Silabs RespShop Universal Windows Driver Installation Guide
- June 13, 2024
- silabs
Table of Contents
Silabs RespShop Universal Windows Driver
Product Information
The product mentioned in the user manual is a CPAP (Continuous Positive Airway Pressure) device. It requires drivers to be installed on a computer before it can be used with the computer.
Product Usage Instructions
- Prior to installing the driver, ensure that the CPAP device is unplugged from the computer.
- If the boxes do not become colored when plugging in the CPAP device, follow the steps below:
- Go to https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers
- On the webpage, select “downloads”.
- Download the CP210x Universal Windows Driver by clicking on it.
- Go to your downloads folder and double-click on the downloaded file.
- Click on “Extract All”.
- Leave the default folder and click “extract”.
- Locate the file called “saber” (there are 2 of them). One will have an icon of a piece of paper and gear.
- Right-click on the “saber” file with the icon and choose “Install” from the menu.
- A pop-up message will appear indicating that the operation completed successfully.
- Reset the computer.
- Open the MiniCPAP software.
- Plug in the CPAP device.
Drivers Install Instructions
- Prior to installing the driver make sure that the CPAP is unplugged from the computer
-
You will only need to do these steps if the boxes do not become colored when plugging in your
CPAP -
Go to https://www.silabs.com/developers/usb-to-uart-bridge-vcp-drivers
-
On this page, you’ll select downloads
-
Download the CP210x Universal Windows Driver by clicking on it
Leave the default folder and click extract
- Find the file called slabs, there are 2 of them. One will have an icon of a piece of paper and gear. Right-click on it and choose Install from the menu.
- You will get a pop-up that the operation was completed successfully
- Reset the computer, open the MiniCPAP software, and plug in the device
Read User Manual Online (PDF format)
Loading......