GRACO 682-3858 Pearl Bedside Sleeper Instructions

GRACO 682-3858 Pearl Bedside Sleeper

Product Information

Product Usage Instructions

To Assemble Travel Bassinet Legs

1. Flip the bassinet upside down and attach the bassinet legs as shown in images 6 – 11. Make sure the basket is not twisted.
2. Check that all four legs are assembled by pulling on them.
3. Attach three snaps on the short side of the basket by wrapping the snaps around the bar on the bassinet. Repeat on the other side.
4. Flip the bassinet over and open it.
5. If the mattress pad is not in place, insert it soft side up into the bassinet.

To Fold Travel Bassinet

1. Pull up on one of the yellow rings located on the bottom side of the bassinet.

   • Pro Tip: If you’re having trouble folding, try placing a foot on the bottom of the bassinet to help hold it in place.

2. Fold the bassinet as shown in image 13.

To Remove Travel Bassinet Legs

1. Pull up on one of the yellow rings located on the bottom side of the bassinet.
   Pro Tip: If you’re having trouble folding, try placing a foot on the bottom of the bassinet to help hold it in place.

2. Fold the bassinet as shown in image 15.

3. Disconnect three snaps on the short side of the basket by unwrapping the snaps from the bar on the bassinet. Repeat on the other side.

4. Flip the bassinet upside down and press the buttons on all four legs to remove them.

IMPORTANT! RETAIN FOR FUTURE REFERENCE. READ CAREFULLY

WARNING

• Complies to EN 1130:2019/AC:2020 and EN 16890:2017+A1:2021.
• READ THESE INSTRUCTIONS CAREFULLY BEFORE USE AND KEEP THEM FOR FUTURE REFERENCE. YOUR CHILD’S SAFETY MAY BE AFFECTED IF YOU DO NOT FOLLOW THESE INSTRUCTIONS.
• WARNING: IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
• Adult assembly is required.
• Do not use this product without reading the instructions for use first.
• Discontinue using the product when the child reaches 9kg (approximately 0-6 months) or is able to climb out.
• Stop using the product as soon as the child can sit kneel or pull himself up.
• Placing additional items in the product may cause suffocation.
• Do not place the product close to another product, which could present a danger of suffocation or strangulation, e.g. strings, blind/curtain cords, etc.
• The product should be placed on a horizontal floor.
• Young children should not be allowed to play unsupervised in the vicinity of the crib.
• The crib should be locked in a fixed position when the child is left unattended.
• All assembly fittings should always be tightened properly and that care should be taken that no screws are loose, because a child could trap parts of the body or clothing (e.g., strings, necklaces, ribbons for babies´ dummies, etc), which would pose a risk of strangulation.
• Be aware of the risk of burning cigarettes, open fires, and other sources of strong heat, such as electric bar fires, gas fires, etc. in the near vicinity of the crib.
• DO NOT use the product if any parts are missing, damaged, or broken. Contact GRACO for replacement parts and instructional literature if needed. Do not substitute parts.
• Do not use the product if any part is broken; torn or missing and use only spare parts approved by the manufacturer.
• Only use the mattress sold with this crib, do not add a second mattress on this one, suffocation hazards.
• Do not use more than one mattress in the product.
• Gaps should not be filled with pillows, blankets, or other items.

CARE & MAINTENANCE

• From time to time check your cot for worn parts, torn material, or stitching. Replace or repair the parts as needed. Use only Graco® replacement parts.
• BASKET: Wipe clean with a damp cloth. NO BLEACH.
• BASSINET Fabric: Machine wash in cold water on a delicate cycle and drip dry. NO BLEACH.
• CARRY BAGS: Machine wash in cold water on a delicate cycle and drip dry. NO BLEACH.
• MATTRESS PAD: Do not machine wash the Mattress Pad. NO BLEACH.
• MATTRESS COVER: Machine wash in cold water on a delicate cycle and drip dry.
• NO BLEACH. Note: Keep boards free of moisture. Do not reinsert boards until the fabric is completely dry. Always assemble the mattress pad with a foam pad on top of the board, and place both fully inside the mattress pad cover.

Parts list

• A Bassinet
• B Mattress Pad
• C Mattress Board
• D Foam Pad
• E Bassinet Legs
• F Carry Bag

Travel Bassinet

See images 1 – 5

To Assemble Travel Bassinet Legs

See images 6 – 11

1. Flip the bassinet upside down, and attach the bassinet legs as shown 6. MAKE SURE basket is not twisted.
2. CHECK that 4 legs are assembled by pulling on them.
3. Attach 3 snaps on the short side of the basket by wrapping snaps around a bar on the bassinet. Repeat on the other side.
4. Flip bassinet over and open.
5. If not in place, insert the mattress pad’s soft side up into the bassinet.

To Fold Travel Bassinet

See images 12 and 13

1. Pull up on one of the yellow rings located on the bottom side of the bassinet.
   • Pro Tip: If you’re having trouble folding, try placing a foot on the bottom of the bassinet to help hold it in place.
2. Fold bassinet as shown 13.

To Remove Travel Bassinet Legs

See images 14 – 18

1. Pull up on one of the yellow rings located on the bottom side of the bassinet.
   • Pro Tip: If you’re having trouble folding, try placing a foot on the bottom of the bassinet to help hold it in place.
2. Fold bassinet as shown 15.
3. Disconnect 3 snaps on the short side of the basket by unwrapping snaps from a bar on the bassinet. Repeat on the other side.
4. Flip the bassinet upside down, and press buttons on four legs to remove the bassinet legs.
5. Lift the bassinet legs off of the bassinet.

To Use a Carry Bag

See images 19 – 24

• Store the product in the bag or away from the child when folded.

1. Pull up on one of the yellow rings located on the bottom side of the bassinet.
   • Pro Tip: If you’re having trouble folding, try placing a foot on the bottom of the bassinet to help hold it in place.
2. Fold bassinet as shown 20.
3. Flip the bassinet upside down, and press buttons on four legs to remove the bassinet legs.
4. Insert a folded bassinet and mattress pad into a carry bag.
5. Insert legs into the carry bag.
6. Use straps on the bag to carry.

How to Clean Mattress Pad

See images 25 – 26

1. Open the flap on the mattress pad. Remove 2 mattress boards.
2. Remove 2 foam pads. Reverse steps to re-assemble.

• DO NOT use mattress pads without boards and foam pads.
• Always assemble the mattress pad with a foam pad on top of the board, and place both fully inside the mattress pad cover.
• Note: Keep boards free of moisture. Do not reinsert boards until the fabric is completely dry.

How to Clean Bassinet Fabric

See images 27 – 28

1. Remove the mattress pad.
2. Disconnect 10 snaps and lift the bassinet fabric from the frame. Reverse steps to re-assemble.

• Allison Baby UK Ltd
• Venture Point, Towers Business Park Rugeley, Staffordshire, WS15 1UZ
• NUNA International B.V.
• Van der Valk Bourmanweg 178 C,
• 2352 JD Leiderdorp, The Netherlands
• Customer Service
• Graco baby. EU
• www.gracobaby.pl
• For UK and ROI
• [email protected]
• +44 0800 952 0063

Documents / Resources

| GRACO 682-3858 Pearl Bedside Sleeper [pdf] Instructions
682-3858 Pearl Bedside Sleeper, 682-3858, Pearl Bedside Sleeper, Bedside Sleeper, Sleeper
---|---

References

• Graco Baby EU: Car Seats, Strollers, & Gear For Your Child | Graco Baby

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>