MOKLEBA 84572 Freestanding Bathtub Instruction Manual
- June 13, 2024
- MOKLEBA
Table of Contents
MOKLEBA 84572 Freestanding Bathtub Instruction Manual
OFFICIAL WEBSITE: WWW.MOKLEBABATH.COM
E-MAIL:SALES@MOKLEBABATH.COM
MANUFACTURED BY ART BATH COMPANY INC
BATHTUB PICTURED MAY VARY SLIGHTLY DIFFERENT THAN THE ONE PURCHASED
FOR RESIDENTIAL USE ONLY IN US & CA
WARRANTY VOID OUTSIDE US & CA
REVISED 10/16
BEFORE YOU BEGIN
-
Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation instructions.
Follow the sections that pertain to your particular installation. Doing so will help you avoid costly mistakes.
In addition to proper installation, please read all operating and safety instructions -
Please provide adequate space for the bath unit in accordance with the rough-in. Arrange the location of the drain in advance
-
These instructions contain important care, cleaning, and warranty information
COMPLIANCE INFORMATION
• Art Bath Company Inc only provides the bathtub. It is the buyer’s or
installer’s responsibility to make sure that the bathtub and installation
complies with local state, city, and regulatory laws. It is the al s o the
responsibility of the buyer or installer to ensure that the waste drain is
made watertight with silicone sealant or caulking compound
SAFETY
- Please use all necessary safety precautions when using the bathtub
- Bathtub may become slippery when wet and increase risk of fall or injury
- Use of handrails or handicap accommodations is highly recommended for seniors or those with disabilities
- Ensure small children are supervised when using the tub to prevent risk of drowning or injury
- Pets should not be left in the tub without proper supervision
- Under no circumstances is the manufacturer liable for bodily harm or injury stemming from accidental falls or misuse of our bathtub
MAINTENANCE
- Most dirt will simply be washed off with mild soap and water
- CAUTION: Do not use any industrial strength cleaners or solvents to clean the bathtub surface. The surface will be damage
- Only use calcium remover when cleaning chrome surfaces
- CAUTION: Avoid getting calcium remover on the bathtub surface
REPAIR
- For Minor Scratches & Dulling: Use liquid polishing compound suitable for acrylic
- For Deep Scratches or Burns: Use very fine sandpaper (at least 1500 grit) in a circular motion covering an area wider than the scratch. Always wet the sandpaper with water before sanding. Repeat until the scratch is eliminated.
Finally, polish the area with polishing compound to bring back its original shine. Use a soft cloth and a small amount of polish to buff the surface. Repeat the process as needed
INSTALLATION REQUIREMENTS
Tools Required
Materials Required
- Plumbers Putty
- Gypsum Cement(optional)
- protective Covering for the Bathtub
- Wall Coverings (asnecessary)
- Construction Adhesive(optional) Silicone Sealant/Caulking
- Nails
INSTALLATION NOTES
- Read the entire installation manual before beginning the installation. If installing a rim-mounted faucet (only on certain models), make sure there is no interference with the overflow drain before drilling any holes
- Position a protective covering or similar material in the bottom of the unit to protect the bathtub’s surface from being scratched
CLEARANCE REQUIREMENTS
- Measure the area where you intend to install the bathtub to ensure you have adequate space avail- able for the installation
SITE REQUIREMENTS
Sub-floor Preparation
Check the flooring where the bathtub is going to be installed and make repairs
as needed. Make sure the sub-floor is level. It is strongly recommended to
prepare a waterproof layer for the sub-floor beforehand
FAUCET INSTALLATION ON THE BATHTUB (OPTIONAL)
- Locate where you will drill the holes into the acrylic, and stick masking tape onto that area. This will prevent the acrylic from chipping
- Drill holes for the faucets on the bathtub at the desired location
- Unscrew the bolts at the bottom of the bathtub using an adjustable key. Then carefully take out the top of the tub and place it on a throw rug or other protective floor covering to prevent damage to the bath and the floor Install the faucets according to the faucets’ manufacturer instructions. Then assemble the top of the bathtub with the skirt, and secure the bolts at the bottom as shown in the illustration.
Notes: Check all pipe connections to ensure no leakage occurs.
SPECIFICATION
INSTALLATION
(Option #1)
Option #1
- Screw the supplied Adapter to the p reinstalled bathtub drain. Use Teflon tape and/or sealant
- Connect the P-T rap to the Adapter using PVC pipe seal ant to adequately join the two parts
- Then, as shown in the illustration , connect the P – T rap to the Flexible Tube
- Connect the Flexible Tube to your existing floor drain as illustrated, using PVC pipe sealant to jo in the p arts together
SECURING THE BATHTUB
BEFORE FIXING THE BATHTUB TO THE FLOOR, MAKE SURE YOU HAVE INSTALLED YOUR FAUCET{IF APPLICABLE) AND THAT YOU HAVE CHEC KED FOR LEAKS
- Test for leak by filling up the tub and let it drain. Then check all plumbing connections for leaks
- Fix the bathtub to the floor by applying a strong Tub &Tile Adhesive under each edges of the tub that will be in contact with the floor: The rim, the lateral bars and the feet
- Finally, for a professional finish, draw a bead of silicone around the base
- Let it dry for 24 hours
RE TURNS & WARRANTY
We thank you for your purchase. If you are not satisfied with your purchase or
have an issue with our product, please kindly let us know. our full returns
policy is outlined below. carefully read over our terms before contacting us.
If you have questions, our customer service team can be reached:
sales@moklebabath.com.
