CR ME ATELIER 01 Soft Serve Pendant User Manual

CR ME ATELIER 01 Soft Serve Pendant

Product Information

The Soft Serve Pendant is an indoor lighting fixture designed for decorative purposes. It comes with a lamp shade, a fabric cord, a canopy with a ceiling bracket, and terminal boxes. The pendant requires an E27 bulb with a maximum wattage of 22w (bulb not included). The product is intended for indoor use only.

Safety Information
For safe and proper use of the Soft Serve Pendant, follow these instructions:

• Keep the product out of children’s reach.
• Only install the lamp for interior use.
• Do not attempt installation if you are not competent to do so. Consult a professionally qualified electrician if in doubt.
• Disconnect the electricity supply at the fuse box before commencing any installation work.

Troubleshooting
If you encounter any issues or have questions about the Soft Serve Pendant, refer to the troubleshooting section in the user manual or contact the manufacturer using the provided contact information.

Installation
Follow these steps to install the Soft Serve Pendant:

1. Ensure the power supply is turned off and remove any existing lamp fitting.
2. Securely mount the metal bracket (B) in the ceiling using screws and wall plugs suitable for your ceiling type.
3. Pass the electrical cord through the strain relief of the canopy (B) to determine the desired suspension height of the lamp. Tighten the plastic screw of the strain relief to secure the cord in place.
4. Use the terminal boxes (C) to connect the wires from the pendant to the wires from the power supply. Place the terminal boxes inside the canopy.
5. Place the canopy cup onto the metal bracket and secure it in the correct position using the included screws.

Make sure to keep all components and materials containing product information for future reference.

Cleaning Instructions
To clean the Soft Serve Pendant:

• Wipe the surface of the lamp shade with a soft, damp sponge or cloth, and immediately dry with a cloth.
• Avoid using abrasive cleaning tools such as steel wool, scouring sponges, or stiff brushes.
• Do not use strong cleaning agents like white spirit, turpentine, household glass cleaner, or cellulose thinners.
• Only wipe the inside of the shade with a soft, damp cloth or feather duster.

Refer to the user manual for additional information on maintenance and disposal of the Soft Serve Pendant.

Safety

To prevent injury or damage, read and understand these instructions before installing or using the Soft Serve Pendant. Misuse of the device can result in serious damage to property and severe injuries or worse. Instructions and other information supplied must be kept for future reference and must also be keptwith product if it is passed on to a new owner. Soft serve Pendant is only designed to be used indoors in domestic environments or environments of a seminarrative (shops and offices for example). This device should be kept away from children in order to prevent it being used as a toy.

Information & troubleshooting

For product related questions, technical assistance or ordering physical user instructions, contact Crème AB by using contact information supplied in these instructions.

Intended use

The device is only intended to be used indoors. It shall only be used with the components supplied with the Soft Serve Pendant or sold by Creme AB with Soft Serve Pendant defined in their intended use. No modification of the product is allowed, as it could make it hazardous. Crème AB is no liable for material damage or personal injury caused as a result of not following these instructions. In such cases, the warranty will be void.

Graphic symbols

For safe and proper use, follow these instructions. Keep them for future reference.
By affixing the CE marking to a product, a manufacturer declares that they are responsible that the product meets all the legal requirements for CE marking, which include requirements on health and safety. If an identification number is placed by the CE mark, it means that the corresponding notified body has performed a conformity assessment on the product.
The WEEE symbol are placed on electrical devices and equipment to clearly display that they are not to be considered and treated as unsorted waste. These products must be collected separately, the implementation of this collection varies depending on national laws.
Indicates that the product is only suited for indoor use. Uses other than intended use could be hazardous.
Indicates that the product is only suited for indoor use. Uses other than intended use could be hazardous.

Installation

When first installing the lamp, keep all components and material that includes
information for the product (within and on the packaging).

• Be careful when you stand near the power cable.
• Loose cables can create tripping hazards.
• Make sure not to damage the power cable.
• Do not use a deformed or damaged power cable.
  This lamp is not designed for looping-in. 6.

Please read these instructions carefully and retain them for future reference to ensure that the product is used correctly. For your own safety, please study each step of this instruction manual first. Crème AB is not responsible for any faults or damages caused by not following these in – structions correctly. Do not modify this product in any way.

Safety precautions

• Keep product well out of children’s reach.
• The lamp is only intended for interior use.
• Do not attempt installation of product if you are not competent to do so yourself.
• Consult a professionally qualified electrician if in any doubt.
• Disconnect the electricity supply at the fuse box, before commencing work.

Content

• A Lamp shade with 3 meter fabric cord
• B Canopy with ceiling bracket
• C Terminal boxes

Cleaning instructions

• Wipe surface of lamp shade with a soft, damp sponge or cloth, and wipe immediately with a dry cloth.
• Do not use any abrasive cleaning tools such as steel wool, scouring sponges or stiff brushes.
• Never use strong cleaning agents such as white spirit, terpentine, household glass cleaner or cellulose thinners.
• Only wipe the inside of the shade with a soft, damp cloth or feather duster.

For indoor use only
E27 Maximum 22w.
Bulb not included

• Step 1
  Ensure power supply is turned off and remove any existing lamp fitting. Mount the metal bracket (B) securely in the ceiling with screws and wall plugs, appropriate for the ceiling of installation.

• Step 2
  To determine the right suspension height for the lamp, pass the electrical cord through the strain relief of the canopy (B). When you have the desired suspension height of the lamp, tighten the plastic screw of the strain relief.

• Step 3
  Use the terminal boxes (C) to assemble the wires from the pendant with the wires from the power supply. Place the terminal boxes inside the canopy.

• Step 4
  Place the canopy cup onto the metal bracket and secure it in the right position with the including screws.

• Step 5
  Install the light bulb.

Use

• Do not use device underwater. Failure to do so can result in serious injury or death.

Maintenance

• Unplug all connections before cleaning the device.
• Do not use excess water while cleaning the device.
• Avoid getting water inside the stand.
  Only use dry cloths to clean all parts of the device. If the cable is damaged or destroyed, Crème AB or a similar qualified person must replace it. When the light source of this device is used up, sort it as waste according to national laws. Replace bulb with appropriate E27 bulb.

Disposal

Electrical equipment and packaging should not be disposed together with household waste material. Sort all waste in accordance with national laws.

Technical data

Electrical equipment and packaging should not be disposed together with household waste material. Sort all waste in accordance with national laws.

EU Compliance

Crème AB has declared that this device, when used and installed correctly, complies with the following EU directives:

• LVD (2014/35/EU)
• RoHS Directive (2011/65/EU)

The full Declaration of Conformity can be supplied at request.

Warranty

Crème AB warrants its products to be free from defects in materials and workmanship for a period of two (2) years from date of delivery.

Contact information

Crème AB, Barnängsgatan 46b, 116 48 Stockholm, Sweden.

creme-atelier.com | hello@creme- atelier.com

References

• atelier.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>