DIGINET MMBP LED Smart Load Bypass Device Installation Guide
- June 13, 2024
- Diginet
Table of Contents
DIGINET MMBP LED Smart Load Bypass Device Installation Guide
Introduction
The Diginet Load Bypass Device is designed to provide improved dimming performance of some LED’s and CFL’s when used in conjunction with Diginet 2-wire dimmer/timer/switch products. The device overcomes the following issues seen when controlling some LED or CFL light sources:
- When switched off, the LED/CFL lights flicker, pulse on/off or do not switch off completely
- When switching on, the LED/CFL lights have difficulty turning on and the dimmer indicators flicker or pulse
This product must be installed by a suitably qualified installer in
accordance with standard safety procedures for mains-powered electrical
equipment.
For more detailed information on the use of this product please see the datasheet on the Diginet web site. www.diginet.net.au
Installation
The Load Bypass Device is installed in parallel with the load, across the switched Active and Neutral, as shown in the diagram below.
Before Load Bypass Device Installation
After Load Bypass Device Installation
Specifications
| Operating Voltage | 220-240Vac 50Hz |
|---|---|
| Power Dissipation | 100mW (Note: The device power dissipation is |
independent of the connected lighting load power)
Max Ambient Temperature| tamax = 70°C
Operating Humidity| 10% – 95% RH, non-condensing
Standards Compliance| AS/NZS CISPR15:2011 AS/NZS 61347-2-11:2003 IEC
61347-2-11
Dimensions| 49mm x 15mm x 11mm
Connection Lead Type| Two core, double insulated, crimped ends Switched Active
and Neutral connections
Connection Lead Length| 300mm
© Copyright Gerard Lighting Pty Ltd
The identified trademarks and copyrights are the property of Gerard Lighting Pty Ltd unless otherwise noted.
Printed on recycled paper
Product of Gerard Lighting Pty Ltd
ABN 89 095 788 864
96-112 Gow Street
Padstow NSW 2211
Diginet is a brand of Gerard Lighting Pty Ltd
Contact
General Enqu: 1300 95 DALI (3254) or
sales@diginet.net.au
Technical Services: 1300 95 3244 or
support@diginet.net.au
Fax: 1300 95 3257
Issue 1 June 2016 14-14-031A-01-01
Item Number: MMBP
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>