SG Support 180mm RANSHOU Bonsai Trimming Scissors Instruction Manual

: June 13, 2024
: SG Support

Table of Contents

SG Support 180mm RANSHOU Bonsai Trimming Scissors
Product Information
Parts Introduction
Product Usage Instructions
Product introduction
Parts introduction
Care and maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SG Support 180mm RANSHOU Bonsai Trimming Scissors

Product Information

The RANSHOU Bonsai trimming scissors 180mm is a tool designed specifically for trimming bonsai and fruit trees. It is made of high-carbon steel for the blade and nylon for the handle stopper. The product is manufactured in Japan.

Caution

Do not use the scissors for materials other than wood (plastic, concrete, metal, etc.).
Do not remodel or use the scissors for anything other than their intended purpose.
Do not point the cutting edge towards people or animals.
Check the product for rattling or damage before use.
Wear safety goggles and gloves when working with the scissors.
Do not touch the cutting edge directly with bare hands.
When not in use, store the scissors with cutting-edge protection.
Keep out of reach of children.

Parts Introduction

Blade: Made of high-carbon steel.
Joint parts: Connect the blade and handle.
Spring parts: Provides tension to the blade.
Handle: Made of nylon for a comfortable grip.
Handle stopper: Prevents interference during use.

Product Usage Instructions

Ensure you have read and understood the cautionary instructions provided above.
Hold the scissors by the handle with a firm grip.
Identify the branch or foliage you wish to trim.
Position the cutting edge of the scissors carefully around the branch or foliage.
Apply gentle pressure to the handles to close the blades and make the cut.
Repeat the trimming process for other branches or foliage as desired.
After use, wipe off any dirt or debris from the scissors using a dry cloth.
To maintain the blade’s sharpness, sharpen it with a whetstone by following the provided video instructions. Remember to lightly sharpen the back of the blade to remove any burrs.
After sharpening, wipe the blade with a cloth soaked in cutting oil to prevent rusting.
Store the scissors in a dry place to avoid rusting.

If you have any further questions or concerns about the product, please contact RANSHOU’s customer support at info@sgsupport.jp or visit their website at https://www.sgsupport.jp/.

Product introduction

This product is a tool for trimming bonsai and fruit trees. Please read this manual carefully and use it properly.

CAUTION

Do not use it for materials other than wood(plastic, concrete, metal, etc.).
Do not remodel or use it for anything other than its intended purpose.
Do not point the cutting edge to people and animals.
Check the product for rattling or damage before use.
Wear safety goggles and gloves when working.
Do not touch the cutting edge directly as with bare hands.
When not using it, be sure to store it without the cutting edge out.
Keep out of reach of children.

Parts introduction

Material

Blade: High carbon steel handle stopper: nylon

CAUTION

Do not cut thick branches.
Capacity: up to 4 mm
Do not rotate the blade.

Handling of handle stopper

Turn the handle stopper outward so that it does not interfere with use.

Video

How to sharpen the
Hold the whetstone in your hand, keep it at a certain angle, and sharpen it by pushing it out in the direction of the arrow. Finally, lightly sharpen the back of the blade once or twice to remove the burr.

Care and maintenance

After use, wipe off the dirt with a dry cloth and wipe the blade with a cloth soaked with cutting oil.
Keep the blade in a dry place as it is easy to rust.

CONTACT