RUNOLIM WH301A Wireless Headphones User Manual

June 13, 2024
RUNOLIM

WH301A Wireless Headphones
User Manual
Model : WH301A
Wireless Headphones

Diagram

RUNOLIM WH301A Wireless Headphones - Diagram

1. Volume + button/ next song 5.3.5mm audio port
2. Multi-function button 6.Bluetooth/Power LED Indicator
 3.Volume- button / previous song 7.Type-C charging port
4.ANC Button / Transparency button 8.Microphone
5.ANC switch indicator 9.Noise reduction hole

Package List

  • Wireless Headphones ×1
  • 3.5mm Audio Cable ×1
  • User Manual ×1
  • Charging Cable ×1

RUNOLIM WH301A Wireless Headphones - Package List

Specification

Model No WH301A
Wireless Version V 5.3
Wireless Profile HFPN A2DPN AVRCP
Working Range 33ft (10m)
Battery 3.7V/ 500mAh
Charging Voltage 5V—1A
Charging Time 2.5 Hours
Music 65 Hours(ANC OFF)

40 Hours(ANC ON)

How to Pair

RUNOLIM WH301A Wireless Headphones - PairRUNOLIM
WH301A Wireless Headphones - headset

When the headset is power off, press and hold the Multi-function Button until the indicator flashes blue and red alternately to enter the pairing mode. Turn on the Bluetooth of the mobile phone and find “WH301A” to connect.

Play/Pause/Answer/Hang up/Reject/Redial

RUNOLIM WH301A Wireless Headphones - Play

ANC Button Instructions:

  1. Both ANC mode & Transparency mode can only be activated when the headphone is powered on.
  2. When headphone is powered on, the ANC function(noisecanceling) is started by default, click ANC button to switch to the Transparency mode( Amplify the sound of the external environment),Click again to turn off the ANC and ANC indicator turns off

RUNOLIM WH301A Wireless Headphones - default

Volume Control/Music Control

RUNOLIM WH301A Wireless Headphones - Control Clear Paired Device

Charge the Headphones

RUNOLIM WH301A Wireless Headphones - Headphones

Q: Couldn't connect?

Q: How to connect to 2 devices simultaneously?

k 1. Pair with your first device 2Turn off the bluetooth of the first device, pair with the second device 3.Turn on the bluetooth of the first device to connect again 4. Now your headset is connected to the 2 devices at the same time.

Q: What type of device is compatible?

A: This headsets are compatible with all devices that support Bluetooth or 3.5 mm plug cables. A wireless Transmitter (NOT Included) needs to be prepared when connected with a non-Wireless enabled TV/PC.

FCC STATEMENT:

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:

  1. This device may not cause harmful interference,
  2. This device must accept any interference received,including interference that may cause undesired operation.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

NOTICE :
Note: This equipment has been tested and found to comply with these limits fora Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver.
  3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  4. Consult the dealer or an experienced radio/TV technician for help.

ISEDC RSS Warning:

This device complies with Innovation, Science and Economic Development Canada Compliance licence-exempt RSS standard (s).

Operation is subject to the following two conditions:

  1. this device may not cause interference, and
  2. this device must accept any interference,including interference that may cause undesired operation of the device.

ISEDC Radiation Exposure Statement:

This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This product complies with the radio interference requirements of the European Community.

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals