NEWSTAR NM-D135SILVER Flat Screen Desk Mount Instruction Manual

NEWSTAR NM-D135SILVER Flat Screen Desk Mount

**Product Usage Instructions

**

To use the NM-D135SILVER, please follow the steps below:

1. Mounting the Desk Clamp
   Take the desk clamp and attach it to the rod provided.
   Ensure that the clamp is securely attached to the rod.

2. Installing the Clamp to the Desk
   Position the desk clamp at the desired location on your desk.
   Make sure the surface of your desk is clean and dry.
   Place the clamp on the desk and align it with the mounting holes.
   Use a screwdriver or appropriate tool to fasten the clamp securely to the desk.

3. VESA Mounting
   Check the VESA mounting pattern of your monitor.
   Ensure that it matches the VESA pattern specified for this product (75×75/100×100 mm)
   If they match, proceed to attach your monitor to the VESA mountusing the appropriate screws.
   If they do not match, you may need to use an adapter plate (not included) to match the patterns.

4. Adjusting the Position
   Once your monitor is securely attached to the VESA mount, you can adjust its position.
   Use the adjustable features of your monitor stand to tilt, swivel, or rotate your monitor as desired.
   Make sure to tighten any adjustment knobs or screws after positioning your monitor.

Safety Instructions

1. To ensure safety, please read this manual carefully before installation and follow the instructions. Store this manual in a secure place for future reference.
2. The manufacturer shall not be legally responsible for any equipment damage or personal injury caused by incorrect installation or operation other than that covered in this manual.
3. The mount is designed for easy installation and removal. The manufacturer shall not be liable for damage to equipment or personnel injuries arising out of human factors or acts of God, such
4. It is recommended that the Wall mount bracket be installed by qualified personnel only
5. At least two persons are needed to install or remove the product to avoid hazard of falling objects.
6. Please carefully inspect the area where the wall mount is to be installed: – Avoid places that are subject to high temperatures, humidity or contact with water. – Do not install the product near air conditioning vents or areas with excess dust and fumes.
   • Only install on vertical walls and avoid slanted surfaces.
   • Do not install in places subject to any shock or vibration.
   • Do not install in places subject to direct exposure to bright light, at it may cause eye fatigue when viewing the display panel.
7. Maintain sufficient space around the display to ensure adequate ventilation.
8. To ensure safe installation, first check the structure of the wall and select a secure mounting location.
9. The wall should be strong enough to sustain a weight of at least four times of the display and Wall mount bracket combined. The mounting locationmust be able to withstand earthquake or o
10. Do not modify any accessories or use broken parts. Contact your dealer with any questions.
11. Tighten all screws (do not exert excessive force to avoid breaking the screw or damaging its thread).
12. Drill holes and bolts will be left in the wall once the display and Wall mount bracket are removed. Stains may occur after extended use.
13. Since the manufacturer has no way to control the wall type and installation of wall mount, the warranty of the product shall only cover the body of the wall mount. The warranty period of the
14. Please consult the English language manual for any dispute on conditions.

Dimension

PARTS

Assembly

• Mount the desk clamp to the rod and install the clamp to the desk

• Mount the desk grommet to the rod and install the grommet through the desk

• Attach the arm to the rod

• Install the monitor

• Adjust the torque

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>