Myplus GMPRO880 True Wireless Headphones User Manual
- June 13, 2024
- Myplus
Table of Contents
Myplus GMPRO880 True Wireless Headphones
Product Information
True wireless headphones are a pair of wireless earbuds that provide a convenient and hassle-free listening experience. These headphones offer a truly wireless design, meaning there are no cables or wires connecting the earbuds to each other or to a device. They are equipped with advanced Bluetooth technology, allowing you to connect them wirelessly to your smartphone, tablet, or any other Bluetooth-enabled device.
The headphones come with a charging case that not only protects them when not in use but also serves as a portable charging station. The case has a built-in battery that can recharge the headphones multiple times, ensuring that you always have enough power for your listening needs.
The True wireless headphones feature high-quality audio drivers that deliver clear and immersive sound. They have a comfortable and ergonomic design, making them ideal for long listening sessions. With their lightweight construction and secure fit, they are perfect for workouts, outdoor activities, and daily commutes.
Product Usage Instructions
Charging the headphones:
- Place the headphones into the charging case.
- Ensure that the charging pins on the headphones align with the charging contacts in the case.
- Close the case and connect it to a power source using the provided charging cable.
- The LEDs on the case will indicate the charging status of the headphones.
- Once fully charged, remove the headphones from the case.
Pairing the headphones with a device:
- Ensure that Bluetooth is enabled on your device.
- Open the Bluetooth settings on your device and search for available devices.
- Select the headphones from the list of available devices.
- The headphones will automatically pair with your device.
Adjusting the fit:
- Choose the appropriate ear tips from the provided options.
- Attach the ear tips to the headphones.
- Insert the headphones into your ears and adjust them for a secure and comfortable fit.
Controlling playback and calls:
- To play or pause music, press the button on either earbud once.
- To skip to the next track, double-press the button on the right earbud.
- To answer or end a call, press the button on either earbud once.
- To reject an incoming call, press and hold the button on either earbud for a few seconds.
Charging the headphones with the case:
- When the headphones run out of battery, place them back into the charging case.
- The case will automatically start charging the headphones.
- Ensure that the case has enough battery power by charging it regularly using the provided cable.
In the light display interactive area, the first light color of charging and opening&closing is the battery indicator, red light below 20%, white light between 21%-80%, and blue light between 81%100%.
Product Host and Accessories
- 880 × 1
- Type-C charging cable x 1
- Metal hanging chain × 1
- User manual x 1
Product Structure Description
- touch area (FMB)
- secondary microphone sound-receiving hole
- speaker soundhole
- earbuds charging pole
- main microphone jack
- type-C charging port
- hanging chain buckle
- right earphone compartment
- left earphone compartment
Before using the earbuds, please read this User Guide carefully and keep it for future reference.
Product Specifications
- Version: V 5.2
- Speaker specification: 13MM 320
- Frequency response range: 20H2-20KHz
- Using distance: About 10 meters
- Music playback: About 5 hours
- Talk time: About 5 hours
- Standby time: About 150 hours
- Charging time: About 1.5 hours
- Battery specification: 35mAh*2/500mAh
- Speaker sensitivity: 105‡3dB at 1KHz
- Weight: earphone 3.6g*2, charging compartment 68g
- The above data are laboratory-measured values, and actual use may vary according to specific circumstances. The music playback and talk time data are all measured at 50% of the earbud’s volume.
Packing List
Instructions
Power ON
It automatically enters the pairing state after being taken out from the
charging compartment, the white light turns on for one second to complete the
boot.
Pairing
When taking out the earbuds from the charging compartment, the white light
flashes quickly once per second, entering pairing mode automatically. Use a
functional device to search for the name of “880”, and click to pair it. If
there is no connection within 3 minutes, the earbuds will automatically shut
down.
Power OFF
- It will automatically shut down while putting the earbuds into the charging compartment.
- Without a mobile phone or other device connected, press and hold the “FMB” for about 5 seconds, the white light flashes 3 times quickly, accompanied by a shutdown prompt sound to complete Power OFF.
Tips: When the earbuds are connected to a mobile phone or another device, it cannot be turned OFF by long pressing “FMB”.
Call function
- Answering a call: When there is an incoming call, tap “FMB” once to answer.
- Hang up the call: In the call state, touch “FMB” once to hang up.
- Reject a call: When there is an incoming call, tap “FMB” twice to reject it.
Music function
After 880 is successfully connected to your mobile phone, you can open the
music app to play music.
In music mode:
- Pause/Play: Touch the multifunction button once to pause the music-play, touch it again to continue.
- Previous song: Tap the left “FMB” twice to the previous song.
- Next song: Tap the right “FMB” twice to the next song.
- Increase volume: Long press the right earphone “FMB”.
- Decrease volume: Long press the left earphone “FMB”.
Game Mode / Music Mode
- After the earbuds are successfully connected to the mobile phone, tap the left or right “FMB” 3 times to enter game mode, accompanied by a prompt sound of “Game Mode” with special sound effects.
- Touch again the left or right “FMB” 3 times to enter music mode with the prompt sound of “Music Mode” with special sound effects.
