A3 wireless SSID password modification settings
- June 13, 2024
- TOTOLINK
Table of Contents
A3 wireless SSID password modification settings
It is suitable for: A3
Application introduction:
Wireless signals generally refer to Wi-Fi, wireless SSID and wireless password is the wireless terminal to connect the router to the Internet the most important two information. The actual use of the process, if there is no connection on the wireless, forget the wireless password, you need to view or modify the signal SSID and password.
Set up steps
STEP-1: Enter the setup interface
Open the browser, clear the address bar, enter 192.168.0.1 , fill in the administrator account and password (default admin admin ), Enter the displayed verification code , click Login , and select Advance setup again, as follows:
STEP-2: View or modify the wireless parameters
2-1. In the Status Summary to view SSID and Password
Click Status Summary to view the SSID and password in Wireless Status (2.4GHz) and Wireless Status (5GHz). Figure, 2.4GHz signal set password, click View to View , 5GHz signal does not set the password, do not show the password.
If you are setting up the WIFI SSID and password for the first time. you need to enter the Wireless Setup interface settings, here, to 2.4GHz signal settings as an example (5GHz settings the same). You can modify the SSID according to your preferences, select the encryption method (recommended WPA2PSK + AES (Recommended) ), enter your ready Password , click Apply.
2-2. Check and modify In the Advanced Setup.
Of course, you can also click Wireless advanced setup to set more wireless parameters, as follows:
Questions and Answers
Q1: After setting up the wireless signal, need to restart the router?
A: No need. After setting the parameters, wait a few seconds for the configuration to take effect.
DOWNLOAD
A3 wireless SSID password modification settings – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>