A3 WDS Settings
- June 13, 2024
- TOTOLINK
Table of Contents
A3 WDS Settings
It is suitable for： A3
Diagram
Preparation
● Before configuration, make sure that both A Router and B Router are powered on.
● Connect your computer to the same network of router A and B.
● move the B router closer to the A router to find the B routing signals better for fast WDS.
● A Router and Router should be set to the same channel.
● Set both Router A and B should to the same band 2.4G or 5G.
● Choose the same models for A-router and B-router. If not, WDS function may not be implemented.
Set up steps
STEP-1: Set up WDS on A-router
Enter the setup page on router A, then follow the steps below.
①In the navigation bar, select Advanced Setup -> ② Wireless -> ③ Wireless Multibridge
④For Wireless Multibrige , select 2.4GHz. If you want to use 5GHz for WDS, choose 5GHz.
⑤ In Mode list , select WDS.
⑥Click the Ap Scan button.
⑦In 2.4G Wireless Network list , select B-Router for WDS.
⑧Click the Apply button.
STEP-2: B-Router Wireless Setup
Enter the settings page of the B Router, then follow the steps illustrated.
①In the navigation bar, select Basic Setup -> ② Wireless Setup -> ③Select 2.4GHz Basic network
④Setting Network SSID, channel, Auth, password
⑤Click the Apply button
Repeat the steps 3 through 5 to complete the 5GHz Wi-Fi configuration
STEP-3: B-router WDS setting
Enter the settings page of the router B, then follow the steps illustrated.
①In the navigation bar, select Advanced Setup -> ② Wireless -> ③ Wireless Multibridge
④For Wireless Multibrige , select 2.4GHz.( You must choose the same channel as Router A.)
⑤ In Mode list , select WDS.
⑥Click the Ap Scan button
⑦ In 2.4G Wireless Network list , select A-Router for WDS
⑧click the Apply button.
STEP-4: Turn off the B-routed DHCP server
Follow the steps below to disable the DHCP function.
STEP-5: Restart B router
Follow the following steps to restart Router B. Or you can directly disconnect the router from its electrical outlet. Once Router B is rebooted, Routers A and B are connected successfully via WDS.
STEP-6: B Router position display
Move the Router B to a different location for a best Wi-Fi access.
DOWNLOAD
A3 WDS Settings – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>