP/MPEG4,etc
Audio File Format WAV/MP3/AAC/AMR/MIDI/APE/WMA,etc Card
Extend Support TF card up to 256 GB
Language Support Multi-language
Sensor G-Sensor,L-Sensor.
In the box
1tablet
1Type-c Cable
1 Power Adapter
1*Quick Start Guide
Safety Statement
FCC Caution:
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISEDC Warning
Operation of 5150-5250 MHz is restricted to indoor use only. This device
complies with Innovation, Science, and Economic Development Canada licence-
exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference that may cause undesired operation of the device.
Specific Absorption Rate (SAR) information SAR tests are conducted using
standard operating positions accepted by the FCC/ISEDC with the phone
transmitting at its highest certified power level in all tested frequency
bands, although the SAR is determined at the highest certified power level,
the actual SAR level of the phone while operating can be well below the
maximum value. Before anew model phone is a available for sale to the public,
it must be tested and certified to the FCC/ISEDC that it does not exceed the
exposure limit established by the FCC/ISEDC, tests for each phone are
performed in positions and locations as required by the FCC/ISEDC. For body
worn operation, this model phone has been tested and meets the FCC/ISEDC RF
exposure guidelines when used with an accessory designated for this product or
when used with an accessory that contains no metal and that positions the
handset a minimum of 10mm from the body. Non-compliance with the above
restrictions may result in violation of RF exposure guidelines.
For body-worn operation, this device has been tested and meets the FCC/ISEDC
RF exposure guidelines when used with a leather case. The users must use this
leather case. Use of other leather case may not ensure compliance with
FCC/ISEDC RF exposure guidelines.
| BE| BG| CZ| DK| DE| EE| IE| EL
---|---|---|---|---|---|---|---|---
ES| FR| HR| IT| CY| LV| LT| LU
HU| MT| NL| AT| PL| PT| RO| SI
SK| FI| SE| NO| IS| LI| CH| TR
In all EU member states, operation of 5150-5250 MHz is restricted to indoor use only.