GENESIS KAILH Thor 404 TKL Keyboard Installation Guide
- June 13, 2024
- Genesis
Table of Contents
THOR 404TKL
QUICK INSTALLATION GUIDE
KAILH Thor 404 TKL Keyboard
PRODUCT & SUPPORT
INFORMATION | PLEASE SCAN QRCODE
DOWNLOAD SOFTWARE
ON OUR WEBSITEwww.genesis-zone.com/support
FROM NOW ON, YOU ARE PART OF GENESIS HISTORY TOO!
Starting our adventure with Genesis, we knew very well, that creating hardware
for gamers is a big responsibility.
As enthusiasts of virtual gaming, from the very beginning, we wanted to create
devices that would meet the expectations not only of ourselves but all fans of
gaming around the world.
Each of the suggestions, comments, and feedback we constantly receive from you
– our engaged community – has contributed to the development of many products.
The best proof of it is the keyboard that is just resting in your hands –
Genesis Thor 404 TKL, in the development of which a key role was taken by the
community of enthusiasts gathered around „EnvyTech”.
We hope that it will deliver you many hours of fun and help you to break your
own limits in gaming passion, which connects all of us.
PRODUCT INFORMATION
PACKAGE CONTENT
REQUIREMENTS
PC or compatible device with a USB port
INSTALLATION
- Connect the cable to a free USB port on your computer, it is necessary to wait about 15 seconds for the first connection until the drivers are fully installed.
- The keyboard includes software that allows you to set up advanced features, if you want to use these features, you need to download and install the software from our website www.genesis-zone.com
- Open the installation folder and then double-click the setup.exe file.
- Follow the instruction to install the program.
- After a successful installation, the software icon appears on the main bottom panel. Double-clicking the icon opens the settings interface.
-
REPLACING SWITCHES
• Remove the keycap by pulling up vertically
• Install a metal clamp under the switch body in place showed on the figure
• Push the clamp arms to the switch body and simultaneously pull up vertically
• Insert vertically replacement switch into the holes on the PCB board and gently push down
• Insert the keycap and connect the keyboard to the computer
Note: If the switch does not work after replacement, check if the legs of switch are installed correctly in the holes on the PCB board or have not been bent. -
DIRECTION OF BACKLIGHT EFFECTS
Press the keys Fn + End to change direction of backlight effects. -
BACKLIGHT BRIGHTNESS
To change the backlight brightness level press keys Fn + Arrow Up/Down. -
SPEED OF BACKLIGHT EFFECTS
To change the speed of backlight effects, press keys Fn + Arrow Left/Right -
BACKLIGHT COLOR CHANGE
To change the backlight color, press keys Fn + Del -
BACKLIGHT MODE CHANGE
Press the keys Fn + Home to change between 18 backlight modes. -
STATIC BACKLIGHT MODE
Press the keys Fn + Ins to activate static backlight mode. -
GAME BACKLIGHT MODE
Press the keys Fn + 8/9/0 to change between 3 game backlight modes. -
CUSTOM BACKLIGHT MODE
Custom mode allows to set the individual illumination of each key.
• Select 1 of 2 available custom modes by pressing Fn + -/=
• Press Fn + Backspace to start recording. Led indicator will start flashing
• Press any keys you want to backlight (for each key you can choose 1 of 8 predefined colors by pressing same key in loop)
• Press Fn + Backspace to finish recording and save settings. Led indicator will stop flashing
Note: During recording you can adjust brightness of illumination by pressing Fn + Arrow Up/Down. -
RESTORE FACTORY SETTINGS
All saved settings can be easy restored to default settings by pressing the keys [FN+ESC].
To restore factory settings, hold the keys [FN+ESC] for 5 seconds.
EU Declaration of Conformity – Hereby, IMPAKT S.A. declares that that
the equipment type NKG-2069, NKG-2070, NKG-2071, NKG-2072 are in compliance
with Directives 2014/30/EU, 2011/65/EU and 2015/863/EU. The full text of the
EU declaration of conformity is available via the product tab at www.genesis-
zone.com.
The WEEE symbol (the crossed-out wheeled bin) usage indicates that this
product is not a household waste. Appropriate waste management aids in
avoiding consequences, which are harmful for people and environment and result
from dangerous materials used in the device, as well as, improper storage and
processing of such equipment. Segregated household waste collection allows
recycling of materials and components of which the device was made of. In
order to get detailed information about recycling of this particular product,
please contact your retailer or a local authority.
The safe product, conforming to the UKCA requirements.
SAFETY INFORMATION
- Use as intended, improper usage may break the device.
- Non-authorized repairs or disassembly voids the warranty and may damage the product.
- Dropping or hitting the device may lead to device being damaged, scratched or flawed in other way.
- Do not use the product in low and high temperatures, strong magnetic fields and damp or dusty surroundings.
GENERAL
- The safe product, conforming to the EU requirements.
- The product is made in accordance with RoHS European standard.
- 2 years limited manufacturer warranty
WWW.GENESIS-ZONE.COM
© GENESIS. All rights reserved. GENESIS name and logo, and all related product
and service names,
design marks and slogans are the trademarks or registered trademarks of
GENESIS.
All other product and service marks contained herein
are the trademarks of their respective owners. | V.2360
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>