How to establish wireless connection by WPS button
- June 13, 2024
- TOTOLINK
Table of Contents
How to establish wireless connection by WPS button?
It is suitable for: EX150, EX300
Application introduction: There are two methods to extend WiFi signal by Extender, you can setup the repeater function in the web-configuration interface or by pressing the WPS button. The second one is easy and fast.
STEP-1:
1. Press the WPS button on the Router.
2. Press the RST/WPS button on the EX300 for about 2~3s (not more than 5s, it will reset the extender to factory default if you press it for more than 5s) within 2 minutes after pressing the button on the router.
Note: The “extending” LED will flash when connecting and become solid light when connection is successful. If the “extending” LED is off lastly, it means that the WPS connection is fail.
STEP-2:
When it is fail to connect to the router by the WPS button, there are two suggestions we recommend for a successful connection.
1. Place EX300 near the router and power it on, and then connect with the router by the WPS button again. When connection is finished, unplug the EX300, and then you can replace the EX300 to the desired place.
2. Try to connect to the router by setting up in the extender’s web- configuration interface, please refer to method 2 in FAQ# (How to extend existing WiFi network by the extender)
DOWNLOAD
How to establish wireless connection by WPS button – [Download PDF]