Intenso TX500 Portable External SSD User Manual

June 13, 2024
Intenso

Intenso TX500 Portable External SSD

Product Information

The Intenso Portable SSD TX500 is a high-speed external solid-state drive. It has a USB 3.2 Gen 2×1 interface, offering a maximum transfer rate of 10 Gbps. The dimensions of the SSD are 94 x 54 x 10.5 mm, making it compact and
portable. It is compatible with both USB-C and USB-A connections, providing flexibility in connectivity options.

Scope of Delivery The package includes the following items Intenso USB 3.2 Gen 2×1 Super Speed 10 Gbps external SSD – USB 3.2 USB-C cable – USB-C to USB-A cable – Operating instruction manual 2.

OVERVIEW

Scope of delivery

Intenso USB 3.2 Gen 2×1 Super Speed 10 Gbps external SSD (downwards compatible)

  1. USB 3.2 USB-C cable
  2. USB-C to USB-A cable
  3.  Operating instruction

Please check whether the contents of the packaging (see also graphic at the beginning of the manual on page 2) are complete and undamaged. If this is not the case, please contact the seller or our service de-partment:
[email protected]

Declaration of conformity

The CE marking says that this product meets the requirements of all EU Directives applicable for this product.

GENERAL

About these instructions
Please read this manual carefully and observe and follow all the instructions mentioned in it to ensure a long service life and reliable use of the device. Keep this manual handy and pass it on to other users of the device.

Intended use

The main purpose of this external SSD is the storage of data from PCs, Notebooks, Ultrabooks or MAC computers. This product is not intended for commercial use or for medical and special applications, where the failure of the product can cause injuries, mortalities or considerable material damages. In the case of use which does not correspond to the intended use, the liability expires. The opening as well as conversion of the device and the use of additional devices and accessories, which are not approved by us, must be refrained from. Do not use the external SSD under extreme ambient conditions and observe the safety instructions. Non-observance of the information and safety instructions in these Instructions is deemed as non-observance of the intended use and leads to expiry of the liability and can lead to personal or material damages.

System requirements
This external SSD is compatible with the operating systems MS Windows 8 or later and Mac OS 10.x or later.
*Trademarks: Windows 8 is registered trademark of Microsoft Corporation. Macintosh and MAC are regis-tered trademarks of Apple Computer. All brands and third party names are the property of the respective user.

Notes:
For the operation of the USB 3.2 Gen. 2×1 an USB 3.2 Gen. 2×1 interface is needed. The external SSD offers a downward compatibility with previous USB standards.
The hardware configuration of your PC and the used operating system can influence the compatibility of the external SSD.

Connecting the external SSD

To connect the external SSD to your computer, please only use the supplied USB cable. Connect the USB 3.2 connector to the Intenso SSD and the USB 3.2 connector of the other cable end to your computer.
The computer recognizes the “new hardware” and installs the driver automatically. Wait until the driver installation is completed. In the “workplace” there is now another drive with the designation “Intenso” available.
As soon as the external SSD is connected with the computer, the LED lights up. The LED flashes when a write or read operation is carried out.

Removing the external SSD

Depending on the used operating system, the external SSD must be logged off before the connection to the computer is interrupted. For further details please refer to the Help Section of your operating system provider. The device may not be removed when it is still being accessed (flashing LED). This can lead to damages and/or data loss. Please close all the files located on the external SSD (photos, documents, etc.) before removing the external SSD.

SAFETY INFORMATION

Dangers for children and persons with restricted physical, sensory or mental abilities:

Children often underestimate dangers or do not recognise them at all. This device is not intended to be used by persons (including children) with restricted sensory, physical or mental abilities or lack of experience and/or knowledge, unless they are supervised by a person responsible for their safety or received instructions from the person on how to use the device and they have understood the resultant dangers. Unsupervised children should not have access to the device. Make sure that children do not play with the device.

General safety instructions

  • The device may not be exposed to spray or dripping water.
  • Do not place containers filled with liquids (vases, glasses, etc.) on the device or in its immediate vicinity. There is a risk that the container will tip over and the liquid will affect the electrical safety.
  • Do not operate this appliance with wet hands.
  • Do not insert any items, which are not intended for its use, into the openings of the device. This could lead to an electrical short-circuit and a resultant fire.
  • Do not block or cover the openings of the product.
  • Do not use the device if there is visible damage to the device itself or to the USB cable.
  • When positioning the device, pay attention that no one can tread on the cable or trip over it. Do not place any objects onto the cable.
  • Carry out data backups frequently to avoid a possible data loss.Data recovery is not part of the guarantees and cannot be conducted by our Service Centre!
  • Keep the device away from any type of moisture and avoid dust, heat and direct sunlight.
  • Do not open the housing of the device and do not disassemble it into its component parts. Do not try to repair it yourself. The guarantee expires in this case.
  • Avoid using the device in strongly magnetized areas such as, for example, in the direct proximity of TV sets, loudspeakers, etc. to avoid data loss or other malfunctions.
  • During operation pay attention to a vibration-free base to avoid damages.

SERVICE

Email (technical support): Email (RMA number): Internet:
Telephone (technical support):

TECHNICAL DATA

EXTERNAL SSD USB 3.2 GEN 2×1 SSD

Dimensions:| 94 x 54 x 10.5 mm
Ready for operation:| between 5°C and 40°C
Transfer rate:| max. 10 GBit/sec (USB 3.2 Gen.2×1)
Capacity calculation:| 1 MB = 1,000,000 bytes

1 GB = 1,000,000,000 bytes

DISPOSAL



| Disposal of old electronic equipment

The devices marked with this symbol are subject to the European Directive 2012/19/ EC. All electrical appliances and old electrical appliances must be disposed of separate from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. You avoid environmental damage with the proper disposal of old electrical equipment.

---|---
**| Packaging:**

Packaging is raw material. The packaging material of this product is suitable for recy cling and can be re-used. Please pay attention to the local recycling provisions when disposing of any materials.

EXCLUSION OF LIABILITY
Changes to the firmware and / or hardware can be made at any time without prior notification. For this reason it is possible that parts of the manual, technical data and images in this documentation may devia-te slightly from the product in your hand. All products described in this manual are only for the purpose of clarification and must not necessarily match any certain situation. No claims can be made based on this manual

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Intenso User Manuals

Related Manuals