CHEFMASTER HED492 Warming Lamp Instruction Manual
- June 4, 2024
- ChefMaster
Table of Contents
Chefmaster Warming Lamp
Instruction Manual
Model
HED492 – Warming Lamp Single
HED493 – Warming Lamp Double
HED494 – Warming Lamp Double with Marble Base
Thank you for purchasing your Chefmaster Warming Lamp. To make full use of the product please read this manual carefully before using product and keep it safe for future reference.
Safety Tips
- If you find any damage when the product is unpacked, contact your Chefmaster supplier within 24 hours of receipt of the goods
- Always position on a flat stable surface
- Repairs should always be carried out by a qualified technician
- Never touch the lampshade when the product is on or recently after use.
- Do not fit or remove the bulb when the unit is on
- Do not use this product outside
- Do not carry it when the lamp is hot
- Always switch off and unplug the unit before cleaning
- If the power cord becomes damaged it must be replaced by a qualified technician
- This product is not designed to be used by persons with reduced physical or mental capabilities, lack of experience or knowledge, unless they are given suitable supervision, this includes children.
Pack Contents
- 1 x Chefmaster Warming Lamp
- HED492: Bulb X 1
- HED493 / HED494: Bulb X 2
Assembly Instructions
- Remove all packaging including all protective plastic from your Chefmaster Warming Lamp
- Position the base on a flat surface
- Plug your Chefmaster Warming Lamp into the mains
- The Warming Lamp will now be ready to turn on
Operation
- Place food into a heat-proof tray, stainless steel or ceramic GN pan
- Plug the Warming Lamp into the mains and switch it on
- The bulbs will now be on and heating up
Cleaning & Maintenance
- Before cleaning, disconnect the warming lamp from the electricity supply.
- Use a soft damp cloth to clean the frame of the Warming Lamp. Unclean the lamp shade when it has cooled down.
- DO NOT submerge the Warming Lamp in water or use water sprays to clean it
- Always clean your Chefmaster Warming Lamp daily
Troubleshooting
| Fault | Possible Cause | Solution |
|---|---|---|
| The unit is switched on, thebulb is not heating | The unit is not plugged in |
The plug or lead are damaged The fuse has blown The bulb is not inserted
properly
The bulb has failed| Check the unit is plugged in and switched on
Contact your Chefmaster distributor
Replace the fuse Remove the bulb and re-insert
Replace the bulb
Transportation and Storage
Please handle your Warming Lamp with care to prevent any damage to the unit and internal parts. The Warming Lamp should be stored somewhere which is ventilation and non-corrosive gas.
Do not store any flammable objects near the equipment.
Technical Information
HED492
Voltage ~230v 50/60Hz
Power 250 watt
Weight 4.8kg
Dimensions 290 x 250 x 700mm
HED493
Voltage ~230v 50/60Hz
Power 2 x 250 watt
Weight 6.9kg
Dimensions 380 x 250 x 700mm
HED494
Voltage ~230v 50/60Hz
Power 2 x 250 watt
Weight 6.9kg
Dimensions 400 x 270 x 700mm
- Chefmaster Warming Lamp is supplied with a 3-pin plug and lead with a 13 amp fuse
- The appliance must be earthed
- If in doubt contact a qualified electrician or your Chefmaster distributor
Disposal
Under WEEE regulations this product must not be disposed of as household waste. To prevent damage to the environment and humans this product must be disposed of in an approved and environmentally friendly recycling process. For more information on how to dispose of this correctly please contact your Chefmaster distributor or local authority responsible for waste disposal.
Compliance
All Chefmaster parts and products have undergone a stringent testing process
to ensure that comply with all European standards and specifications.
All Chefmaster products carry the CE approval symbol.