DEKRA Pulse V01 Battery Powered Wireless IOT Sensor Owner’s Manual
- June 13, 2024
- DEKRA
Table of Contents
DEKRA Pulse V01 Battery Powered Wireless IOT Sensor
Product Information
The Aloxy Pulse V01 is a battery powered wireless data collection tool. It is designed for fixed applications and is equipped with temperature and inertial sensors. The device can be programmed or configured to capture signals from its embedded sensors, perform initial pre-processing of the measured data on its] microcontroller, and wirelessly transmit the resulting data over supported communication networks. The Aloxy Pulse features two programmable pushbuttons for user-initiated event recording and multiple LED indicators for visual event feedback. The device does not have any serviceable parts except for the 3.6V battery pack, which can only be removed using a tool.
CERTIFICATE
- Issued to
- Applicant
- Alkoxy
- Sint-Pietersvliet 7
- 2000 Antwerpian, Belgium
Licensee :
Aloxy
-
Sint-Pietersvliet 7
-
2000 Antwerpian, Belgium
-
Product : Battery powered wireless IOT sensor
-
Trade name(s) : Aloxy
-
Type(s)/model(s) : Pulse V01
The product and any acceptable variation thereto is specified in the Annex to this certificate and the documents therein referred to.
DEKRA hereby declares that the above-mentioned product has been certified on the basis of
- an evaluation according to the standard(s) CAN/CSA C22.2 No. 60079-11:2014, CSA C22.2 No. 213:2017, CSA C22.2 No. 60079-0:2019, UL 60079-0:2019, UL 60079-11:2013 and UL 121201:2017
- an inspection of the factory location according to DEKRA’s North American Certification Scheme
- a DEKRA certification agreement with the number 6063326
DEKRA hereby grants the right to use the DEKRA certification mark as shown below.
The DEKRA certification mark may be applied to the product as specified in this certificate for the duration and under the conditions of the DEKRA certification agreement.
This certificate is issued on 7 December 2022 and expires upon withdrawal of one of the above mentioned standards.
Certificate number: 71-126015
SPECIFICATION OF THE CERTIFIED PRODUCT
Product data
| Product | : | Battery powered wireless IOT sensor |
|---|---|---|
| Trade name(s) | : | Aloxy |
| Type(s)/model(s) | : | Pulse V01 |
| Marking Canada | : | Class I, Zone 1, Ex ib IIC T4 Gb |
| Marking Canada / USA | : | Class I, Division 2, groups ABCD T4 |
| Marking USA | : | Class I, Zone 1, AEx ib IIC T4 Gb |
| Ambient temperature | : | -40 °C to +70 °C |
TESTS
- Test requirements
- CAN/CSA C22.2 No. 60079-11:2014 CSA C22.2 No. 213:2017
- CSA C22.2 No. 60079-0:2019
- UL 60079-0:2019
- UL 60079-11:2013
- UL 121201:2017
Test result
The test results are laid down in DEKRA test file 227024500.
Conclusion
The examination proved that all requirements were met.
Factory location
The factory location is registered with the number 298557.
ANNEX TO cDEKRAus CERTIFICATE 71-126015
Standards electrical safety
The product has been certified on the basis of an evaluation according to the
standards CSA C22.2 No. 61010-1-12 and UL 61010-1:2012.
Description
The Aloxy Pulse V01 is a battery powered wireless data collection tool. It is intended for fixed applications with temperature and inertial sensors.
Depending on the use, the Aloxy Pulse can be programmed or configured to capture signals from one of its embedded sensors, perform initial pre- processing of the measured data on its microcontroller and wirelessly transmit the resulting data over one of the supported communication networks.
Two programmable pushbuttons allow for user-initiated event recording and multiple LED’s provide visual event feedback.
The Aloxy Pulse contains no serviceable parts other than the 3.6V battery pack. The battery pack is removeable only through use of a tool.
Hazardous area Classification
The relation between the configuration, temperature class and ambient
temperature is shown below.
| Configuration | Temperature Class | Ambient temperature |
|---|---|---|
| IS for Class I, Zone 1, Group IIC | T4 | -40 °C to +70 °C |
| Class I, Division 2, Groups A-D | T4 | -40 °C to +70 °C |
The process temperature range is -40 °C to 70 °C, applicable when mounted to e.g. pipes or machines.
The enclosure has a degree of protection IP69 in accordance with ANSI/IEC 60529:2004 and CAN/CSA-C22.2 No. 60529:2016.
Electrical data
The following replaceable battery pack is allowed to be used:
ALOXY partnumber: T36851CCC
Type designation
Pulse V01, Wireless IOT Sensor
Specific Conditions of Use:
N/A
Certificate history
Project : 225774300 initial certificate
DEKRA Certification B.V. Meander 1051, 6825 MJ Arnhem P.O. Box 5185, 6802 ED
Arnhem, The Netherlands
T +31 88 96 83000 F +31 88 96 83100 www.dekra.nl
Company registration 09085396
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>