How to log into the Web page of EX300 using Mac OS
- June 13, 2024
- TOTOLINK
Table of Contents
How to log into the Web page of EX300 using Mac OS?
It is suitable for: EX300
Application introduction:
Since some Mac users got a router without WPS button, and they need to extend WiFi by EX300, what they need to do is to setup the IP address on Mac OS first.
Mac Settings
1. Search for SSID ‘TOTOLINK EX300’, click connect.
2. After connected successfully, please launch ‘System Preferences’ from the Apple menu.
3. Click on the “Network” icon.
4. In the lower right, click on the ‘Advanced’ button.
5. Choose‘TCP/IP’,in the pulldown menu next to “Configure IPv4” select “Manually”
6. Fill in the IP address: 192.168.1.100
subnet mask: 255.25.255.0
router: 192.168.1.254.
7. Click ‘OK’.
8. Click ‘Apply’.
EX300 Web Log in
Open any browser
1. Type in 192.168.1.254 in the address field of Web Browser. Then press Enter key.
2. Click Setup Tool:
3. Enter User Name and Password.Both are admin in lower case letters.
4. Click Extender Serup, choose Start to enable repeater function. Click Search AP.
5. Choose the one you would like to connect, and click Select AP.
6. If the SSID you selected is encrypted,it will pop up below window reminding you to input the network key to connect. Click OK.
7. Enter the right Encryption key to cconnect. Then click Apply.
The Status line will show you if connected successfully.
DOWNLOAD
How to log into the Web page of EX300 using Mac OS – [Download PDF]
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>