How to reset the current configuration to factory default？
- June 13, 2024
- TOTOLINK
Table of Contents
How to reset the current configuration to factory default？
It is suitable for: N150RA, N300R Plus, N300RA, N300RB, N300RG, N301RA, N302R Plus, N303RB, N303RBU, N303RT Plus, N500RD, N500RDG, N505RDU, N600RD, A1004, A2004NS, A5004NS, A6004NS
Application introduction: If you can’t access the router’s setup interface or simply forgot the router’s password, you may reset the current configuration to factory default. There are two ways to.
Method 1
STEP-1: Connect your computer to the router
1-1. Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.1.1 into the address bar of your browser.
Note: The default IP address of TOTOLINK router is 192.168.1.1, the default Subnet Mask is 255.255.255.0. If you can’t log in, Please restore factory settings.
1-2. Please click Setup Tool icon to enter the router’s setting interface.
1-3. Please login to the Web Setup interface (the default user name and password is admin ).
STEP-2:
Click Advanced Setup- >System->Config Backup/ Restore on the navigation bar on the left.
STEP-3:
Click Factory Default to reset the router’s configuration.
STEP-4:
Click OK and wait for few seconds to finish resetting.
Method 1
Only by one click on the RST/WPS button
STEP-1:
Press and hold the RST/WPS button for about 10 seconds, until the CPU led blink quickly.
STEP-2:
After nearly 30 seconds, resetting is finished.
DOWNLOAD
How to reset the current configuration to factory default – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>