HILTI CFS-T Cable Transit System Instructions

: June 13, 2024
: HILTI

Table of Contents

HILTI CFS-T Cable Transit System
Product Information
Product Usage Instructions
Tools
Dimensions
Transit System CFS-T
Removal of wedge to add/remove cables CFS-T
Plug Seal CFS-T RR/RRS with SL/SLF sleeves
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

HILTI CFS-T Cable Transit System

HILTI-CFS-T-Cable-Transit-System-product-image

Product Information

Product Name	Hilti Cable Transit System
Model Numbers	CFS-T / CFS-T EX, CFS-T FB / CFS-T FB EX, CFS-T PUL, CFS-T

RR/RRS
Sizes Available| 60mm, 120mm, 180mm, 240mm, 15mm, 20mm, 30mm, 40mm, 90mm
Certifications| EN 60079-0:2018, EN 60079-7:2015+A1:2018, EN 60079-31:2014, IEC
60079-0:2017, IEC 60079-7:2017, IEC 60079-31:2013

Product Usage Instructions

Before installation, read the Hilti instructions for use and the safety data sheet.
Observe the approval and follow the regulations for industrial use only.
For adding or removing cables, follow the steps below:
Remove the wedge.
Add or remove the cables.
Insert the wedge back into place.
For using the Plug Seal CFS-T RR/RRS with SL/SLF sleeves, follow the steps below:
Attach Plug Seal CFS-T RR/RRS with SL/SLF sleeves.
Follow the instructions provided for further steps.
Ensure that the minimum cable diameter is 3mm and the maximum cable diameter is 99mm.
For lubrication, use CFS-T LUB.
Apply 6 Nm torque for CFS-T LUB.
Follow the instructions provided for further steps.
Marking label (identification sticker) must be affixed adjacent to the Ex Component by the installer according to Hilti type of frame and size.

Tools

$HILTI-CFS-T-Cable-Transit-System-01 $1$$

EN 60079-0: 2018
EN 60079-7: 2015+A1: 2018
EN 60079-31: 2014
IEC 60079-0: 2017
IEC 60079-7: 2017
IEC 60079-31: 2013

Dimensions

$HILTI-CFS-T-Cable-Transit-System-01 $4$$

Transit System CFS-T

$HILTI-CFS-T-Cable-Transit-System-01 $5$$ $HILTI- CFS-T-Cable-Transit-System-01 $6$$

Removal of wedge to add/remove cables CFS-T

$HILTI-CFS-T-Cable-Transit-System-01 $7$$

Plug Seal CFS-T RR/RRS with SL/SLF sleeves

$HILTI-CFS-T-Cable-Transit-System-01 $8$$ $HILTI- CFS-T-Cable-Transit-System-01 $9$$

Hilti Cable Transit Device-XX #xxxxxxx

II 2G Ex eb IIC Gb / II 2D Ex tb IIIC Db
Cert. numbers: IECEx DNV 22.0026U / DNV 21 ATEX 16551U
Sizes : XXX-X XX XX XXX-X XX XXX XXX-X XX XXX XXX-X XX XX XXX-X XX XXX XXX-X X X XX XXX-X XX XXX
Temp. range: -20°C to +75°C
IP 66 / Notified body number: 2460
WARNING – POTENTIAL ELECTROSTATIC –

CHARGING HAZARD SEE INSTRUCTIONS

Please note, marking label (identification sticker) is valid for subjected Hilti Cable Transit System with issued DoC only.

Marking label (identification sticker) shall be affixed adjacent to the Ex Component by the installer according Hilti type of frame and size. Please note, marking label (identification sticker) is valid for subjected Hilti Cable Transit System with issued DoC only.

Note: The Hilti instructions for use and the safety data sheet must be read before installation. The approval must be observed. For industrial use only.

Hilti (Gt. Britain) Ltd., 1 Trafford Wharf Road, Trafford Park, GB-M17 1BY Manchester,

Tel.: 0800 886 100, www.hilti.co.uk
Hilti Ireland, Unit C4, North City Business Park, Finglas, Dublin 11,
Tel.: 1850 287 387, www.hilti.ie
Hilti Deutschland AG, Hiltistr. 2, DE-86916 Kaufering,
Tel.: 0800 888 55 22, www.hilti.de
Hilti Austria Gesellschaft m.b.H., Altmannsdorfer Strasse 165, Postfach 316, AT-1230 Wien,
Tel.: 0800 81 81 00, www.hilti.at
Hilti (Schweiz) AG, Soodstrasse 61,
CH-8134 Adliswil, Tel.: 0844 84 84 85, www.hilti.ch