ANKER 317 Charger with USB-C and USB-C Cable 100W User Manual

: June 13, 2024
: Anker

Table of Contents

ANKER 317 Charger with USB-C and USB-C Cable 100W
Product Information
Product Usage Instructions
FCC Statement
Declaration of Conformity
Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ANKER 317 Charger with USB-C and USB-C Cable 100W

Product Information

Product: Anker 317 Charger (100W)
Series: 3
Manufacturer: Anker Innovations Limited
Input: 100-240V~2.2A, 50-60Hz
No-Load Power Consumption: 0.078W
Output: 5V 3A/ 9V 3A/ 12V 3A/ 15V 3A/ 20V 5A (100W Max)
ActiveShieldTM: The charger is equipped with ActiveShieldTM, which intelligently monitors temperature and adjusts power output to protect your connected devices.

Product Usage Instructions

Before using the product, read all the instructions in the user manual.
Ensure that the input voltage is within the range of 100-240V and the frequency is between 50-60Hz.
Connect the charger to a power outlet using the provided power cord.
Connect your device to the charger using a compatible USB-C cable.
The charger supports multiple output voltages. Select the appropriate voltage for your device by pressing the corresponding button.
Once connected, the charger will automatically adjust the power output based on the connected device’s requirements and temperature conditions.
To ensure electrical safety and optimal performance, it is recommended to operate the charger within an ambient temperature range of 0-25°C (32-77°F).
If you have any questions or need assistance, visit the Ankersupport website at https://www.anker.com/support.

Follow Anker on social media:

Instagram: @anker_official
Twitter: @AnkerDeutschland
Instagram (Japan): @anker_jp
Twitter (Japan): @AnkerJapan

For customer service inquiries:

Russia: [Customer Service Contact Information]
Argentina: [Customer Service Contact Information]
Israel: [Customer Service Contact Information]

Attention

Read all the instructions before using the product.

The product is designed for use with IT equipment only.
Naked flame sources, such as candles, must not be placed on the product.
The disconnection from line voltage is made by AC plug.
In case of broken plugs, the product must be disposed of.
If you want to clean the product, only use a dry cloth or brush.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note : This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.

The following importer is the responsible party (for FCC matters only).
Company Name : Fantasia Trading LLC
Address : 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone : +1 (800) 988 79733

IC Statement
This digital apparatus complies with CAN ICES-003(B)/NMB- 003(B).

Declaration of Conformity

Hereby, Anker Innovations Limited declares that this product complies with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/EC & 2019/1782/EU. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com.

Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product complies with Electrical Equipment(Safety) Regulations 2016 & Electromagnetic Compatibility Regulations 2016 & The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 & The Ecodesign for Energy-Related Products Regulations 2010. The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com.

For FAQs and more information, please visit:
anker.com/support

For tutorial videos, FAQs, manuals, and more information, please visit: https://support.anker.com Or scan the QR code below
Product Number : A2672 51005003865 V2

Indoor use only
This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
The following importer is the responsible party (contract for EU and UK matters)
Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3,80807 Munich, Germany
Anker Technology (UK) Limited | GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom

Specifications

Input	100-240V~2.2A, 50-60Hz
Output	5V 3A/ 9V 3A/ 12V 3A/ 15V 3A/

20V 5A (100W Max)

Average Active Efficiency| 82.1%
Efficiency at Low Load (10%)| 71.9%

No-Load Power Consumption

|

0.078W

---|---
Recommended Oper- ating Temperature| 0-25℃ / 32-77 ℉
Note : To ensure electrical safety and product performance, the output power may fluctuate based on the ActiveShield™* safety

m（echanism℉w） when the ambient temperature is between 26-35℃

78.8-95 with a high output load.

*ActiveShield™ enhances protection by intelligently monitoring temperature and adjusting power output to safeguard your connected devices.

Customer Service

18-month limited warranty
Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty+