A2004NS repeater setting

A2004NS repeater setting

It is suitable for:  A1004 / A2004NS / A5004NS / A6004NS

Application introduction:  Solution about how to set repeater mode on TOTOLINK products.

STEP-1: Connect your computer to the router

1-1. Connect your computer to the router by cable or wireless, then login the router by entering http://192.168.1.1 into the address bar of your browser.

Note:The default access address differs by model. Please find it on the bottom label of the product.

1-2. Please click Setup Tool icon           to enter the router’s setting interface.

1-3. Please login to the Web Setup interface (the default user name and password is admin ).

STEP-2: Wireless(2.4GHz) repeater setting

Please go to  Advance Setup - >Wireless(2.4GHz)->Wireless Multibridge , and check which you have selected.

Select  Use Wireless Bridge and WPAPSK/WPA2PSK+TKIP/AES  in Encryption, then Click  AP Scan.

Then select the host router’s SSID and way of Encryption ,then input password of the host router’s SSID and Click  Apply.

STEP-3: Wireless(5GHz) repeater setting

Please go to Advance Setup - >Wireless(5GHz) ->Wireless Multibridge , and check which you have selected.

Select Use Wireless Bridge in Mode and WPAPSK/WPA2PSK+TKIP/AES  in Encryption, then Click  AP Scan.

Then select the  host router’s SSID and way of  Encryption  ,then input password of the  host router’s SSID  and Click Apply.

PS: After completing the above operation, please re-connect your SSID after 1 minute or so. if the Internet is available it means thatthe settings are successful. Otherwise, please re-set the settings again

DOWNLOAD

A2004NS repeater setting – [Download PDF]

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>