For 1-3 years from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or furnished with the product, Moklebabath.com will supply factor specified replacement parts for free if needed. This limited warranty is valid only in the United States or Canada and applies only when the major appliance is used in the country where if was purchased. Outside the United States and Canada, this limited warranty will be voided if it is used outside the United States and Canada. Proof of original purchase date is required to obtain service under this limited warranty
WARRANTY EXCLUSIONS
The included warranty is null/void and does not cover the following
conditions:
- Service calls to correct the installation of your major appliance, to instruct you on how to use your major appliance, to replace or repair house fuses, or to correct house wiring or plumbing.
- Service calls to repair or replace appliance light bulbs, air filters or water filters. Consumable parts are excluded from warranty coverage.
- Repairs when your major appliance is used for other than normal, single-family household use or when it is used in a manner that is contrary to published user or operator instructions and/or installation instructions.
- Damage resulting from accident, alteration, misuse, abuse, fire, flood, acts of God, improper installation, installation not in accordance with electrical or plumbing codes, or use of consumables or cleaning products not approved by us.
- Cosmetic damage, including scratches, dents, chips or other damage to the finish of your major appliance, unless such damage results from defects in materials or workmanship and is reported to us within 30 days from the date of purchase.
- Any food loss due to refrigerator or freezer product failures.
- Costs associated with the removal from your home of your major appliance for repairs. This major appliance is designed to be repaired in the home and only in-home service is covered by this warranty.
- Repairs to parts or systems resulting from unauthorized modifications made to the appliance.
- The removal and reinstallation of your major appliance if itis installed in an inaccessible location or is not installed in accordance with published installation instructions.
- Major appliances with original model/serial numbers that have been removed, altered or cannot be easily determined. This warranty is void if the factory applied serial number has been altered or removed from your major appliance. The cost of repair or replacement under these excluded circumstances shall be borne by the customer.
RETURNS, DAMAGES, MISSING PARTS
Ground Shipments – Range Hoods, Shower Heads/Wands, Sinks, Tub Fillers
We accept all returns within 30 days with return shipping to be paid by the
customer if the item was:
Deemed unsuitable the wrong size purchased but not used an accidental purchase
buyer’s remorse
Resolution Process for Damages or
Missing Items (Ground Shipments)
Customer provides images of damage (mandatory)
Customer notifies us (Moklebabath.com) for missing parts or items
We send a replacement unit (discretionary)
We send replacement parts
Customer is provided a new tracking number for the replacement or parts
shipped via Ground shipping or Parcel
Freight Shipments – Bathtubs
Oversized Range Hoods
All bathtubs will ship via freight. Due to the large size and weight, please
allow approximately 2 weeks for the item to arrive. If you have received a
freight shipment, please kindly:
Inspect for damages (ex: cracks, chips,etc.)
Inspect for missing parts or items part of a bundle
DISCLAIMER OF IMPLIED WARRANTIES: LIMITATION OF REMEDIES
CUSTOMER’S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE
PRODUCT REPAIR AS PROVIDED HEREIN. IMPLIED WARRANTIES, INCLUDING WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE
YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. MOKLE· BABATH.COM SHALL NOT BE
LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES AND PROVINCES DO
NOT ALLOW THE EX· CLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES OF MER·
CHANTABILITY OR FITNESS, SO THESE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,AND YOU MAY ALSO HAVE OTHER
RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE.
Resolution Process for Damages
or Missing Items (Freight Shipments)
Customer provides images of damage (mandatory)
Customer notifies us (Moklebabath.com) for missing parts or items
We send a replacement unit (discretionary)
We send replacement parts
Customer is provided a new tracking number via our 3rd party L TL carrier for
the replacement or parts
If the customer contacts us after the 30-day window for a return,
ShopRangeHoods.com will require a 15-40% restocking fee to be applied to the
return depending on the condition of the item and the number of days passed
the standard 30-day window.
If shipping damage is noticeable upon arrival, please immediately reject the
package, take pictures of the damages, and contact customer support for
assistance.
If the item is delivered and arrived damaged, we will either send a
replacement and take back the damaged item, or send parts to repair the item
depending on the severity of the damage. A full replacement will be issued
only under our discretion. Under certain authorized venders who carry our
products, shipping damages that require a full replacement will require
contacting the seller and not Moklebabath.com .
All shipping damages must be reported within 30 days of delivery. Missing or
lost items must be reported within 7 days of delivery.
The customer must also notify the local authorities to obtain a police report
if the tracking information shows the item as being delivered, but not
received. A replacement part or unit will be shipped out only if these rules
are met. After the 30-day window for damaged items or 7 days for lost and
missing packages, Moklebabath.com reserves the right to not ship replacement
parts or complete units. No exceptions will be made and we will not be held
responsible.
MANUFACTURER’ S WARRANTY
Moklebabath.com provides a 3-year limited parts warranty for all range hoods,
and a I-year limited parts warranty for all bathtubs, tub filters, kitchen
sinks, shower heads, shower wands, and shower panels. Under this warranty, you
(the customer), is entitled to replacement parts at no cost to repair and
restore functionality if any part of the product were to fail. No labor is
provided. Certain consumables that are not covered under this warranty
include:
Lights (halogen and LEDs)
Carbon Filters
Mesh or Baffle Filters
Ducting
The above parts are guaranteed to last one year beginning from the date of purchase. If they fail prematurely or are defective within 1 year of purchase, Moklebabath.com will replace them at nocharge.
If a main unit or complete replacement has to be sent, Moklebabath.com will require that the customer pay for shipping. Shipping for parts are free under the warranty period.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>