- In music mode, the earbuds indicator light is off; In game mode, the earbuds indicator light flashes slowly (about 5 seconds per frequency).
Tips: Under music mode, will bring you the ultimate experience of
listening to high-quality music.
Under game mode, will bring you the ultimate gaming experience with ultra-low
latency, meanwhile slightly increasing power consumption.
Quickly switch different modes with one click, and enjoy multiple experiences
of music and games.
Charging and lighting effects
880 is a wireless earbud for music and games with cool RGB lighting effects. You can master the power status of the charging compartment through the below:
- Earphone low battery reminder: The white light flashes quickly(2-3 times per second), and repeats every 3 minutes, accompanied by a voice and special sound effects.
- Earphone charging: Put them into the charging compartment, close it and they will be charged by light up in white, and light will turn off while fully charged.
Opening charging compartment: After opening, the RGB lights of the charging compartment gradually brighten from the central LOGO position to the outer lights. The initial light color is the current battery indicator color, take a breath and flash slowly, then turn yellow-white-blue colors in sequence, each color light shows a breathing effect and then turns off.
Charging compartment lid is closed: After it is closed, the RGB lights of the charging compartment dim from outside to the middle, the initial light color is the current battery indicator color, do a breathing slow flash, and then show yellow-white-blue colors in sequence, each color light shows a breathing effect and then turns off.
The light color corresponds to the power level: Red light below 20%, white light at 21%-80%, blue light at 81%-100%
Intelligent voice assistant
- Activate: Tap the left “FMB” about 4 times to activate “Sir”/ voice assistant.
- Exit: Voice exit “Siri” / voice assistant or be canceled by mobile phone.
Charging and battery precautions
This product has a built-in non-removable rechargeable battery.
The charging current and voltage is 5V/500mA, please do not charge the product
with a charger exceeding 5V/500mA, otherwise, it will easily cause damage to
the battery.
Safety Precautions
- To ensure your safety, do not wear or place the earbuds too close to the pacemaker (less than 10cm).
- Children should use this device under adult supervision, this product is not a toy.
- Using the earbuds at high volume, especially for a long time, may damage your hearing.
- For traffic safety, do not use earbuds while driving or riding a bicycle.
SAFETY WARNINGS
Name and content of toxic and hazardous substances or elements in the product
This form is prepared according to the provisions of SJ/T 11364-2014
FAQ
-
What should I do if the left and right ear pairing fails?
If the left and right ears cannot be paired, please turn off the BT function of the mobile phone first, put the earphones back into the charging compartment, and then take out the earphones according to the above instructions to complete the pairing steps. After they are successfully paired, turn on the BT function of the mobile phone, and manually click it to connect. -
What to do when the phone is connected to 2 earphones at the same time?
- Turn off the BT function of the phone, pick up the 2 earphones from the charging compartment at the same time, pair them again, turn on the BT of phone after the pairing is successful, and manually click it to connect again.
- The mobile phone directly disconnects both earphones and reconnects according to the instructions.
-
Several problems that may occur when pausing playback:
After testing the Apple phone, the automatic re-connection cannot be performed after turning it on again. You need to manually click the earbuds name to reconnect, then it can be used normally. -
Earbuds have noise problems:
- Whether there is interference from large electronic equipment nearby.
- Confirm whether there is any noise in the sound source itself, change the music, and test them again.
- When the battery is low, there will be noise. Put the earphones into the charging compartment for charging
-
Earbuds sound delay problem:
- The selected chip for PR0880 is a low-latency chip, and the single transmission link is 30ms.
-
There is no sound from the earphones, touch them with no effect, and the indicator light flashes abnormally
- Turn off the BT of the mobile phone, put the earphones into the charging compartment, and take them out again.
- After the reset is successful, repeat the above steps to reach the connection.
-
Other possible problems:
- The secondary ear is stuck, there may be electromagnetic interference nearby.
- Earbuds are not charging:
- Confirm if the charging compartment has electricity;
- Whether the thimble of the charging compartment and earphone are in good contact with each other for electric shock.
- The earbuds do not turn on: Confirm whether the earbuds are powered, or whether the white light of the earbuds is on when placed into the charging compartment.
- The voice of the other party cannot be heard in the earbuds call state:
- Confirm whether the earbuds is connected to a mobile phone;
- Whether switch to the BT call state of mobile phone.
-
A single earphone is not charged when placed in the charging compartment:
- Take out the L/R earphones at the same time, and put them back into the charging compartment;
- Insert the power cord of the charging compartment to charge.
-
Left and right earphones are disconnected:
- Turn on both earphones out of the warehouse, in the state of disconnection, tap the left and right earphones 4 times and the 5th long press at the same time (tap the FMB area with 4 short 1 long press), let go after hearing the “Du Du” sound for about 5 seconds, wait for about 8 seconds, the pairing is automatically completed. The earbuds can be used normally after placing it in the charging compartment. (This function is invalid when connecting mobile phones or other external devices)
Warning:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1 ) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class
B digital device, under radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>