NUKIi 011.318 Smart Lock Installation Guide

June 13, 2024
NUKIi

SMART LOCK 3.0
Pro
Welcome home.
Article Type: 011.318
Article Type: 070.120

011.318 Smart Lock

NUKIi 011.318 Smart Lock - Fig 1

Adapter available free of charge at www.nuki.io/adapter
Knob cylinder adapter not included

Installation Guide

www.nuki.io
Version number: 011.318-070.120-D01
Date: 01/2021

Installation

NUKIi 011.318 Smart Lock - Fig 3

Indoor use only

NUKIi 011.318 Smart Lock - Fig 4

Uninstallation

NUKIi 011.318 Smart Lock - Fig 5

Charging process

NUKIi 011.318 Smart Lock - Fig 6

LED Status

Charging process active
(flashing slowly: 1s)
Charging process complete
Please note that the charging process on USB connection does not start when the battery level is already greater than 75%.
Error: possible short-circuit
Error: loose connection / contact fault
(flashing quickly: 0.25s)

Permanent Charging

NUKIi 011.318 Smart Lock - Fig 7

Imprint:
Nuki Home Solutions GmbH
Münzgrabenstraße 92/4 – 8010 Graz

Product description

The Nuki Smart Lock 3.0 Pro motorizes existing door locks and creates a digital access system when combined with a smartphone.
The electronic door lock is placed on the inside of the door on the existing cylinder with the key inserted. The key is turned by the Nuki Smart Lock 3.0 Pro motor, but can also be turned manually using the knob. The integrated Wi- Fi module can also establish a connection between the Smart Lock 3.0 Pro and other Nuki actuators via the internet. This means Nuki locking  systems can also be accessed online and/or a connection to other Smart Home products can be established.

The Nuki Power Pack is a rechargeable battery pack for the Nuki Smart Lock. The Nuki Power Pack is charged via a 5 V USB type C connection. The Power Pack can also remain permanently connected to the USB power supply and be recharged this way.

Proper use
We recommend only mounting the Nuki Smart Lock 3.0 Pro onto lock cylinders with an emergency function. If the key is inserted from the inside, these can also be locked and unlocked from the outside using another key.
Operating temperature: 10–40°C, maximum humidity 95%, non-condensing. The device is only suitable for use in dry interior spaces and must not be installed on fire doors, escape doors or other doors with special requirements for door lock drives.
The Wi-Fi connection may fail due to technical malfunctions, meaning control functions may be temporarily unavailable while you’re on the move. Any other use is deemed improper and shall result in an exclusion of warranty and liability.
Only certified 5V USB-C connections may be used when charging the Nuki Power Pack or using it with a permanent power supply. The charger technology is already included in the Nuki Power Pack.

Assembly and installation
Information on assembly can be found in the enclosed installation instructions.
To use the adhesive pad (B), the surface must be cleaned (with residue-free cleaning agents) and free of any grease.
If your surface is made of materials other than metal or similarly smooth surfaces, please contact our customer service.

Safety instructions

The following safety and hazard instructions not only serve to protect the device, they also prevent personal injury. Please read through the instructions carefully:

  • The Nuki Smart Lock 3.0 Pro may fail due to technical malfunctions and thus be unable to open the door. Always carry the key to the lock with you or leave it in an accessible place so that the door can be opened manually in the event of an error.
  • Improper use of the device might result in damage.
  • Do not expose the device to extreme heat or cold, direct sunlight, open flames or other extreme conditions.
  • Do not use a defective or deformed Power Pack!
  • Do not open the Power Pack!
  • Do not short-circuit the battery pack’s contact points!
  • Liquid can leak from defective battery cells. If battery fluid comes into contact with skin or clothing, rinse the affected area with water. If liquid gets into your eyes, immediately rinse the affected area with water and seek medical attention. Do not rub your eyes.

Protect battery packs from moisture!
Do not expose battery packs to fire!
This product and its packaging materials contain small parts which children might swallow; therefore, 0-3 store it away from children younger than 36 months of age.
This product is not a toy. Leaking or damaged batteries might cause chemical burns.

Disposal
**** Do not dispose of the device with the household rubbish! Electronic devices must be disposed of at local collection stations, in accordance with the guidelines on used electric and electronic devices.

Technical data Smart Lock 3.0 Pro
Model name: Nuki Smart Lock 3.0 Pro
Article type: 011.318
Standards: Bluetooth specification 5.0, 2.4GHz ISM band
Antenna: internal RF ceramic chip antenna
Frequency range: 2402 MHz – 2480 MHz
Max. transmission power: 10 dBm (10 mW)
Wi-Fi standards: Wi-Fi 802.11 b/g/n
Wi-Fi antenna: 2.4 GHz ceramic antenna
Wi-Fi frequency range: 2412 MHz – 2484 MHz
Wi-Fi max. transmission power: 17 dBm (50 mW)

Technical data Power Pack

Model name: Nuki Power Pack
Article type: 070.120
4 × AA NiMH accumulators
4.8 V DC | 2.5 Ah | 12 Wh

Warranty and support

Scope of warranty
Nuki Home Solutions GmbH guarantees first-time buyers and authorised distributors (hereinafter referred to as “buyers”) that the products shall remain free from any manufacturing or material defects when subjected to proven normal use for a period of 24 months from the date of purchase (“warranty period”).

Excluded from this warranty are any defects arising from:

  • Modifications and/or changes to the product that can be attributed to a party other than Nuki Home Solutions GmbH,
  • Incorrect maintenance, incorrect installation or faulty repairs by a party other than Nuki Home Solutions GmbH,
  • Improper use,
  • Misuse, mechanical damage, overvoltage, negligence or accidents,
  • Normal wear and tear.

For more information on the warranty, please visit: nuki.io/warranty

Applicable law
This warranty shall be governed by the law of the Republic of Austria. The place of jurisdiction shall be Graz, Austria.

Contact information
E-Mail: service@nuki.io
You can find other ways to contact the Nuki support team at: nuki.io/help

Keep these instructions as well as the operating instructions for later use!
Nuki Home Solutions GmbH hereby declares that the radio equipment type Nuki Smart Lock 3.0 Pro (011.318) complies with the Directive 2014/53/EU.

The full text of the EU Declaration of Conformity is available at the following link: nuki.io/legal

Let’s get started.

NUKIi 011.318 Smart Lock - Symbol 8

www.nuki.io/start

NUKIi 011.318 Smart Lock - Qr code

Article 220654
Version number: 011.318-070.120-D01
Date: 01/2021

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals