HILTI S-BT-MF M8 Threaded Studs and Standoffs Instructions
- June 13, 2024
- HILTI
Table of Contents
HILTI S-BT-MF M8 Threaded Studs and Standoffs
Product Information
- Product Name: Threaded Studs
- Manufacturer: Hilti Corporation
- Model: S-BT-MF M8/M10/W10 AN 6 HL
- Coating: Corrosion coated resistance
- Tested: C3 Tested
- Maximum Distance: >1km
Product Usage Instructions
- Ensure that the threaded studs are suitable for connecting materials to structural steel and aluminum members.
- Select the appropriate size of the threaded stud based on your requirements. Available sizes include:
- S-BT-MF M8/15 AN 6 HL
- S-BT-MF M10/15 AN 6 HL
- S-BT-MF W10/15 AN 6 HL
- S-BT-MF M8/7 AN 6 HL
- S-BT-MF MT M10/15 AN 6 HL
- S-BT-MF MT W10/15 AN 6 HL
- Use the appropriate hex nut with flange for secure fastening. Available options include:
- Hex nut with flange M8-F
- Hex nut with flange M10-F
- Hex nut with flange W10-F
- For longer threaded studs, consider the following options:
- S-DG BT M8/15 Long 6
- S-DG BT M10/W10/15 Long 6
- For shorter threaded studs, consider the following option:
- S-DG BT M8/7 Short 6
- Apply a torque of 16 Nm (11.8 ft-lb) for proper tightening using a suitable tool.
- Verify the RPM requirement for the threaded studs. The recommended RPM is 2000.
- Ensure proper installation and alignment of the threaded studs.
- Refer to the manufacturer’s website for more information and technical specifications: www.hilti.group
Instructions
| SBT 4| SBT 6
SF 6
---|---|---
| TS-BT 5.3-65 S
| S-DG BT M8/15 Long 6
S-DG BT M10/W10 / 15 Long 6
S-DG BT M8/7 Short 6
| Torque Tool S-BT ¼” 16 Nm / 11.8 lb-ft
| S-NS 13 C 95/3 ¼” (M8) S-NS 15 C 95/3 ¼” (M10)
S-NS 9/16″ C 95/3 ¼” (W10)
|
S-CC BT 6
Tools
- S-BT-MF M8/15 AN 6 HL
- S-BT-MF M10/15 AN 6 HL
- S-BT-MF W10/15 AN 6 HL
- S-BT-MF M8/7 AN 6 HL
- S-BT-MF MT M10/15 AN 6 HL
- S-BT-MF MT W10/15 AN 6 HL
- Hex nut with flange M8-F
- Hex nut with flange M10-F
- Hex nut with flange W10-F
23
Hilti Corporation, Feldkircherstrasse 100, FL-9494 Schaan, Liechtenstein
Hilti-SF-DoP-045
ETA-23/0001
EAD 333037-00-0602
0672-CPR
Threaded studs for connection of materials to structural steel and aluminium
members
www.hilti.group
| **** | SBT 6 |
|---|---|
| **** | TS-BT 5.3-65 S |
| S-SH BT M8/M10/W10 | |
| Torque Tool S-BT ¼” 16 Nm / 11.8 lb-ft | |
| S-NS 13 C 95/3 ¼” (M8) S-NS 15 C 95/3 ¼” (M10) |
S-NS 9/16″ C 95/3 ¼” (W10)
|
S-IC BT
Installation
23
Hilti Corporation, Feldkircherstrasse 100, FL-9494 Schaan, Liechtenstein
Hilti-SF-DoP-045
ETA-23/0001
EAD 333037-00-0602
0672-CPR
Threaded studs for connection of materials to structural steel and aluminium
members
www.hilti.group