ZUMIMALL GX1C Battery Powered Camera User Guide

: June 6, 2024
: ZUMIMALL

ZUMIMALL GX1C Battery Powered Camera User Guide

Warranty Service

Thanks for your shopping and trust.

We are keeping to optimize product, and improve our life time customer service to offer you a better shopping experience.If you have any problems, please feel free to send us an E-mail.We will solve your problems in 24 hours. Besides, Your advice or suggestions will be much appreciated and welcomed.

Register via link below to get 3 Years Warranty Extension. http://bit.ly/zuReg

Product Service
Email: gx1c@zumimall.com
Distributor: distributor@zumimall.com
Cell/ iMessage/ SMS/ Whatsapp/ Wechat: +8618938687483

More About Us
Facebook: www.facebook.com/zumimalloffice
Official Web: www.zumimall.com

What’s in the Box

ZUMIMALL Battery Camera *2
Outdoor Metal Mount *2
USB Cable *2
Quick User Guide *1
Screws Set *2

Product Diagram

Camera Lens
IR
PIR Sensor
Antenna
Antenna
Microphone
Reset Button
LED Indicator
Speaker
Power button
SD Card Slot
USB Port

Power Button	Keep Pressing for 5-10 seconds to power on/power off
Reset Button	Keep pressing for 5-10 seconds to reset and restart
Blinking slowly in Red	Awaiting Wi-Fi Connection, ready for adding devices
Blinking fast in Red	Wi-Fi Connecting
Red spot	Network Problem
Blue spot	Wi-Fi Connected, camera running normally
Blinking slowly in Blue	AP Mode

Download & Install APP

Download CloudEdgeAPP from Google Play™ or APP Store™ . Or scan the QR codes as below,with your QR code scanner in your smart phone.

NOTE:

Google Play is a trademark of Google Inc.
APP Store is a service mark ofApple Inc.

App Icon

iOS

Android

*Tips: Please turn on both of the following permissions.

Allow CloudEdge to access mobile cellular data and be failed to connect the camera.
Allow CloudEdge to receive pushed messages, otherwise the phone will not receive alarms when motion is detected.

Account Registration

New users need to sign up by e-mail/Facebook. Click “Sign up”, and follow the steps to complete the registration, and then log in.

Account Registration

Camera Setup

Preparations for connection

Insert Mirco SD card (NOT included)when the camera is off,for saving videos caused by motion detection automatically.(Supports up to128GB)
Camera only works with 2.4G Wi-Fi,not support 5G.

Connect Camera to APP

Camera Installation

For a cement or ceramic tile wall, it’s recommended to drill holes in wall and fasten with explosion screws provided.
Rotate the protrusion anticlockwise to loose or take off camera. Rotate clockwise to tighten the swivel.

Monitoring Area

It is suggested to make the angular between PIR and detected objects more than
10 degrees.

Monitoring Area

Important Notes for Reducing False Alarms

To reduce false alarms, please note that:

Do not install the camera in a position facing strong lights/mirror/window/Swimming Pool.
Do not place the camera too close to any angel with busy traffic.
Recommended distance between the camera and motion objects are within 10 M (32ft).
Stay away from the outlets,including air conditioner vents, humidifier outlets, the heat transfer vents of the projectors, etc.
Keep the camera at least 1 meter away from any wireless devices to avoid interference, such as microwave stove,Wi-Firouters and etc.

1

| Device List| 15|

Volume On/Off

---|---|---|---

2

Preview

4

Body Detection On/Off

6

Cloud Storage

8| Messages| 22| Record Video to Phone

9

Zoom

11

History Screenshot

13

|

Battery Status

| 27| Alarm record Album
14| HD/SD Switch| 28|

Date of History Record

Camera Settings

*Tips: The person to be shared must register his/her own account in APP.

PIR Body Detection

Body Detection Alarm Setting

The default PIR sensitivity is “High”, but it is adjustable. Please refer to the pictures as below.

Sensitivity	Detecting Distance (For moving and living objects)
Low	Up to 5 meters (16ft)
High	Up to 10 meters (32ft)

*Tips: Higher sensitivity offers longer detecting distance, but it would lead to more false alarms. You are advised to adjust to “Low” level when you install the camera outside.

Alarm Notification

This camera is not designed for 7×24 all day recording.It is only triggered when body motion is detected. Here are system’s reactions:

Alarm notifications with sounds from APP.
Pictures/videos automatically storage in SD Card or Cloud.

Records/Playback/Delete

On “MESSAGES” page, click “Alarm Messages”, you can view all the records listed.
Click the following buttons to playback or delete.

Two -Way Audio

Step 1: Activate the audio option.
Step 2: Press and hold the intercom button to speak.
Step 3: Release the button to listen.

Battery Management

The built-in 10400 mAh battery can last 3-6 months, assuming the camera has been triggered within 15 times/day.
App will send you reminding message for charging when the battery level is less than 20%
Charger Standard: DC 5V1/2A (not included).Camera will be fully charged after 8-16 hours.

Multi Device Management

Multi Camera Management
Multi-User Sharing

Notice: One App account (A) can’t be login on different device at the same time.
Camera can be shared form A to B account.

Step 1: Create another new APP account (B) and login on another phone
Step 2: Click ‘share’ on the main phone (A account phone)
Step 3: Scan QR code of B or Input ID
Step 4: Accept sharing on B account and refresh page

Reset

Step 1: Keep pressing to remove device
Step 2: Press the reset button for 5-10s, until hear the “Boogu” sound
Step 3: Reconnect as before…

Trouble Shooting

No.	Description	Solution
1	Unable to Connect	Check your Wi-Fi name and password Ensure your Wi-Fi is

2.4G. Not support 5G Ensure your camera and phone close to router for set up
2| Reset| Keep pressing the reset button for 3~5 seconds Hear “Boogu” LED blink slowly in Red
3| Change to a New Network| Remove the camera in CloudEdge APP Press the reset button to factory setting Re-connection

4

| Alarm Picture without Persons| It takes time for camera to wake up, or people move too fast Some objects around 36℃ move around
5| Frequent Alarm| Camera is trigger frequently. Suggest to adjust the installation angle Adjust the camera alarm sensitivity to “Low”
6| Why is someone Crossing without Alarm| Make sure motion detection is turned on Beyound the range of PIR monitoring area
7| No Alarm Push| Make sure Notiﬁcation is turned on from CloudEdge and phone
8| No Alarm Video| Make sure Micro SD card inserted / Cloud Storage activated
9| Device Ofﬂine| Check the camera if power off Make sure network is normal
10| Video Delay| Make sure network is normal
11| Battery Durability| Reduce Motion detection triggered / Two-Way Talk / Live Feed
12| Unable to Charge| Charge at least 8-16 hours with a 5V 1A/2A phone charger correctly LED turns to be red means your camera is charging correctly
Make sure USB power cable and the phone charger both work well
13| CloudEdge APP Flashback| Phone system version is too low or too high
14| Unable to Register Account| Make sure to select correct country
15| Unable to Add Friend| Your account and friend’s account must be in the same country. For example, accounts in Europe and America cannot share with each other

Please Email us for Better Solution
instead of returning any unqualified product to Amazon
gx1c@zumimall.com

THANK YOU