RUNOLIM WH301A Wireless Headphones User Manual

June 13, 2024
RUNOLIM

RUNOLIM WH301A Wireless Headphones

Product Information

Model: WH301A
Package List:

  • Headphones
  • User Manual
  • USB Cable
  • Audio Cable

Specification:

  • Battery Life: 65 Hours (ANC OFF), 40 Hours (ANC ON)
  • Bluetooth: Yes
  • ANC (Active Noise Cancellation): Yes

Product Usage Instructions

How to Pair:

  1. Ensure that the headphones are turned off.
  2. Press and hold the power button until the LED indicator starts flashing.
  3. Enable Bluetooth on your device and search for available devices.
  4. Select “WH301A” from the list of available devices.
  5. The headphones will be paired and connected to your device.

ANC Button Instructions:

  • To turn on ANC, press the ANC button once. The LED indicator will turn on.
  • To turn off ANC, press the ANC button again. The LED indicator will turn off.

Volume Control/Music Control:

  • To adjust the volume, use the volume buttons on the headphones.
  • To control music playback (play/pause/answer/hang up/reject/redial), use the corresponding buttons on the headphones.

Clear Paired Device:

  1. Ensure that the headphones are turned off.
  2. Press and hold the power button and ANC button simultaneously for 5 seconds.
  3. The headphones will be cleared of any paired devices.

Charging the Headphones:

  1. Connect the USB cable to a power source (e.g. computer, USB charger).
  2. Connect the other end of the USB cable to the headphones.
  3. The LED indicator will turn red to indicate charging.
  4. Once fully charged, the LED indicator will turn off.

Note: This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
For more information: Please refer to the user manual included in the package list.

Diagram

  1. Volume + button/ next song
  2. Multi-function button
  3. Volume- button / previous song
  4. ANC Button / Transparency button
  5. ANC switch indicator
  6. 3.5mm audio port
  7. Bluetooth/Power LED Indicator
  8. Type-C charging port
  9. Microphone
  10. Noise reduction hole

Package List

  • Wireless Headphones x 1
  • 3.5mm Audio Cable X 1
  • User Manual X 1
  • Charging Cable X 1

Specification

How to Pair

When the headset is power off, press and hold the Multi-function Button until the indicator flashes blue and red alternately to enter the pairing mode. Turn on the Bluetooth of the mobile phone and find “WH301A” to connect.

Play/Pause/Answer/Hang up/Reject/Redial

ANC Button Instructions

  1. Both ANC mode and transparency mode can only be activated when the headphone is powered on.
  2. When the headphone is powered on, the ANC function(noise canceling) is started by default, click the ANC button to switch to the Transparency mode( Amplify the sound of the external environment), Click again to turn off the ANC and the ANC indicator turns off

Volume Control/Music Control

Clear Paired Device

Charge the Headphones

  • Q: Couldn’t connect?
    A: Press and hold the “circle button” for 10 seconds while the headphones are turned off, then search for bluetooth devices to connect the headphones.

  • Q: How to connect to 2 devices simultaneously?

    1. A: Pair with your first device
    2. Turn off the bluetooth of the first device, pair it with the second device
    3. Turn on the bluetooth of the first device to connect again
    4. Now your headset is connected to the 2 devices at the same time.
  • Q: What type of device is compatible?
    A: These headsets are compatible with all devices that support Bluetooth or 3.5 mm plug cables. A wireless Transmitter (NOT Included) needs to be prepared when connected with a non-wireless enabled TV/PC.

FCC STATEMENT

Any changes or medications not expressly approved by the path,’ responsible for compliance could void the user’s authority to operate This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

  1. This device may not cause harmful interference,
  2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

NOTICE : This equipment has been tested and found to comply with these limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • increase the separation between the equipment and the receiver.
  • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radi0/TV technician for help.

ISEDC RSS Warning:

This device complies with Innovation, Science and Economic Development Canada Compliance license-exempt RSS standard (s). Operation is subject to the following two conditions:

  1. this device may not cause interference, and
  2. this device must accept any interference, including interference that may cause undesired operation of the device.

ISEDC Radiation Exposure Statement: This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This product complies with the radio interference requirements of the European Community.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals