Dyon 71FjIR0YuhL Smart 40 XT Remote Control Replce Instruction Manual

Dyon 71FjIR0YuhL Smart 40 XT Remote Control Replce

Product Information

Product Version: V1.0.1
The product is equipped with detailed operating instructions that contain important information, warnings, support, conformity information, and data protection information. The operating instructions can be found in your language on the Internet at: https://www.axdiaservice.de/bda.

Setup

• Step 1: Press the OK button to start the initial setup. Use the / buttons to select the desired language and press the OK button to move to the next option.
• Step 2: Choose your appropriate country.
• Step 3: Confirm the data collection information by marking Accept and press the OK button to continue.
• Step 4: Make the network settings by first selecting the connection type and, in the case of WiFi, enter the connection data. Enter the password and confirm by pressing the OK button to move to the next option.
• Step 5: Set up Netflix, if you have a user account.
  • Note: If you set up Netflix, there will be no channel search. Skip the setup of Netflix first to set up the TV reception.
• Step 6: If you have set up Netflix, exit Netflix to DVB-T/-C mode. No channel search has been performed, now switch to the desired Tuner mode first and then do a channel search via the menu.
• Step 7: If you skipped the Netflix setup, you can now choose the TV Mode. Home mode for adjusting the illumination level is recommended for private use.
• Step 8: Select the desired Tuner Mode.
• Step 10: Wait until the channel scan is finished.

Operating instructions

• Please observe the notes and warnings in the operating instructions. You can find the operating instructions in your language on the Internet at: https://www.axdiaservice.de/bda.
• In the operating instructions, you will find detailed instructions, support and conformity information as well as information on data protection.

1. Mounting
   Please pay attention to the instructions of the stand mounting provided in the manual.

2. Switch ON

   • Step 1: Connect the TV with the power supply.

   • Step 2: Please establish the connection for the antenna to the desired mode of reception. The antenna connection for DVBS, DVBC and DVBT you will find on the backside, face to the left if viewed from the front.

   • Note on DVB-T
     Whether and how many transmitters can be received depends on the location of the device and the availability of DVB-T transmitters in this region. DVB-T radio stations are only available in very few regions. Please note that when using DVB-T, a new station search should be performed every time you change location. Broadcast stations and their transmission frequency vary from region to region.

   • Note on DVB-C Reception
     Via DVB-C the programs can be received analogue or digital. If possible you should prefer the digital reception mode. In this mode there are available more channels with a better picture quality.

   • Encrypted Channels
     Via satellite, DVB-T or DVB-C you can receive also encrypted TV channels. Therefore, you need a CAM Module and a Smart card of your service provider. Which programs are usable depends on the contract.

   • Step 3: If desired you can insert a CAM Module and a Smart card of your service provider into the CI+ Slot.

   • Note
     Module and Smart card are not included in the delivery. The activation of the card can take a few minutes when it will be used for the first time. The device controls the module after every switching on. Please pay attention to the manual of CI+ Module and Smart card. Just CI+ Modules and Cards are usable. Other models are not supported.

   • Note on CI+
     Please pay attention that function can be limited on some channels. The program provider limits this. The manufacturer is not responsible for this.

3. Switch ON

   • Step 1: Insert the batteries making sure the polarity into the remote control.
   • Step 2: To switch on press the red “power button” on the top left on your remote control.
   • Step 3: The device will start and the initial setup will be shown.
   • Conformity
     Axdia International GmbH hereby declares that this device is in conformity with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/30/EU, 2014/35/EU. The complete CE declaration of conformity for this product can be found on the Internet at: https://www.axdiaservice.de/konform.

4. Setup

   • Step 1: Press the OK button to start the initial setup. Use the UP/DOWN buttons to select the desired language and press the OK button to move to the next option.
   • Step 2: Please choose your appropriate country.
   • Step 3: Confirm the data collection information by marking “Accept” and pressing the OK button to continue.
   • Step 4: Now make the network settings by first selecting the connection type and, in the case of WiFi, marking your network with the OK button and entering the connection data. Now enter the password and confirm with press the OK button to move to the next option.
   • Step 5: In the next step you can set up Netflix if you have a user account.
   • Attention: If you set up Netflix here, there will be no channel search. Skip the setup of Netflix first to set up the TV reception.
   • Step 6: If you have set up Netflix, exit Netflix to DVB-T/-C mode. No channel search has been performed, now switch to the desired Tuner mode first and then do a channel search via the menu.
   • Step 7: If you skipped the Netflix setup, you can now choose the TV Mode. “Home” mode for adjusting the illumination level is recommended for private use.
   • Step 8: Now select the desired Tuner Mode.
   • Step 9: For satellite, you also can use a predefined channel list for the ASTRA 19.2° satellite.
   • Step 10: Then wait until the channel scan is finished.

Important Remote Control Keys

Note

• For detailed Information about operating and about the device please read the enclosed manual carefully.
• If you have any further questions please refer to our customer service [email protected].
• In order to handle your issue quickly we kindly ask you to provide us with the following information:
  • Name of DYON – Product
  • Serial number and date of purchase
  • Description of problem
• Maximum transmit power: 18.6dBm

References

• Kontaktformular - AXDIA Service
• Konformitätserklärungen - AXDIA Service

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>