BERIBES WH305B Wireless Headphones User Manual
- June 13, 2024
- BERIBES
Table of Contents
BERIBES WH305B Wireless Headphones
Diagram
- Volume+ button/ next song
- Multi-function button
- Volume- button/ previous song
- ANC / Transparency button
- Talking microphone
- ANC microphone
- 3.5mm audio port
- ANC switch indicator
- Type-C charging port
- Power on LED indicator
Package List
- Wireless Headphones x 1
- 3.5mm Audio Cable Xl
- User Manual x 1
- Charging Cable X 1
Specification
Model No | WH305B |
---|---|
Wireless Version | V5.3 |
Wireless Profile | HFP , A2DP,AVRCP |
Working Range | 33ft (! Om ) |
Battery Capacity | 3.7V/ 660m Ah |
Changing Voltage | 5V===1 A |
Charging Time | 2.5 Hours |
Music | 65 Hours (ANC OFF) |
40 Hours (ANC ON)
How to Pair
Step 1:
Step 2:
When the headset is power off, press and hold the Multi-function Button until the indicator flashes blue and red alternately to enter the pairing mode. Turn on the Bluetooth of the mobile phone and find “WH305B” to connect.
Play/Pause/Answer/Hang up/Reject/Redial
ANC Button Instructions
- Both ANC mode & Transparency mode can only be activated when the headphone is powered on.
- When headphone is powered on, the ANC function(noise canceling) is started by default, click ANC button to switch to the Transparency mode( Amplify the sound of the external environment),Click again to turn off the ANC and ANC indicator turns off
Volume Control/Music Control
Clear Paired Device
Charge the Headphones
Q: Couldn’t connect?
A: Press and hold the “circle button” for 10 seconds while the headphones
are turned off, then search bluetooth devices to connect the headphones.
Q: How to connect to 2 devices simultaneously?
A: 1. Pair with your first device
2.Turn off the bluetooth of the first device, pair with the second device
3.Turn on the bluetooth of the first device to connect again
4. Now your headset is connected to the 2 devices at the same time.
Q: What type of device is compatible?
A: This headsets are compatible with all devices that support Bluetooth
or 3.5 mm plug cables. A wireless Transmitter (NOT Included) needs to be
prepared when connected with a non-Wireless enabled TV/PC.
FCC STATEMENT
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference,
- This device must accept any interference received,including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
NOTICE:
Note: This equipment has been tested and found to comply with these limits for a Class B digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Innovation, Science and Economic Development Canada Compliance licence-exempt RSS standard (s).
ISEDC RSS Warning:
Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference,including interference that may cause undesired operation of the device.
ISEDC Radiation Exposure Statement:
This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This product complies with the radio interference requirements of the European Community.
This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.
point de collecte sur www.quefariedemesdechets.fr
point de collecte sur www.quefariedemesdechets.fr