TECHKO SG-806 Solar Spotlight User Manual
- June 13, 2024
- TECHKO
Table of Contents
Solar Spotlight
USER MANUAL
Model: SG-806
HOW THE SOLAR POWERED LIGHT WORKS
In the daytime the light will automatically turn off and begin to charge the
battery. The solar panel has a photosensor to detect light. At night, the
light automatically turns on using the power stored (you also can cover the
solar panel with your hand to simulate night made.)
WARNING & NOTICE
- Do not look directly at the LED light, or it may damage your eyes.
- Do not attempt to disassemble or remodel the product. Any changes can be dangerous and will void the warranty.
- Keep the product away from flammable items,or explosion or injuries may occur.
- Switch OFF the product when it is not in use for a long period of time.
PRODUCT SPECIFICATION
| Material | ABS / Resin | Solar Panel | 4.52 X 2.95 inches / 1.5W |
|---|---|---|---|
| Solar Box Size | 4.72’3.15’8.46 inches | Waterproof Performance | ip65 |
| Spot Light Size | 3.78’2.36’8.03 inches | Accessories | 1*Solar Box |
1Spot Light
1Unit
1User manual
Unit Size| 7.06.0*15.0 inches
♦ Keep the manual with you for reference as needed.
PLEASE FULLY CHARGE THE PRODUCT BEFORE USING
- Remove the protective film over the solar panel before use.
- Do not charge the solar light indoors or any place where direct sunlight cannot reach the solar panel. Otherwise, the product will not charge properly.
- Charging time may vary depending on weather, temperature, and seasons.
- Please keep the solar panel clean to make sure the product can properly charge.
- Frequently clean solar panel as needed. Avoid scratching on the panel or it may lower charging efficiency.
- Ensure that the soil where the spike is to be placed is soft enough to insert to prevent any damage to the spike/pole when installing.
- This can be done by adding water to the sail to help soften the installation site or gently breaking up soil with a tool before installation.
How to Operate
- Adjust the solar panel and light using the adjustable knobs for optimal positioning.
- Connect Contact-01 to Contact-02. Secure the cover from Contact-01 by twisting the cover onto Contact-02.
- Slide the ON/OFF switch located behind the solar panel to the left to turn the unit to the ON position.
- Slide the ON/OFF switch located behind the solar panel to the right to turn the unit to the OFF position.
- Adjust the distance between of unit and spot light. (approximate 40 inches), to shine the unit.
This product has a 1-year limited warranty. For further information, please visit our website at www.techkogroup.com
Copyright Reserved
1-888-883-2456 hts
support@techkogroup.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>