STANO 032022 Standing Designer Acrylic Bathtubs Instruction Manual
- June 13, 2024
- STANO
Table of Contents
STANO 032022 Standing Designer Acrylic Bathtubs
Product Information
The free-standing designer acrylic bathtubs are modern and stylish additions to any bathroom. Made from high-quality acrylic, these bathtubs are durable and easy to maintain. The bathtubs come with adjustable feet for stability and leveling. They are designed to meet national regulations for plumbing installations in buildings. The product may undergo specification and component modifications without prior notice as part of the continuous improvement policy.
Product Usage Instructions
- Prepare the installation site by ensuring that the surface where the bathtub will be placed is flat, clean, and free from humidity. It should also provide adequate support for the bathtub.
- Position the bathtub on its final installation location and adjust the hidden feet to ensure stability and levelness.
- Install the taps and connect the siphon to the drain outlet of your bathroom, following all plumbing and building codes and regulations.
- Run water into the bathtub to check for any potential leaks and address them.
- Apply a silicone joint all around the base of the bathtub and allow it to dry for at least 24 hours.
Note: It is recommended to regularly wash the bathtub with special products designed for cleaning acrylic bathtubs. Avoid using abrasive products that may damage the bathtub’s surface.
Please contact our customer service at contact@stano.fr for any further questions or assistance.
REMARKS
- We warmly thank you for selecting this free-standing acrylic bathtub.
- You need to inspect the product before starting the installation as we will not be able to accept any claim for faults or damages once the product is installed.
- All plumbing installation work should be carried out in compliance with national regulations concerning plumbing installations in buildings. This product can only be installed by a qualified installer. We decline all responsibility in the event of improper installation.
- A minimum of two persons are needed for the installation of this free-standing bathtub.
- In order to simplify future maintenance, please ensure that all plumbing connections around the bathtub can be easily accessed.
- In order to keep the good appearance of this product, we recommend you wash it regularly with special products for the cleaning of acrylic bathtubs. Be careful not to use any abrasive products as they may damage the surface of the bathtub.
- As per our policy of continuous improvement of our products, please note that we may modify the specifications and components of our products without prior notice.
NECESSARY TOOLS (NOT INCLUDED)
STEPS OF INSTALLATION
- Prepare the site where the bath will be installed. Make sure that the surface where the bathtub will be placed is perfectly flat, clean, free of any humidity and offers adequate support for this bathtub.
- Position the bath on its final installation location. Adjust the (hidden) feet of the bathtub so that the bathtub is perfectly stable and leveled.
- Install the taps, then connect the siphon to the drain outlet of your bathroom. Strictly respect all plumbing and building codes and usages.
- Then, run water into the bathtub in order to check for potential leaks and to solve them.
- At last, apply a silicone joint all around the base of the bathtub. Leave to dry for at least 24 hours.
ABOUT COMPANY
- STANO.
- 3 rue d’Envedel, 34500 Béziers, France
- contact@stano.fr
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>