NEWSTAR BEAMER-C100 Projector Mount Instruction Manual
- June 13, 2024
- NEWSTAR
Table of Contents
NEWSTAR BEAMER-C100 Projector Mount
Product Information
- Product Name: BEAMER-C100
- Product Type: Projector mount
- Maximum Weight Capacity: 15 kg
- Adjustable Length: 58-83 cm
Product Usage Instructions:
- Step 1: – Gather the following components: – A(x1) – B(x1) – C(x1) – D(x1) – M-A(x4) – M-B(x4) – M-C(x4) – M-D(x4) – M-E(x4) – M-F(x4) – M-G(x4) – M-H(x4) – M-I(x1) – M-J(x1) – M-K(x2) – M-L(x2) – M-M(x2) – M-N(x5) – M-O(x5) – M-P(x4) – M-Q(x4) – M-R(x4)
- Step 2: – Assemble the mounting plate with the rod according to the following diagram: – Refer to NL, EN, DE, IT, FR, ES, PT, PL for language-specific instructions.
- Step 3: – Follow the instructions provided in your language (NL, EN, DE, IT, FR, ES, PT, PL) to install the mounting plate on a concrete or wooden ceiling or wall.
- Step 4: – Refer to NL, EN, DE, IT, FR, ES, PT, PL for language-specific instructions on connecting the cable and mounting the projector to the rod.
- Step 5: – Follow the instructions provided in your language (NL, EN, DE, IT, FR, ES, PT, PL) to complete the installation process.
Note: Please refer to the complete user manual for detailed instructions and additional information.
Safety Instruction
Caution
- The manufacture steal not do trigamy responsible for any equipment damage or personalizing used by more installing or prefecture than that covered in this manual.
- The mount is designed for easy installation and removal.
- The manufacturer shall not be liable for damage to equipment or personnel injuries arising out of human factors or acts of God, such as earthquake or typhoon.
- It is recommended that the Wall mount bracket be installed by qualified personnel only
- At least two persons are needed to install or remove the product to avoid hazard of falling objects.
- Please carefully inspect the area where the wall mount is to be installed:
- Avoid places that are subject to high temperatures, humidity or contact with water.
- Do not install the product near air conditioning vents or areas with excess dust and fumes.
- Only install on vertical walls and avoid slanted surfaces.
- Do not install in places subject to any shock or vibration.
- Do not install in places subject to direct exposure to bright light, at it may cause eye fatigue when viewing the display panel.
- Maintain sufficient space around the display to ensure adequate ventilation.
- To ensure safe installation, first check the structure of the wall and select a secure mounting location,
- The wall should be strong enough to sustain a weight of at least four times of the display and Wall mount bracket combined. The mounting locations be able to withstand earthquake or other strong shock.
- Do not modify any accessories or use broken parts. Contact your dealer with any questions.
- Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
- Drill holes and bolts will be left in the wall once the display and Wall mount bracket are removed. Stains may occur after extended use. ruse. body of the wall mount The warranty Marinda of the productid & varec
- Since the manufacturer has no way to control the wall type and installation of wall mount, the warranty of the product shall only cover the body of the wall mount. The warranty period of the product is 5 years.
- Please consult the English language manual for any dispute on conditions.
Hardware
Assembly Instruction
-
Step 1
Install the extension brackets
-
Step 2
Install the bracket to the projector
-
Step 3
Assemble the mounting plate with lower and upper rod
-
Step 4
Install the mounting plate to a solid stone, concrete or wooden ceiling or wall
-
Step 5
Connect the cable and mount the projector to the rod
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>