ANKER A3993RC Soundcore True Wireless Earbuds User Manual
- June 13, 2024
- Anker
Table of Contents
- ANKER A3993RC Soundcore True Wireless Earbuds
- Product Information
- Product Usage Instructions
- SUPPORT
- APP
- FIRMWARE UPGRADE
- AMBIENT SOUND
- WEARING
- CHARGING
- POWERING ON/OFF
- PAIRING
- DUAL CONNECTIONS
- MANUAL PAIRING
- CONTROLS
- RESET
- LED LIGHT GUIDE
- TIPS
- PRODUCT SPECIFICATION
- ABOUT COMPANY
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
ANKER A3993RC Soundcore True Wireless Earbuds
Product Information
The product is a pair of earbuds called Soundcore Life Note 3i. It comes with a charging case and supports features such as Active Noise Cancellation (ANC), Transparency mode, and Normal mode. The earbuds can be customized using the Soundcore App, which allows users to adjust volume, control playback, activate Siri, adjust EQ, switch ANC modes, update firmware, and explore more.
Product Usage Instructions
- To upgrade the firmware, ensure that the earbuds are placed in the charging case and keep the case open until the upgrade is completed.
- To switch ANC/Transparency/Normal modes, use the Soundcore App.
- To choose the EarTips that fit your ears best for comfortable wearing.
- To charge the earbuds, fully dry off the USB charging port before connecting a certified USB-C charging cable. For wireless charging, place the charging case at the center of a wireless charger.
- To power on the earbuds, open the charging case, and they will automatically turn on. To power off, place the earbuds back in the charging case and close it.
- To pair the earbuds with a device, remove the protective film from the earbuds, put them back in the case, and close the lid. Then open the charging case to enter Bluetooth pairing mode. On your device’s Bluetooth list, select “Soundcore Life Note 3i” to connect.
SUPPORT
For FAQs, detailed user manual and more information, please visit www.soundcore.com/support
APP
Download the Soundcore App to customize the user interface (e.g. adjust volume, control playback, activate Siri), adjust EQ, switch ANC modes, update firmware, and explore more.
FIRMWARE UPGRADE
Ensure the earbuds are placed in the charging case and the case remains open until the firmware upgrade is completed.
AMBIENT SOUND
Switch ANC/Transparency/Normal modes in the Soundcore App.
- ANC (Active Noise Cancellation): Reduce unwanted background noise.
- Transparency: Stay aware of your surroundings while listening to music.
WEARING
Choose the EarTips that fit your ears best.
CHARGING
- Fully dry off the USB charging port before charging.
- Use a certified USB-C charging cable to prevent any damage.
POWERING ON/OFF
- Open the charging case, the earbuds will automatically power on.
- To power off, place the earbuds in the charging case and close it.
PAIRING
Remove the protective film from the earbuds, put them back in the case, and close the lid Open the charging case, the earbuds will automatically enter Bluetooth pairing mode. Select “Soundcore Life Note 3i” on your device’s Bluetooth list to connect.
DUAL CONNECTIONS
There are two ways to connect the earbuds with two Bluetooth devices at the same time.
- In the Soundcore app, go to settings and select Dual Connections > Connect New Device.
- Alternatively, wear the earbuds, then press and hold the touchpad on both earbuds for 3 seconds simultaneously. You can then connect to the earbuds from your second device’s Bluetooth settings.
MANUAL PAIRING
To manually enter Bluetooth pairing mode, place the earbuds in the charging case and leave the case open, then press and hold the button on the case for 3 seconds until the LED indicator on the charging case flashes white.
CONTROLS
- x1: Press once
- x2: Press twice
- 2s: Press and hold for 2 seconds
- x1: Press once
- x2: Press twice
- 2s: Press and hold for 2 seconds
RESET
- Reset if the earbuds cannot properly pair with each other or with other devices.
- Place the earbuds in the charging case and leave the case open. Press and hold the button on the case for 10 seconds until the LED indicator on the charging case flashes red 3 times . This confirms that the reset was successful and your earbuds can be connected normally.
LED LIGHT GUIDE
- Steady white
- Steady red
- Flashing white
- Flashing red
TIPS
- Bluetooth Pairing: For some smartphones, you may be requested to re-confirm the pairing on a pop-up window after you have selected “Soundcore Life Note 3i” to pair.
- Breaking Bluetooth Connection: Turn off your Bluetooth device and turn it on again. Remove “Soundcore Life Note 3i” from your device’s Bluetooth list.
- Reset: If you try to reset the earbuds, make sure that the earbuds are being charged in the case and leave the case open.
PRODUCT SPECIFICATION
- Input: 5V 0.5A
- Charging time: 2 hours
- Playtime (varies by volume level and content):
- ANC off: Up to 10 hours (Up to 40 hours with the charging case)
- ANC on: Up to 8 hours (Up to 32 hours with the charging case)
ABOUT COMPANY
-
support.mea@soundcore.com (For Middle East and Africa Only)
-
+1 (800) 988 7973 (US/Canada)
-
+44 (0) 1604 936200 (UK)
-
+49 (0) 69 9579 7960 (DE)
-
03 4455 7823 (日本)
-
+86 400 0550 036 (中国)
-
+82 02-1661-9246 (한국)
-
+971 520750842 (Middle East & Africa)
-
+971 8000320817 (UAE)
-
+966 8008500030 (KSA)
-
+965 22069086 (Kuwait)
-
+20 8000000826 (Egypt)
-
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
The following importer is the responsible party (contract for EU and UK matters) -
Anker Technology (UK) Limited
GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom -
Anker Innovations Deutschland GmbH
Georg-Muche-Strasse 3, 80807 Munich, Germany
FOR MORE INFORMATION
soundcore.com/support